Firing stability of phosphorus-doped polysilicon passivating contacts: Factors affecting the degradation behavior
Source abstract
Abstract
Abstract We investigate the impact of firing treatments on n-type silicon samples passivated by ex-situ phosphorus-doped polysilicon (poly-Si)/SiOx structures, and identify factors affecting the firing response. Our samples show stable surface passivation upon firing at temperatures from 600 °C to 750 °C but exhibit a substantial increase in the recombination current density parameter J0 when the peak firing temperature reaches 800 °C. The extent of degradation is found to also be affected by various processing parameters, such as the means of oxide growth, the poly-Si deposition conditions, and the subsequent phosphorus diffusion. Particularly, the degradation extent appears to increase with poly-Si deposition temperature, possibly associated with changes in the crystal structure. Moreover, phosphorus diffusions performed at a lower temperature leads to stronger firing impact, which could be attributed to the lighter doping concentration in the poly-Si film. In addition, dielectric coatings show the most obvious influence on the firing behavior. Samples fired without the presence of dielectric capping layers suffered the most pronounced degradations in J0, whereas samples coated with SiNx/AlOx stacks or SiNx single layer with high refractive index above 2 exhibit minimum firing impact. It is speculated that hydrogen diffusion is responsible for the changes in surface passivation quality of the poly-Si/SiOx passivating contacts. The hypothesis explains the stronger firing impact on samples with lighter doping and lower crystallinity, which determines the diffusion of hydrogen upon firing and hence the amount of hydrogen present in the poly-Si/SiOx structure, and especially at the oxide interface.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Semiconductor materials and interfaces · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Surface recombination velocity of highly doped n-type silicon10.1063/1.363250 ↗
2. Peibst · 2014
3. 22.6% Efficient solar cells with polysilicon passivating contacts on n-type solar-grade wafers10.1002/solr.201900297 ↗
4. Perimeter Recombination in 25%-efficient IBC solar sells with passivating polo contacts for both polarities10.1109/JPHOTOV.2017.2762592 ↗
5. Carrier-selective contacts for Si solar cells10.1063/1.4875904 ↗
6. A passivating contact for silicon solar cells formed during a single firing thermal annealing10.1038/s41560-018-0239-4 ↗
7. Working principle of carrier selective poly-Si/c-Si junctions: is tunnelling the whole story?10.1016/j.solmat.2016.05.045 ↗
8. Passivating contacts for silicon solar cells based on boron-diffused recrystallized amorphous silicon and thin dielectric interlayers10.1016/j.solmat.2016.03.033 ↗
9. SiO2 surface passivation layers – a key technology for silicon solar cells10.1016/j.solmat.2018.04.029 ↗
10. Carrier population control and surface passivation in solar cells10.1016/j.solmat.2018.04.026 ↗
11. Effect of silicon oxide thickness on polysilicon based passivated contacts for high-efficiency crystalline silicon solar cells10.1016/j.solmat.2018.05.011 ↗
12. Heavily doped polysilicon-contact solar cells10.1109/EDL.1985.26155 ↗
13. Recombination analysis of phosphorus-doped nanostructured silicon oxide passivating electron contacts for silicon solar cells10.1109/JPHOTOV.2017.2779871 ↗
14. Polysilicon passivated junctions: the next technology for silicon solar cells?10.1016/j.joule.2021.02.013 ↗
15. n-Type polysilicon passivating contact for industrial bifacial n-type solar cells10.1016/j.solmat.2016.06.034 ↗
16. Laser contact openings for local poly-Si-metal contacts enabling 26.1%-efficient POLO-IBC solar cells10.1016/j.solmat.2018.06.020 ↗
17. Surface passivation of crystalline silicon solar cells: present and future10.1016/j.solmat.2018.06.047 ↗
18. Passivating contacts and tandem concepts: approaches for the highest silicon-based solar cell efficiencies10.1063/1.5139202 ↗
19. JinkoSolar · 2021
20. LONGi · 2021
21. Study of screen printed metallization for polysilicon based passivating contacts10.1016/j.egypro.2017.09.242 ↗
22. On the influence of the SiNx composition on the firing stability of poly-Si/SiNx stacks10.1002/pssa.202000333 ↗
23. Feldmann · 2019 · 304
24. On the hydrogenation of Poly-Si passivating contacts by Al2O3 and SiNx thin films10.1016/j.solmat.2020.110592 ↗
25. Full wafer size IBC cell with polysilicon passivating contacts
26. Vibrational spectra of hydrogen in silicon and germanium10.1002/pssb.2221180202 ↗
27. Optical, structural and electrical properties of device-quality hydrogenated amorphous silicon-nitrogen films deposited by plasma-enhanced chemical vapur deposition10.1080/13642819808206395 ↗
28. Scherrer after sixty years: a survey and some new results in the determination of crystallite size10.1107/S0021889878012844 ↗
29. P. Scherrer, Bestimmung der Größe und der inneren Struktur von Kolloidteilchen mittels Röntgenstrahlen.
30. A simple growth method for Nb2O5 films and their optical properties10.1039/C5RA05074J ↗
31. Quasi-steady-state photoconductance, a new method for solar cell material and device characterization
32. Measurement of the emitter saturation current by a contactless photoconductivity decay method
33. 24.58% total area efficiency of screen-printed, large area industrial silicon solar cells with the tunnel oxide passivated contacts (i-TOPCon) design10.1016/j.solmat.2019.110258 ↗
34. Thermal stability of the Al2O3 passivation on p-type silicon surfaces for solar cell applications10.1002/pssr.200903209 ↗
35. The formation mechanism for printed silver-contacts for silicon solar cells10.1038/ncomms11143 ↗
36. Influence of PECVD deposition temperature on phosphorus doped poly-silicon passivating contacts10.1016/j.solmat.2019.110348 ↗
37. Effects of PECVD temperature and RF power on surface structure and refractive index of amorphous and polycrystalline silicon films10.1088/1742-6596/917/3/032029 ↗
38. Large grain polycrystalline silicon by low‐temperature annealing of low‐pressure chemical vapor deposited amorphous silicon films10.1063/1.341065 ↗
39. Relationships between diffusion parameters and phosphorus precipitation during the POCl3 diffusion process10.1016/j.egypro.2013.07.275 ↗
40. High efficiency n-type silicon solar cells with passivating contacts based on PECVD silicon films doped by phosphorus diffusion10.1016/j.solmat.2019.01.005 ↗
41. Chen · 2007
42. Hydrogen diffusion in silicon from PECVD silicon nitride
43. Molecular hydrogen formation in hydrogenated silicon nitride10.1063/1.2396900 ↗
44. Weeber · 2005 · 1043
45. Influence of the high-temperature “firing” step on high-rate plasma deposited silicon nitride films used as bulk passivating antireflection coatings on silicon solar cells10.1116/1.1609481 ↗
46. Deuterium passivation of grain‐boundary dangling bonds in silicon thin films10.1063/1.92934 ↗
47. Influence of grain boundaries on hydrogen transport in polycrystalline silicon10.1016/S0022-3093(98)00344-5 ↗
48. Modelling of hydrogen transport in silicon solar cell structures under equilibrium conditions10.1063/1.5016854 ↗
49. Hydrogen in crystalline semiconductors10.1007/BF00615975 ↗
50. Kang · 2021