An in-depth investigation of BaO2/BaO redox oxides for reversible solar thermochemical energy storage
Source abstract
Abstract
Abstract An in-depth investigation of the BaO2/BaO redox couple for reversible solar thermochemical energy storage has been performed. Beyond improving the cyclability and energy storage density of the material, an additional objective of this work is to better understand inconsistencies in the literature surrounding this chemistry. Sintering of BaO2/BaO is a hindrance for practical high temperature energy storage. MgO-stabilized BaO-based materials were synthesized by co-precipitation methods and investigated for improving the longevity and reactivity of the redox materials. The effect of the calcination environment during synthesis on sample purity was evaluated. Energy storage capacity and stability of commercial BaO2 and BaO2 made by co-precipitation methods were compared over 25 consecutive redox cycles. The effect of different amounts of MgO was studied, and it was discovered that with increasing amounts of MgO, the stability and reactivity of BaO2 increases while the energy storage density decreases. 15 wt% MgO/BaO2 exhibits the greatest stable weight gain/loss with a value of 6.62% (estimated 338 kJ/kg). A BaO2/MgO sample with 33 wt% MgO shows good storage capacity with weight gain/loss at 5.65% (corresponds to approximately 290 kJ/kg) over 200 redox cycles.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Adsorption and Cooling Systems · Chemical Looping and Thermochemical Processes · Thermal Expansion and Ionic Conductivity
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Review on concentrating solar power plants and new developments in high temperature thermal energy storage technologies10.1016/j.rser.2015.09.026 ↗
2. Concentrating solar power10.1021/acs.chemrev.5b00397 ↗
3. A review on high temperature thermochemical heat energy storage10.1016/j.rser.2013.12.014 ↗
4. ENERGY-STORAGE using the reversible oxidation OF barium oxide10.1016/0038-092X(78)90078-6 ↗
5. Revisiting the BaO2/BaO redox cycle for solar thermochemical energy storage10.1039/C5CP07777J ↗
6. Wong · 2011 · 10
7. Exploitation of thermochemical cycles based on solid oxide redox systems for thermochemical storage of solar heat. Part 4: screening of oxides for use in cascaded thermochemical storage concepts10.1016/j.solener.2016.04.034 ↗
8. Thermochemical heat storage based on the Mn2O3/Mn3O4 redox couple: influence of the initial particle size on the morphological evolution and cyclability10.1039/C4TA03409K ↗
9. Improving the thermochemical energy storage performance of the Mn2O3/Mn3O4 redox couple by the incorporation of iron10.1002/cssc.201500148 ↗
10. Manganese oxide-based thermochemical energy storage: modulating temperatures of redox cycles by Fe–Cu co-doping10.1016/j.est.2015.12.005 ↗
11. The reduction and oxidation behaviour of manganese oxides10.1016/S0920-5861(98)00296-X ↗
12. Solar electricity via an Air Brayton cycle with an integrated two-step thermochemical cycle for heat storage based on Co3O4/CoO redox reactions: thermodynamic analysis10.1016/j.solener.2015.05.045 ↗
13. Solar electricity via an Air Brayton cycle with an integrated two-step thermochemical cycle for heat storage based on Co3O4/CoO redox reactions III: solar thermochemical reactor design and modeling10.1016/j.solener.2017.05.003 ↗
14. Solar electricity via an Air Brayton cycle with an integrated two-step thermochemical cycle for heat storage based on Co3O4/CoO redox reactions II: kinetic analyses10.1016/j.solener.2015.08.038 ↗
15. Solar thermochemical heat storage via the Co3O4/CoO looping cycle: storage reactor modelling and experimental validation10.1016/j.solener.2017.01.052 ↗
16. Vahedi · 2019
17. Agrafiotis · 2014
18. Chemical energy-storage BY the reaction cycle CUO/CU2O10.1002/er.4440130107 ↗
19. High-temperature energy storage: kinetic investigations of the CuO/Cu2O reaction cycle10.1021/acs.energyfuels.6b02343 ↗
20. Doped calcium manganites for advanced high-temperature thermochemical energy storage10.1002/er.3467 ↗
21. Lithium manganese oxides as high-temperature thermal energy storage system10.1016/j.tca.2016.07.018 ↗
22. Techno-economic assessment of solid–gas thermochemical energy storage systems for solar thermal power applications10.1016/j.energy.2017.11.084 ↗
23. ENERGY-STORAGE using the BAO2-BAO reaction cycle
24. Monolithic ceramic redox materials for thermochemical heat storage applications in CSP plants10.1016/j.egypro.2014.03.089 ↗
25. A review on high-temperature thermochemical energy storage based on metal oxides redox cycle10.1016/j.enconman.2018.05.017 ↗
26. Equilibrium and reaction rate of reversible BaO-BaO2 reaction for oxygen production10.1252/jcej.34.279 ↗
27. Adsorption and desorption characteristics of barium oxide at high temperature10.1016/j.apsusc.2009.12.130 ↗
28. Preparation of single-phase three-component alkaline earth oxide of (BaSrMg)O: a high capacity and thermally stable chemisorbent for oxygen separation10.1039/C4TA05045B ↗
29. BaxSr1-xO/MgO nano-composite sorbents for tuning the transition pressure of oxygen: application to air separation10.1016/j.ces.2015.06.050 ↗
30. Reactivation by steam hydration of sorbents for fluidized-bed calcium looping10.1021/acs.energyfuels.5b00413 ↗
31. Enhancement in cyclic stability of the CO2 adsorption capacity of CaO-based sorbents by hydration for the calcium looping cycle10.1016/j.jtice.2013.06.019 ↗
32. Steam hydration reactivation of CaO-based sorbent in cyclic carbonation/calcination for CO2 capture10.1021/ef4007214 ↗
33. Effect of steam on the performance of Ca-based sorbents in calcium looping processes10.1016/j.powtec.2016.11.062 ↗
34. The mechanism of vapor phase hydration of calcium oxide: implications for CO2 capture10.1021/es5034662 ↗
35. (2) superheating as a low-attrition steam reactivation method for CaO in calcium looping applications10.1021/ie100265x ↗
36. Synthesis of highly efficient, Ca-based, Al2O3-stabilized, carbon gel-templated CO2 sorbents10.1002/adma.201104787 ↗
37. Durability of CaO-CaZrO3 sorbents for high-temperature CO2 capture prepared by a wet chemical method10.1021/ef4020845 ↗
38. Solar thermochemical energy storage through carbonation cycles of SrCO3/SrO supported on SrZrO310.1002/cssc.201501023 ↗
39. Behavior of CaTiO3/nano-CaO as a CO2 reactive adsorbent10.1021/ie900900r ↗
40. Enhanced cyclic stability of CO2 adsorption capacity of CaO-based sorbents using La2O3 or Ca12Al14O33 as additives10.1007/s11814-010-0469-z ↗
41. High temperature CaO/Y2O3 carbon dioxide absorbent with enhanced stability for sorption-enhanced reforming applications10.1021/ie2015334 ↗
42. A novel calcium looping absorbent incorporated with polymorphic spacers for hydrogen production and CO2 capture10.1039/C4EE01281J ↗
43. Investigation into SrO/SrCO3 for high temperature thermochemical energy storage10.1016/j.solener.2017.11.073 ↗
44. Thermochemical energy storage via isothermal carbonation-calcination cycles of MgO-stabilized SrO in the range of 1000–1100 °C10.1016/j.solener.2019.06.046 ↗
45. Effect of barium content and sample size of BaO2-MgO oxygen acceptor on reaction rate10.1021/ie049273j ↗