Design of high-temperature solar-selective coatings for application in solar collectors
Source abstract
Abstract
Abstract We present a comprehensive theoretical design and evaluation study for the performance of nano-composite metal-dielectric absorbers combined with selective filters for high temperature applications in high concentration solar energy harvesting, e.g. in parabolic trough collectors. Improving the spectrally selective coating of the receiver and optimizing the operating temperature above the current standard of 400 °C represent a good opportunity for improving the efficiency of solar collectors and thus reducing the cost of solar electricity. The objective of our effort is to get the design rules for efficient selective coatings in higher temperatures exhibiting maximum absorption in the solar spectrum and minimum emissivity in the infrared spectrum. While these optical characteristics are the required ones for maximum energy conversion efficiency, they become increasingly difficult to satisfy for increasing temperatures because of the overlapping of the two spectral regions. Using finite-difference time-domain simulations we model different nano-composite metal-dielectric coatings, composed of materials that are stable at high temperatures, combined with spectrally selective filters and calculate the solar absorption and thermal emission coefficients. Taking also into account the optical parameters of the collector structure (sunlight concentration factor and optical losses) and the theoretically predicted Carnot efficiency, we get the total conversion efficiency of a solar collector. We evaluate the performance of the designed coatings for a wide temperature range from 400 °C up to 1000 °C and obtain maximum efficiencies at ~850 °C operating temperature. For our best coating candidate (Cu nanoparticles in a low index dielectric matrix, e.g. SiO 2 ) this results into a total conversion efficiency of 52%, or about a 30% performance increase compared to operation at 400 °C.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solar Thermal and Photovoltaic Systems · Photovoltaic System Optimization Techniques · Solar-Powered Water Purification Methods
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (67)
Show source-provided references
1. Renewables 2016 Global Status Report, Renewable Energy Policy Network for the 21st Century (REN21), REN21 Secretariat, Paris, 2016. 〈http://www.ren21.net〉.
2. PVPS Report: A Snapshot of Global PV 1992–2014, International Energy Agency (IEA), Report IEA PVPS T1-26, 2015. 〈http://www.iea-pvps.org〉.
3. Kreith · 2007
4. Saving for a rainy day10.1126/science.334.6058.922 ↗
5. Performance enhancement of solar collectors-a review10.1016/j.rser.2015.04.087 ↗
6. Innovation in concentrated solar power10.1016/j.solmat.2011.05.020 ↗
7. Parabolic-trough solar collectors and their applications10.1016/j.rser.2010.03.012 ↗
8. Advanced in solar thermal electricity technology10.1016/S0038-092X(03)00102-6 ↗
9. Solar thermal collectors and applications10.1016/j.pecs.2004.02.001 ↗
10. Coatings for enhanced photothermal energy collection, I. Selective absorbers10.1016/0165-1633(79)90001-7 ↗
11. Review of physical vapor deposited (PVD) spectrally selective coatings for mid- and high- temperature solar thermal applications10.1016/j.solmat.2011.10.028 ↗
12. C.E. Kennedy, Review of mid to high temperature solar selective absorber materials, NREL report, NREL/TP-520-31267,, July 2002.10.2172/15000706 ↗
13. Solar Energy Materials10.1002/adma.200300378 ↗
14. Coatings for concentrating solar systems-a review10.1016/j.rser.2015.01.015 ↗
15. Spectrally selective paint coatings: preparation and characterization10.1016/S0927-0248(00)00367-6 ↗
16. Chemical vapor deposition of thin semiconductor films for solar energy conversion10.1016/0040-6090(76)90626-X ↗
17. High performance multi-scaled nanostructured spectrally selective coating for concentrating solar power10.1016/j.nanoen.2014.06.016 ↗
18. Performance and stability of some new high temperature selective absorber systems based on metal/dielectric multilayer10.1016/0927-0248(94)90001-9 ↗
19. Thermal stability studies of sputter deposited multi-layer selective absorber coatings10.1016/0040-6090(82)90618-6 ↗
20. Nickel pigmented anodic aluminum oxide for selective absorption of solar energy10.1063/1.327337 ↗
21. Spectrally selective composite coatings of Cr-Cr2O3 and Mo-Al2O3 for solar energy applications10.1016/S0040-6090(01)01051-3 ↗
22. Spectrally selective ultra-high temperature ceramic absorbers for high-temperature solar plants10.1063/1.4717515 ↗
23. Recent progress in high-temperature solar selective coatings10.1016/S0927-0248(99)00136-1 ↗
24. Optical design and co-sputtering preparation of high performance Mo-SiO2 cermet solar selective absorbing coating10.1016/j.apsusc.2013.04.142 ↗
25. Broadband optical absorption of amorphous carbon/Ag nanocomposite films and its potential for solar harvesting applications10.1016/j.solmat.2013.06.019 ↗
26. Enchanced thermal stability of W-Ni-Al2O3 cermet-based spectrally selective solar absorbers with tungsten infrared reflectors
27. Improvements in the design of solar selective thin film absorbers10.1016/0030-4018(77)90397-2 ↗
28. Sputter etched metal solar selective absorbing surfaces for high temperature thermal collectors10.1016/0165-1633(81)90079-4 ↗
29. Experimental methods for the preparation of selectively absorbing textured surfaces for photothermal solar conversion10.1016/0165-1633(80)90028-3 ↗
30. Mechanically manufactured selective solar absorber surfaces10.1016/S0927-0248(02)00411-7 ↗
31. Design and global optimization of high-efficiency solar thermal systems with tungsten cermets10.1364/OE.19.00A245 ↗
32. Computational design for a wide-angle cermet-based solar selective absorber for high temperature applications10.1016/j.jqsrt.2013.03.004 ↗
33. Optimizing analysis of W-AlN cermet solar absorbing coatings10.1088/0022-3727/34/21/303 ↗
34. Computer simulation of the optical properties of high-temperature cermet solar selective coatings10.1016/j.solener.2004.09.024 ↗
35. A novel design in composities of various materials for solar selective coatings10.1016/S0927-0248(01)00108-8 ↗
36. A review of cermet-based spectrally selective solar absorber10.1039/c3ee43825b ↗
37. C.E. Kennedy, H. Price, Progress in development of high-temperature solar selective coating, in: Proceedings of the International Solar Energy Conference (ISEC). 2005-76039.10.1115/ISEC2005-76039 ↗
38. Solar selective coatings for concentrating solar power Central Recivers
39. Opportunities and challenges for a sustainable energy future10.1038/nature11475 ↗
40. Maier · 2007
41. Plasmonic materials for energy: from physics to applications10.1016/j.mattod.2013.09.003 ↗
42. Selective modification of nanoparticle arrays by laser-induced self assembly (MONA-LISA): putting control into bottom-up plasmonic nanostructuring10.1039/C5NR09192F ↗
43. Solarthermal processing: a review10.1115/1.1349552 ↗
44. Jackson · 1999
45. Effective medium properties and photonic crysal superstructures of metallic nanoparticle arrays10.1063/1.2709863 ↗
46. Taflove · 2005
47. Palik · 1998
48. Optical constants from the far infrared to the x-ray region: Mg, Al, Cu, Ag, Au and Al2O310.1364/JOSA.65.000742 ↗
49. The effect of metal dispersion on the resonance of antennas at infrared frequencies10.1016/j.infrared.2008.12.002 ↗
50. Optical Properties of fourteen metals in the infrared: Al, Co, Cu, Au, Fe, Pb, Mo, Ni, Pd, Pt, Ag, Ti, V and W10.1364/AO.24.004493 ↗
51. Reflectivity of metals at high temperatures10.1063/1.1661506 ↗
52. Molding of plasmonic resonances in metallic nanostructures: dependence of the nonlinear electric permittivity on system size and temperature10.3390/ma6114879 ↗
53. High temperature Nanoplasmonics: the key role of nonlinear effects10.1021/ph500326c ↗
54. Temperature dependence of the surface plasmon resonance in gold nanoparticles10.1016/j.susc.2012.10.019 ↗
55. Resonant-cavity enhanced thermal emission
56. Ashcroft · 1976
57. Electrical resistivity of ten binary alloy systems10.1063/1.555684 ↗
58. Surface-enhanced Raman Spectroscopy of graphene10.1021/nn1010842 ↗
59. Effective medium models of inhomogeneous materials10.1364/AO.20.000026 ↗
60. Metal-insulator phase transition in a VO2 thin film observed with terahertz spectroscopy10.1103/PhysRevB.74.205103 ↗
61. Product information: Parabolic Mirrors for Concentrating Solar Power (CSP), 〈http://www.flabeg-fe.com〉.
62. Comparison of solar concentrators10.1016/0038-092X(76)90043-8 ↗
63. Interspecimen Comparison of the Refractive Index of Fused Silica10.1364/JOSA.55.001205 ↗
64. Mid-infrared optical properties of thin films of aluminum oxide, titanium dioxide, silicon dioxide, aluminum nitride, and silicon nitride10.1364/AO.51.006789 ↗
65. Transparent conductors as solar energy materials: a panoramic review10.1016/j.solmat.2007.04.031 ↗
66. Mobility and carrier density in nanoporous indium tin oxide films10.1103/PhysRevB.83.212201 ↗
67. Electrical and optical properties of thin films consisting of tin-doped indium oxide nanoparticles10.1103/PhysRevB.68.155410 ↗