Direct comparison of atomic layer deposition and sputtering of In2O3:H used as transparent conductive oxide layer in CuIn1−xGaxSe2 thin film solar cells
Source abstract
Abstract
In this study thin films of hydrogenated In 2O 3 (IOH) were fabricated by physical vapor deposition (PVD) with and without a post-annealing step, and by atomic layer deposition (ALD). The electro-optical properties on glass as well as the performance as a transparent conductive oxide (TCO) layer in CuIn 1−xGa xSe 2 (CIGSe)-based solar cells are compared and related to a ZnO:Al (AZO) baseline TCO. Corresponding TCO film thicknesses were adjusted to a resulting sheet resistance of about R sh = 20 Ω/sq for all samples. Structural investigations were conducted by X-ray diffraction (XRD) and transmission electron microscopy (TEM), while Hall and optical absorption measurements were performed to analyze the electrical and optical quality of the window layers. It is shown that the fully crystallized IOH layers processed by ALD and PVD show similar microstructural and electro-optical properties, which are superior to the AZO baseline. The finalized solar cells were characterized by current-voltage and reflectance-corrected quantum efficiency measurements. While there is no significant gain in short circuit current density ( J sc) for as-deposited PVD In 2O 3 layers, the application of crystalline In 2O 3 TCOs leads to an improvement of more than 2 mA/cm 2 due to an increase in “optical” band gap energy and less free charge carrier absorption (FCA). The open circuit voltage ( V oc) of the best cells is 10–15 mV higher as compared to the AZO reference, independent of the crystallinity and process of the In 2O 3 films. The results indicate that the gain in V oc is due to inherent material properties of the IOH films and does not originate from less sputter damage or an affected i-ZnO/TCO interface. Device simulations show that the higher electron affinity χ of the IOH can explain an increased V oc if the Fermi level ( E F ) is pinned at the CIGSe/CdS interface and why it might not be possible to see the gain when alternative buffer layers are applied.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Copper-based nanomaterials and applications · ZnO doping and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Hydrogen-doped In2O3 as high-mobility transparent conductive oxide10.1143/JJAP.46.L685 ↗
2. Atomic layer deposition of In2O3 transparent conductive oxide layers for application in Cu(In,Ga)Se2 solar cells with different buffer layers10.1002/pssa.201532883 ↗
3. Electron scattering and doping mechanisms in solid-phase- crystallized In2O3:H prepared by atomic layer deposition10.1021/acsami.5b04420 ↗
4. Tin doped indium oxide thin films : electrical properties10.1063/1.367025 ↗
5. Correlation between oxygen stoichiometry, structure, and opto-electrical properties in amorphous In2O3:H films correlation between oxygen stoichiometry, structure, and opto-electrical properties in amorphous In2O3:H films10.1063/1.3696978 ↗
6. Reduction of optical loss in hydrogenated amorphous silicon/crystalline silicon heterojunction solar cells by high-mobility hydrogen-doped in 2O3 transparent conductive oxide10.1143/APEX.1.041501 ↗
7. Hydrogen-doped In2O3 transparent conducting oxide films prepared by solid-phase crystallization method10.1063/1.3284960 ↗
8. High mobility In2O3:H as contact layer for a-Si:H/c-Si heterojunction and μc-Si:H thin film solar cells10.1016/j.tsf.2015.03.022 ↗
9. Optimization of the post-deposition annealing process of high-mobility In2O3:H for photovoltaic applications10.1016/j.tsf.2015.12.054 ↗
10. Sputtered Zn(O,S)/In2O3:H window layers for enhanced blue response of chalcopyrite solar cells
11. Transparent conducting oxides for photovoltaics: manipulation of fermi level, work function and energy band alignment10.3390/ma3114892 ↗
12. Nature of the band gap of In2O3 revealed by first-principles calculations and X-ray spectroscopy10.1103/PhysRevLett.100.167402 ↗
13. Electronic structure of In2O3 from resonant x-ray emission spectroscopy10.1063/1.3070524 ↗
14. Band gap, electronic structure, and surface electron accumulation of cubic and rhombohedral In2O310.1103/PhysRevB.79.205211 ↗
15. High mobility In2O3:H transparent conductive oxides prepared by atomic layer deposition and solid phase crystallization10.1002/pssr.201409426 ↗
16. Indium oxide atomic layer deposition facilitated by the synergy between oxygen and water10.1021/cm103637t ↗
17. Hydrogenated indium oxide window layers for high-efficiency Cu(In,Ga)Se2 solar cells10.1063/1.4921445 ↗
18. Improved open-circuit voltage in Cu(In,Ga)Se2 solar cells with high work function transparent electrodes10.1063/1.4922351 ↗
19. Potential gain in photocurrent generation for Cu(In,Ga)Se2 solar cells by using In2O3 as a transparent conductive oxide layer10.1002/pip.2655 ↗
20. Thin-film solar cells: device measurements and analysis10.1002/pip.518 ↗
21. Buffer layers and transparent conducting oxides for chalcopyrite Cu(In,G)a)(S,Se)2 based thin film photovoltaics: present status and current developments10.1002/pip.955 ↗
22. Amorphous transparent conducting oxides in context: Work function survey, trends, and facile modification10.1016/j.apsusc.2015.01.026 ↗
23. Modelling polycrystalline semiconductor solar cells10.1016/S0040-6090(99)00825-1 ↗