“Zero-charge” SiO2/Al2O3 stacks for the simultaneous passivation of n+ and p+ doped silicon surfaces by atomic layer deposition
Source abstract
Abstract
To achieve high conversion efficiencies, advanced silicon solar cell architectures such as interdigitated back contact solar cells demand that defects at both the n+ and p+ doped Si surfaces are passivated simultaneously by a single passivation scheme. In this work, corona charging experiments show that the fixed charge density Qf is a key parameter governing the passivation of both surface types. Alternatively, Qf can be controlled from strongly negative to even positive values by carefully tuning the SiO2 interlayer thickness in SiO2/Al2O3 stacks prepared by atomic layer deposition (ALD). This control in Qf allows for a superior passivation of n+ Si surfaces by SiO2/Al2O3 stacks compared to a single layer Al2O3. For instance, for SiO2 interlayer thicknesses of ~3–14 nm, the recombination parameter of an n+ Si surface having a high surface doping concentration Ns of 2×1020 cm−3 was reduced from J0n+=81 fA/cm2 to J0n+=50 fA/cm2. Simulations predict that the SiO2/Al2O3 stacks outperform Al2O3 passivation layers particularly on n+ Si surfaces having a moderate Ns in the range of 1018–1020 cm−3. On p+ Si surfaces, J0p+≤54 fA/cm2 was achieved for all ALD SiO2 interlayer thicknesses investigated (i.e., 1–14 nm). The SiO2/Al2O3 stacks presented in this work are compatible with SiNx capping and subsequent high-temperature firing steps, which are typically used in solar cell processing. Furthermore, the results were successfully reproduced in an industrial ALD batch reactor using a low-temperature process. This makes ALD SiO2/Al2O3 stacks a promising candidate for the simultaneous passivation of n+ and p+ Si surfaces in solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Semiconductor materials and devices · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Ultralow surface recombination of c-Si substrates passivated by plasma-assisted atomic layer deposited Al2O310.1063/1.2240736 ↗
2. Excellent passivation of highly doped p-type Si surfaces by the negative-charge-dielectric Al2O310.1063/1.2784168 ↗
3. Very low surface recombination velocities on p-type silicon wafers passivated with a dielectric with fixed negative charge10.1016/j.solmat.2006.04.014 ↗
4. Status and prospects of Al2O3-based surface passivation schemes for silicon solar cells10.1116/1.4728205 ↗
5. Effective SiNx:H capping layers on 1nm Al2O3 for p+ surface passivation10.1109/JPHOTOV.2014.2344757 ↗
6. Boron emitter passivation with Al2O3 and Al2O3/SiNx stacks using ALD Al2O310.1109/JPHOTOV.2012.2226145 ↗
7. Dielectric charge tailoring in PECVD SiO2/SiNx stacks and application at the rear of Al local back surface field Si wafer solar cells10.1109/JPHOTOV.2015.2419132 ↗
8. Surface passivation of high-efficiency silicon solar cells by atomic-layer-deposited Al2O310.1002/pip.823 ↗
9. High efficiency n-type Si solar cells on Al2O3-passivated boron emitters10.1063/1.2945287 ↗
10. Atomic layer deposition for photovoltaics: applications and prospects for solar cell manufacturing10.1088/0268-1242/27/7/074002 ↗
11. S. Bordihn, G. Dingemans, V. Mertens and W.M.M. Kessels, Passivation of n+ -type Si surfaces by low temperature processed SiO2 /Al2O3 stacksIEEE J. Photovolt. Volume 3, Issue 3, 2013, pp. 925-92910.1109/JPHOTOV.2013.2248415 ↗
12. Surface passivation of phosphorus-diffused n+-type emitters by plasma-assisted atomic-layer deposited Al2O310.1002/pssr.201105445 ↗
13. Controlling the fixed charge and passivation properties of Si(100)/Al2O3 interfaces using ultrathin SiO2 interlayers synthesized by atomic layer deposition10.1063/1.3658246 ↗
14. Effective passivation of Si surfaces by plasma deposited SiOx/a-SiNx:H stacks10.1063/1.3595940 ↗
15. Near surface inversion layer recombination in Al2O3 passivated n-type silicon10.1063/1.4891021 ↗
16. Experimental evidence of parasitic shunting in silicon nitride rear surface passivated solar cells10.1002/pip.420 ↗
17. T. Shoji, K. Kakushima, Y. Kataoka, A. Nishiyama, N. Sugii, H. Wakabayashi, K. Tsutsui, K. Natori, H. Iwai, Effect of surface potential control and interface states for silicon nanowire solar cells. in: Proceedings of the 29th EU-PVSEC, pp. 844–847, 2014. 10.4229/EUPVSEC20142014-2AV.2.12.
18. Progress in surface passivation of heavily doped n-type and p-type silicon by plasma-deposited AlOx/SiNx dielectric stacks10.1109/JPHOTOV.2013.2270350 ↗
19. S. Duttagupta, B. Hoex, A.G. Aberle, Progress with industrially-feasible excellent surface passivation of heavily-doped p-type and n-type crystalline silicon by PECVD SiOx/SiNx with optimised anti-reflective performance. in: Proceedings of the 28th European PVSEC, pp. 993–996, 2013. 10.4229/28thEUPVSEC2013-2CO.4.6.
20. F. Lin, S. Duttagupta, A.G. Aberle, B. Hoex, Excellent passivation of n+ and p+ silicon by PECVD SiOx/AlOx stacks. in: Proceedings of the 27th European Photovoltaic Solar Energy Conference Exhibition, pp. 1251–1254, 2012. 10.4229/27thEUPVSEC2012-2AV.6.21.
21. Passivation of phosphorus diffused silicon surfaces with Al2O3: influence of surface doping concentration and thermal activation treatments10.1063/1.4903988 ↗
22. D.S. Saynova, et al. Dielectric passivation schemes for high efficiency n-Type c-Si Solar Cells. in: Proceedings of the 28th EU-PVSEC, pp. 1188–1193, 2013 10.4229/28thEUPVSEC2013-2BV.1.46.
23. Aluminum oxide and other ALD materials for Si surface passivation10.1149/1.3633680 ↗
24. Properties of the c-Si/Al2O3 interface of ultrathin atomic layer deposited Al2O3 layers capped by SiNx for c-Si surface passivation10.1063/1.4903483 ↗
25. Charge in SiO2–Al2O3 double layers on silicon10.1149/1.2403638 ↗
26. Aluminum oxide/silicon dioxide, double insulator MOS structure10.1002/j.1538-7305.1975.tb02861.x ↗
27. Influence of the SiO2 interlayer thickness on the density and polarity of charges in Si/SiO2/Al2O3 stacks as studied by optical second-harmonic generation10.1063/1.4857075 ↗
28. Silicon surface passivation by thin thermal oxide/PE-CVD layer stack systems10.1109/JPHOTOV.2011.2173299 ↗
29. Symmetrical Al2O3-based passivation layers for p- and n-type silicon10.1016/j.solmat.2014.06.005 ↗
30. Nitric acid pretreatment for the passivation of boron emitters for n-type base silicon solar cells10.1063/1.2870202 ↗
31. Influence of the oxidant on the chemical and field-effect passivation of Si by ALD Al2O310.1149/1.3501970 ↗
32. Hydrogen induced passivation of Si interfaces by Al2O3 films and SiO2/Al2O3 stacks10.1063/1.3497014 ↗
33. Plasma-assisted ALD for the conformal deposition of SiO2: process, material and electronic properties10.1149/2.067203jes ↗
34. Bordihn · 2014
35. Advanced front-surface passivation schemes for industrial n-type silicon solar cells
36. F.J. Ma, et al., Two-dimensional numerical simulation of boron diffusion for pyramidally textured silicon, J. Appl. Phys., 2014, pp. 184103 1-8, issue 116, http://dx.doi.org/10.1063/1.4901242.10.1063/1.4901242 ↗
37. D.E. Kane, R.M. Swanson, Measurement of the emitter saturation current by a contactless photoconductivity decay method, in: Proceeding of IEEE Photovoltaic Special Conference 18, 69, pp. 578–583 IEEE, Las Vegas, 1985.
38. Influence of the deposition temperature on the c-Si surface passivation by Al2O3 films synthesized by ALD and PECVD10.1149/1.3276040 ↗
39. K.J. Weber, et al., Surface passivation using dielectric films: how much charge is enough? in: Proceedings of the 24th EU-PVSEC 2009, pp. 534–537.
40. A freeware 1D emitter model for silicon solar cells
41. Improved parameterization of auger recombination in silicon10.1016/j.egypro.2012.07.034 ↗
42. Finite-temperature full random-phase approximation model of band gap narrowing for silicon device simulation10.1063/1.368545 ↗
43. The effects of phosphorus precipitation on the open-circuit voltage in N+/P silicon solar cells.10.1016/0379-6787(84)90114-5 ↗
44. Heavily doped Si:P emitters of crystalline Si solar cells: recombination due to phosphorus precipitation10.1002/pssr.201409138 ↗
45. Silicon surface passivation by aluminium oxide studied with electron energy loss spectroscopy10.1002/pssr.201308081 ↗
46. Si dangling-bond-type defects at the interface of (100)Si with ultrathin layers of SiOx, Al2O3, and ZrO210.1063/1.1448169 ↗
47. Variation of the layer thickness to study the electrical property of PECVD Al2O3/c-Si interface10.1016/j.egypro.2011.06.195 ↗
48. Impact of illumination level and oxide parameters on Shockley–Read–Hall recombination at the Si–SiO2 interface10.1063/1.350782 ↗
49. Investigation of electrical shading effects in back-contacted back-junction silicon solar cells using the two-dimensional charge collection probability and the reciprocity theorem10.1063/1.3524506 ↗
50. Silvaco Inc., Atlas Device Simulation Framework, St. Clara, CA, USA, 2015.
51. On effective surface recombination parameters10.1063/1.4886595 ↗
52. Effect of boron concentration on recombination at the p-Si–Al2O3 interface10.1063/1.4867643 ↗
53. Field effect passivation of high efficiency silicon solar cells10.1016/0927-0248(93)90075-E ↗
54. Auger coefficients for highly doped and highly excited silicon10.1063/1.89694 ↗
55. A unified mobility model for device simulation—I. Model equations and concentration dependence10.1016/0038-1101(92)90325-7 ↗