journal article·2015-01

Characterization of Cu2ZnSnSe4 solar cells prepared from electrochemically co-deposited Cu–Zn–Sn alloy

R. Kondrotas, R. Juškėnas, A. Naujokaitis, A. Selskis, R. Giraitis, Z. Mockus, S. Kanapeckaitė, G. Niaura, H. Xie, Y. Sánchez, E. Saucedo

Publisher page

Abstract

Cu–Zn–Sn (CZT) precursors for Cu2ZnSnSe4 (CZTSe) solar cell were prepared by electrochemical co-deposition method with different metals composition. CZT precursors were preliminary annealed in three different atmospheres in order to obtain homogenous, without pores Cu–Zn–Sn layers. A high crystalline quality CZTSe absorber was synthesised as has been determined by X-ray diffraction and Raman spectroscopy methods. CZTSe based solar cells were fabricated and champion cell demonstrated 2.7% efficiency and reached as high as 70% of external quantum efficiency. Scanning electron microscope investigations of CZTSe solar cells cross-section revealed that Mo/CZTSe interface exhibits large voids and local delamination from Mo layer. The back contact issues are detrimental to solar cell performance reducing shunt resistance and open circuit voltage.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Beyond 11% efficiency: characteristics of state-of-the-art Cu2ZnSn(S,Se)4 solar cells10.1002/aenm.201200348 ↗
2. Device characteristics of a 10.1% hydrazine-processed Cu2ZnSn(Se,S)4 solar cell10.1002/pip.1160 ↗
3. Growth mechanisms of co-evaporated kesterite: a comparison of Cu-rich and Zn-rich composition paths10.1002/pip.2296 ↗
4. Control of an interfacial MoSe2 layer in Cu2ZnSnSe4 thin film solar cells: 8.9% power conversion efficiency with a TiN diffusion barrier10.1063/1.4740276 ↗
5. Towards sustainable materials for solar Energy conversion: preparation and photoelectrochemical characterization of Cu2ZnSnS410.1016/j.elecom.2008.02.008 ↗
6. Preparation of Cu2ZnSnS4 thin films by sulfurizing electroplated precursors10.1016/j.solmat.2008.11.045 ↗
7. Kesterite absorber layer uniformity from electrodeposited pre-cursors10.1002/pssc.200881154 ↗
8. Preparation of Cu2ZnSnS4 thin films by sulphurization of coelectroplated Cu–Zn–Sn precursors10.1002/pssc.200881182 ↗
9. Cu2ZnSnS4 thin film solar cells from electroplated precursors: novel low-cost perspective10.1016/j.tsf.2008.11.061 ↗
10. The crystallisation of Cu2ZnSnS4 thin film solar cell absorbers from co-electroplated Cu–Zn–Sn precursors10.1016/j.tsf.2008.11.019 ↗
11. Preparation of Cu2ZnSnS4 thin films by sulfurization of co-electroplated Cu–Zn–Sn precursors10.1002/pssc.200881182 ↗
12. Synthesis and characterization of Cu2ZnSnS4 absorber layers by an electrodeposition-annealing route10.1016/j.tsf.2008.11.022 ↗
13. Single step electrosynthesis of Cu2ZnSnS4 (CZTS) thin films for solar cell application10.1016/j.electacta.2010.02.051 ↗
14. Effect of complexing agent on the properties of electrochemically deposited Cu2ZnSnS4 (CZTS) thin films10.1016/j.apsusc.2010.09.016 ↗
15. Preparation of Cu2ZnSnS4 films by electrodeposition using ionic liquids10.1016/j.solmat.2009.09.003 ↗
16. A 3.2% efficient Kesterite device from electrodeposited stacked elemental layers10.1016/j.jelechem.2010.01.008 ↗
17. Mechanistic aspects of preheating effects of electrodeposited mettalic precursors on structural and photovoltaic properties of Cu2ZnSnS4 thin films10.1016/j.solmat.2013.09.006 ↗
18. Formation of Cu2ZnSnSe4 thin films by selenization of electrodeposited stacked binary alloy layers10.1016/j.egypro.2010.07.012 ↗
19. Cu2ZnSnSe4 thin films prepared by selenization of co-electroplated Cu–Zn–Sn precursors10.1016/j.apsusc.2011.04.139 ↗
20. The next Frontier: electrodeposition for solar cell fabrication
21. Formation and characterization of single-step electrodeposited Cu2ZnSnS4 thin films: effect of complexing agent volume10.1016/j.egypro.2011.10.187 ↗
22. Phase composition of selenized Cu2ZnSnSe4 thin films determined by X-ray diffraction and Raman spectroscopy10.1016/j.tsf.2011.01.388 ↗
23. CZTS thin films on transparent conducting electrodes by electrochemical technique10.1016/j.tsf.2011.07.052 ↗
24. The Cu2ZnSnSe4 thin films solar cells synthesised by electrodeposition route10.1016/j.apsusc.2012.03.006 ↗
25. A High Efficiency Electrodeposited Cu2ZnSnS4 Solar Cell10.1002/aenm.201100526 ↗
26. Electrodeposited Cu2ZnSnSe4 thin film solar cell with 7% power conversion efficiency
27. Electrochemical studies of one-step electrodeposition of Cu–Zn–Sn layers from aqueous electrolytes for photovoltaic applications10.1149/2.105310jes ↗
28. A two-step approach for electrochemical deposition of Cu–Zn–Sn and Se precursors for CZTSe solar cells10.1016/j.solmat.2012.02.007 ↗
29. Cu2ZnSnSe4 thin films prepared by selenization of one-step electrochemically deposited Cu–Zn–Sn–Se precursors10.1016/j.apsusc.2013.02.088 ↗
30. Formation of Cu2ZnSnS4 absorber layers for solar cells by electrodeposition-annealing route10.1016/j.tsf.2013.04.038 ↗
31. Cu2ZnSnSe4 thin film solar cells prepared by rapid thermal annealing of co-electroplated Cu–Zn–Sn precursors10.1016/j.solener.2013.05.002 ↗
32. Single-step electrodeposition of a microcrystalline Cu2ZnSnSe4 thin film with a kesterite structure10.1016/j.electacta.2012.10.076 ↗
33. Selenisation of sequentially electrodeposited Cu–Zn and Sn precursor layers10.1016/j.tsf.2012.12.085 ↗
34. Pulsed electrodeposited CZTS thin films: effect of dutycycle10.1016/j.matlet.2013.06.062 ↗
35. Structural and compositional properties of CZTS thin films formed by rapid thermal annealing of electrodeposited layers10.1016/j.jcrysgro.2013.06.012 ↗
36. Electrodeposition of ternary CuxSnySz thin films for photovoltaic applications10.1002/pip.2386 ↗
37. Synthesis of Cu2ZnSnS4 films from co-electrodeposited Cu–Zn–Sn precursors and their microstructural and optical properties10.1016/j.apsusc.2013.06.050 ↗
38. Electrosynthesis of CZTS films by sulfurization of CZT precursor: effect of soft annealing treatment10.1016/j.apsusc.2013.06.024 ↗
39. Scragg · 2010
40. Electrochemical and XRD studies of Cu–Zn coatings electrodeposited in solution with D-mannitol10.1016/j.jelechem.2007.01.004 ↗
41. On the formation mechanisms of Zn-rich Cu2ZnSnS4 films prepared by sulfurization of metallic stacks10.1016/j.solmat.2013.01.015 ↗
42. Detection of a ZnSe secondary phase in coevaporated Cu2ZnSnSe4 thin films10.1063/1.3558706 ↗
43. ZnSe Etching of Zn-rich Cu2ZnSnSe4: an oxidation route for improved solar-cell efficiency10.1002/chem.201302589 ↗
44. Optical properties of high quality Cu2ZnSnSe4 thin films10.1063/1.3624827 ↗
45. Resonant Raman scattering in ZnS and ZnSe with the cadmium laser10.1016/0030-4018(70)90081-7 ↗
46. Resonance Raman scattering of single and stacked mono- and submono-layers of CdS in ZnSe10.1016/S0038-1098(99)00348-8 ↗
47. Formation of ZnSe and CdS quantum dots via laser ablation in liquids10.1016/S0009-2614(02)01534-8 ↗
48. Intrinsic point defects and complexes in the quaternary kesterite semiconductor Cu2ZnSnS410.1103/PhysRevB.81.245204 ↗