MOCVD of Cd(1−x)Zn(x)S/CdTe PV cells using an ultra-thin absorber layer
Source abstract
Abstract
Ultra-thin Cd(₁ ₋ ₓ)Zn(ₓ)S/CdTe devices were produced by atmospheric pressure metal organic chemical vapour deposition (AP-MOCVD) with varying CdTe absorber thicknesses ranging from 1.0 to 0.2 mm and compared to baseline cells with total CdTe thickness of 2.25μ. The ultra-thin CdTe layers (≤1 μm) were intentionally doped with As to induce p-type conductivity in the absorber. Cell performance reduced with CdTe thickness, with the magnitude of photo-current generation loss becoming more significant for the very thin CdTe layers. The decline in cell performance was lower than the optically limited performance relating to a decrease in shunt resistance, Rsh, especially for the thinnest cells due to areas of incomplete CdTe coverage and large presence of pin-holes leading to micro-shorts. Incorporation of Zn into the CdS window layer improved cell performance for all devices except when 0.2 μm thick CdTe was used. This improvement was markedly in the blue region owing to enhanced optical transparency of the window layer. External quantum efficiency (EQE) measurements showed a red-shift of the window layer absorption edge due to leaching out of Zn during the CdCl₂ treatment. Reduction of the CdCl₂ deposition time was demonstrated to recover the blue response of the ultra-thin cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. Numerical modeling of CdS/CdTe and CdS/CdTe/ZnTe solar cells as a function of CdTe thickness10.1016/j.solmat.2007.04.006 ↗
2. Materials issues in very thin CdTe for photovoltaics10.1016/j.tsf.2004.11.130 ↗
3. Towards ultra-thin CdTe solar cells using MOCVD10.1016/j.tsf.2008.10.093 ↗
4. Cadmium zinc sulfide films and heterojunctions10.1063/1.349384 ↗
5. MOCVD of thin film photovoltaic solar cells—next generation production technology?10.1016/j.jcrysgro.2008.07.121 ↗
6. Highly arsenic doped CdTe layers for the back contacts of CdTe solar cells10.1557/PROC-1012-Y12-08 ↗
7. In situ deposition of cadmium chloride films using MOCVD for CdTe solar cells10.1016/j.tsf.2006.12.043 ↗
8. The role of transparent conducting oxides in metal organic chemical vapour depostion of CdTe/CdS photovoltaic solar cells10.1016/j.tsf.2011.04.194 ↗
9. Thin-film CdTe cells: reducing the CdTe10.1016/j.tsf.2010.12.179 ↗
10. High efficiency ultra-thin sputtered CdTe solar cells10.1016/j.solmat.2006.02.029 ↗
11. Analysis of CdTe solar cells in relation to materials issues10.1016/j.tsf.2004.11.011 ↗
12. High-resolution laser beam induced current measurements on Cd0.9Zn0.1S/CdTe solar cells10.1016/j.egypro.2011.10.183 ↗
13. W.S.M. Brooks, S.J.C. Irvine, V. Barrioz, A.J. Clayton, Laser beam induced current measurements of Cd1−xZnxS/CdTe solar cells, Solar Energy Materials and Solar Cells, doi:10.1016/j-solmat.2012.02.006, in press.
14. Interfaces in CdTe solar cells: from idealised concepts to technology10.1557/PROC-865-F6.1 ↗
15. The effect of oxygen on interface microstructure evolution in CdS/CdTe solar cells10.1002/pip.426 ↗
16. Modelling polycrystalline semiconductor solar cells10.1016/S0040-6090(99)00825-1 ↗