Comprehensive simulation model for Cu(In,Ga)(Se,S)2 solar cells
Source abstract
Abstract
Abstract The modeling of Cu(In,Ga)(Se,S) 2 thin film solar cells enables us to understand device behavior while a reliable simulation with forecasting purpose needs to cover manifold measurement responses. We built up a simulation model to reproduce thermal admittance spectra, capacitance–voltage profiles, quantum efficiency and current–voltage ( I–V ) measurements in a broad temperature range from 130 K to 330 K with one parameter set. The comprehensive optical and electrical simulation model has been created as baseline for an indium sulfide buffered Cu(In,Ga)(Se,S) 2 solar cell based on measurement outcome and material characterization. The model ascribes the observed N1 feature ascribing it to a valence band barrier between Cu(In,Ga)(Se,S) 2 and Mo(Se,S) 2 back contact which is also responsible for the roll-over behavior in I–V measurements. A highly doped p + layer near the heterointerface is accountable for superposition failure of dark and light I–V curves and kink shape at low temperatures. Two-dimensional simulations further show roll-over dependence on back contact inhomogeneities due to sulfur fluctuations.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Solar cell efficiency tables (version 42)10.1002/pip.2404 ↗
2. M. Burgelman, J. Verschraegen, B. Minnaert, J. Marlein, Numerical simulation of thin film solar cells: practical exercises with SCAPS, in: Proceedings of NUMOS, 2007, pp. 357–366.
3. Defects in Cu(In,Ga)Se2 semiconductors and their role in the device performance of thin-film solar cells10.1002/(SICI)1099-159X(199703/04)5:2<121::AID-PIP159>3.0.CO;2-4 ↗
4. Light induced changes in the electrical behavior of CdTe and Cu(In,Ga)Se2 solar cells10.1016/S0040-6090(01)01507-3 ↗
5. M. Burgelmann, J. Marlein, Analysis of graded band gap solar cells with SCAPS, in: Proccedings of the 23rd European Photovoltaic Solar Energy Conference, 2008, pp. 2151–2155.
6. A. Niemegeers, M. Burgelman, Numerical modelling of ac-characteristics of CdTe and CIS solar cells, in: Proceedings of the 25nd IEEE Photovoltaic Specialists Conference, 1996, pp. 901–904.10.1109/PVSC.1996.564274 ↗
7. Optical and electrical modeling of Cu(In,Ga)Se2 solar cells10.1007/s11082-006-9049-1 ↗
8. Band-gap grading in Cu(In,Ga)Se2 solar cells10.1016/j.jpcs.2005.09.087 ↗
9. Baseline model of graded-absorber Cu(In,Ga)Se2 solar cells applied to cells with Zn1−xMgxO buffer layers10.1016/j.tsf.2010.12.141 ↗
10. M. Lee, D. Pramanik, H. Liang, E. Korczynski, J. van Duren, Optimization of graded CIGS solar cells using TCAD simulations, in: Proceedings of the Materials Research Society Symposium, vol. 1447, 2012.10.1557/opl.2012.1167 ↗
11. Model for electronic transport in Cu(In,Ga)Se2 solar cells10.1002/(SICI)1099-159X(199811/12)6:6<407::AID-PIP230>3.0.CO;2-U ↗
12. Bulk and metastable defects in CuIn(1−x)Ga(x)Se2 thin films using drive-level capacitance profiling10.1063/1.1633982 ↗
13. Interpretation of admittance, capacitance–voltage, and current–voltage signatures in Cu(In,Ga)Se2 thin film solar cells10.1063/1.3277043 ↗
14. Characterization of metastabilities in Cu(In,Ga)Se2 thin-film solar cells by capacitance and current–voltage spectroscopy10.1063/1.3656453 ↗
15. Defect distributions in thin film solar cells deduced from admittance measurements under different bias voltages10.1063/1.3641987 ↗
16. Numerical modeling of intra-band tunneling for heterojunction solar cells in scaps10.1016/j.tsf.2006.12.049 ↗
17. M. Gloeckler, W.K. Metzger, J.R. Sites, Simulation of polycrystalline Cu(In,Ga)Se2 solar cells in two dimensions, in: Proceedings of the Materials Research Society Symposium,vol. 865, 2011. F14.1.10.1557/PROC-865-F14.1 ↗
18. A simulation study of the effect of the diverse valence-band offset and the electronic activity at the grain boundaries on the performance of polycrystalline Cu(In,Ga)Se2 solar cells10.1016/j.tsf.2010.12.100 ↗
19. Modelling multivalent defects in thin film solar cells10.1016/j.tsf.2010.12.039 ↗
20. Modeling metastabilities in chalcopyrite-based thin film solar cells10.1063/1.3686651 ↗
21. CIS module pilot processing applying concurrent rapid selenization and sulfurization of large area thin film precursors10.1016/S0040-6090(03)00249-9 ↗
22. High efficiency CIGS solar modules10.1016/j.egypro.2012.02.032 ↗
23. Grain boundary investigations on sulfurized Cu(In,Ga)(S,Se)2 solar cells using atom probe tomography10.1016/j.solmat.2013.07.034 ↗
24. C. Schubbert, P. Eraerds, M. Richter, J. Parisi, I. Riedel, T. Dalibor, et al., Simulation of different interface configurations of CIGSSe solar cells, in: Proceedings of the 27th European Photovoltaic Solar Energy Conference and Exhibition, 2012, pp. 2300–2304.
25. One-dimensional simulation of sequentially processed heterojunction solar cells with vertically graded absorber composition10.1016/j.physb.2013.11.010 ↗
26. Optical characterization and modeling of Cu(In,Ga)(Se,S)2 solar cells with spectroscopic ellipsometry and coherent numerical simulation10.1016/j.tsf.2012.11.078 ↗
27. Blood · 1990
28. Admittance spectroscopy of cadmium free CIGS solar cells heterointerfaces10.1016/j.tsf.2005.11.087 ↗
29. Distinction between bulk and interface states in CuInSe2/CdS/ZnO by space charge spectroscopy10.1063/1.366686 ↗
30. Intrinsic point defects in CuInSe2 and CuGaSe2 as seen via screened–exchange hybrid density functional theory10.1103/PhysRevB.87.245203 ↗
31. Effect of Ga content on defect states in CuIn1−xGaxSe2 photovoltaic devices10.1063/1.1485301 ↗
32. Influence of deep traps on the measurement of free-carrier distributions in semiconductors by junction capacitance techniques10.1063/1.1663500 ↗
33. Charge and doping distributions by capacitance profiling in Cu(In,Ga)Se2 solar cells10.1063/1.2884708 ↗
34. A simulation study on the temperature behaviour of Cu(In,Ga)(Se,S)2 solar cells: impact of band gap profile variations and secondary barriers
35. Oxygenation and air-annealing effects on the electronic properties of Cu(In,Ga)Se2 films and devices10.1063/1.370758 ↗
36. Reinterpretation of defect levels derived from capacitance spectroscopy of CIGSe solar cells10.1016/j.tsf.2008.10.092 ↗
37. Hopping conduction observed in thermal admittance spectroscopy10.1103/PhysRevLett.104.226403 ↗
38. Assignment of capacitance spectroscopy signals of CIGS solar cells to effects of non-ohmic contacts10.1016/j.solmat.2013.01.014 ↗
39. Work function of adsorption systems potassium on tantalum and on molybdenum10.1016/0039-6028(76)90032-7 ↗
40. Work function engineering of molybdenum gate electrodes by nitrogen implantation10.1149/1.1402497 ↗
41. Photoelectric work function of a molybdenum single crystal for the (100), (110), (111), (112), (114), and (332) faces10.1016/0039-6028(74)90231-3 ↗
42. Electronic level alignment at the deeply buried absorber/Mo interface in chalcopyrite-based thin film solar cells10.1063/1.2955532 ↗
43. A study on molybdenum sulphoselenide (MoSxSe2−x, 0≤x≤2) thin films: growth from solution and its properties10.1016/j.electacta.2012.07.077 ↗
44. Defect spectroscopy of Cu(In,Ga)Se2-based thin film solar cells on polyimide substrate10.1016/j.tsf.2013.02.032 ↗
45. Capacitance profiling in the CIGS solar cells10.1016/j.tsf.2006.12.102 ↗
46. Electrical properties of CIGS/Mo junctions as a function of MoSe2 orientation and Na doping
47. Impact of Na on MoSe2 formation at the CIGSe/Mo interface in thin-film solar cells on polyimide foil at low process temperatures10.1016/j.actamat.2013.09.051 ↗
48. M. Igalson, A. Urbaniak, K. Macielak, M. Tomassini, N. Barreau, S. Spiering, Barriers for current transport in CIGS structures, in: Proceedings of the 37th IEEE Photovoltaic Specialists Conference, 2011, pp. 002727–002731.10.1109/PVSC.2011.6186511 ↗
49. Investigation of the diffusion behavior of sodium in Cu(In,Ga)Se2 layers10.1063/1.4871457 ↗
50. Anion vacancies as a source of persistent photoconductivity in II–VI and chalcopyrite semiconductors10.1103/PhysRevB.72.035215 ↗
51. Metastabilities in the electrical characteristics of CIGS devices: experimental results vs theoretical predictions10.1016/j.tsf.2006.12.038 ↗
52. Vacancy defects in epitaxial thin film CuGaSe2 and CuInSe210.1103/PhysRevB.86.064102 ↗
53. Potential of light trapping in microcrystalline silicon solar cells with textured substrates10.1002/pip.506 ↗
54. Blue-photon modification of nonstandard diode barrier in CuInSe2 solar cells10.1016/S0927-0248(98)00035-X ↗
55. Electronic properties of Cu(In,Ga)Se2 heterojunction solar cells-recent achievements, current understanding, and future challenges10.1007/s003390050984 ↗
56. Scheer · 2011
57. The electronic structure of chalcopyrites-bands, point defects and grain boundaries10.1002/pip.936 ↗
58. Red-blue effect in Cu(In,Ga)Se2-based devices revisited10.1016/j.tsf.2012.11.040 ↗
59. Understanding defect-related issues limiting efficiency of CIGS solar cells10.1016/j.solmat.2009.01.022 ↗
60. Tunneling-enhanced recombination in Cu(In,Ga)Se2 heterojunction solar cells10.1063/1.122967 ↗
61. Influence of post-deposition heat treatment on electrical transport properties of In2S3-buffered Cu(In,Ga)Se2 cells10.1016/j.tsf.2012.11.076 ↗