Stresses in vacuum glazing fabricated at low temperature
Source abstract
Abstract
This paper reports an experimental and theoretical study of the stresses in and durability of vacuum glazing fabricated at low temperature using an indium based edge seal. For the first time a finite-element model with support pillars incorporated directly, enabled the stresses in the whole structure to be explicitly calculated. Experimental validations of the finite element model predictions were undertaken. Modelling results are presented for a case with American Society of Testing and Materials standard winter boundary conditions. It was found that, for the particular system studied, the predicted stress level in the structure is essentially the same for indium sealed and solder glass sealed vacuum glazing, and the magnitude of stress values in the indium seal is comparable with that dictated by the indium strength characteristics.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Analysis of Composite Materials · Building Energy and Comfort Optimization · Architecture and Computational Design
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. American Society of Testing and Materials, Standard procedures for determining the steady state thermal transmittance of fenestration systems, ASTM Standard E 1423-91, in: Annual Book of ASTM Standard 04.07, 1994, pp. 1160–1165.
2. Simko · Sol. Energy · 1998 · 63 · 110.1016/S0038-092X(98)00052-8 ↗
3. Collins · Sol. Energy · 1992 · 49 · 33310.1016/0038-092X(92)90106-K ↗
4. Collins · Sol. Energy · 1991 · 47 · 2710.1016/0038-092X(91)90060-A ↗
5. Fischer-Cripps · Build. Environ. · 1995 · 30 · 4110.1016/0360-1323(94)E0032-M ↗
6. T. M. Simko, Heat transfer processes and stresses in vacuum glazing, Ph.D. Thesis, The University of Sydney, 1996.
7. Collins · Sol. Energy · 1998 · 62 · 18910.1016/S0038-092X(98)00007-3 ↗
8. Misonou · J. Vac. Soc. Japan · 1998 · 41 · 44810.3131/jvsj.41.448 ↗
9. Griffiths · Build. Res. Inf. · 1996 · 24 · 14110.1080/09613219608727517 ↗
10. Griffiths · Sol. Energy · 1998 · 63 · 24310.1016/S0038-092X(98)00019-X ↗
11. T.K. Hyde, P.W. Griffiths, P.C. Eames, B. Norton, Development of a novel low temperature edge seal for glazing applications, in: Proceedings of the World Renewable Energy Congress VI, Brighton, UK, 2000, pp. 271–274.10.1016/B978-008043865-8/50050-7 ↗
12. J.F. Zhao, Y. Fang, T. Hyde, J. Wang , P.C. Eames, Fabrication of low temperature sealed vacuum glazing using a modified pump-out technique, in: Proceedings of CISBAT 2005, Lausanne, Switzerland, 2005, pp. 201–206.
13. Fang · Sol. Energy · 2005 · 79 · 24510.1016/j.solener.2004.11.009 ↗
14. Fang · Sol. Energy · 2006 · 80 · 56410.1016/j.solener.2005.04.002 ↗
15. Fischer-Cripps · Build. Environ. · 1995 · 30 · 2910.1016/0360-1323(94)E0026-N ↗
16. Collins · Build. Environ. · 1995 · 30 · 45910.1016/0360-1323(95)00025-2 ↗
17. Rao · 1999
18. Holman · 1989
19. Anon, Pilkington K glass information sheet, Pilkington Glass limited, England, 1989.
20. Wilson · Sol. Energy · 1998 · 63 · 39310.1016/S0038-092X(98)00079-6 ↗
21. Zhang · Int. J. Heat Mass Transfer · 1997 · 40 · 6110.1016/S0017-9310(96)00071-3 ↗
22. ISO, Thermal insulation—determination of steady-state thermal transmission properties—calibrated and guarded hot box, ISO 8990, Geneva, Switzerland, 1994.
23. Anon, EA-05-125AC-350, Strain gauge, Micro-Measurements Division of Raleigh, North Carolina, USA.
24. Anon, DL2e, Data logger, Delta-T Devices Ltd., UK.
25. Moore · Br. J. Appl. Phys. · 1952 · 3 · 29910.1088/0508-3443/3/9/308 ↗
26. Reed · Mater. Sci. Eng. A. · 1988 · 102 · 22710.1016/0025-5416(88)90578-2 ↗