Improved performance of ZnO nanostructured bulk heterojunction organic solar cells with nanowire-density modified by yttrium chloride introduction into solution
Source abstract
Abstract
Abstract Yttrium doped zinc oxide (ZnO) nanowires prepared on seedless indium tin oxide (ITO) substrates were used for nanostructured bulk heterojunction organic solar cells (OSCs). Without patterning by a mask, the optimized areal density of ZnO nanowires decreased the reflection of incident light impinging upon the substrate by more than 50%, resulting in better incident-photon to current efficiencies (IPCEs) than for solar cells without ZnO nanostructures. OSC decorated with yttrium doped ZnO nanostructures showed an increase in current density from 8.9 mA/cm2 to 9.9 mA/cm2 resulting in 15% better device performance than a planar bulk heterojunction OSC. It was found that the antireflective effect due to ZnO nanowires was maximized with an areal density of 50 nanowires per 100 μm2. The areal density was optimized by incorporation of 0.02 mM yttrium chloride into the growth solution during nanostructure formation. In addition, OSC that incorporated the optimized areal density and length of ZnO nanostructures showed a 25% improved power conversion efficiency of 2.5% compared to OSC prepared on an ITO substrate without the ZnO nanostructures. Our results indicate that growth of density-controlled ZnO nanowire arrays on seedless ITO substrates using yttrium dopant is simple, low cost, and easily controllable method that enables low temperature fabrication, without patterning, of antireflective structures for significantly enhanced efficiency bulk heterojunction OSCs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Perovskite Materials and Applications · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films10.1038/353737a0 ↗
2. Photoinduced electron transfer from a conducting polymer to buckminsterfullerene10.1126/science.258.5087.1474 ↗
3. Plastic solar cells10.1002/1616-3028(200102)11:1<15::AID-ADFM15>3.0.CO;2-A ↗
4. A brief history of the development of organic and polymeric photovoltaics10.1016/j.solmat.2004.02.021 ↗
5. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
6. High efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
7. Coupled optical and electronic modeling of dye-sensitized solar cells for steady-state parameter extraction10.1021/jp111565q ↗
8. Conversion of light to electricity by cis-X2bis(2,2′-bipyridyl-4,4′-dicarboxylate)ruthenium(II) charge-transfer sensitizers on nanocrystalline TiO2 electrodes10.1021/ja00067a063 ↗
9. Recent progress in polymer solar cells: manipulation of polymer: fullerene morphology and the formation of efficient inverted polymer solar cells10.1002/adma.200802854 ↗
10. Polymer–fullerene bulk-heterojunction solar cells10.1002/adma.200801283 ↗
11. Recombination dynamics as a key determinant of open circuit voltage in organic bulk heterojunction solar cells: a comparison of four different donor polymers10.1002/adma.201002360 ↗
12. Bulk geterojunction solar cells with internal quantum efficiency approaching 100%10.1038/nphoton.2009.69 ↗
13. All solution roll-to-roll processed polymer solar cells free from indium-tin-oxide and vacuum coating steps10.1016/j.orgel.2009.03.009 ↗
14. Fabrication, optical modeling, and color characterization of semitransparent bulk-heterojunction organic solar cells in an inverted structure10.1002/adfm.201000176 ↗
15. Chang · Nano Letters · 2010 · 10 · 260910.1021/nl101322h ↗
16. Photocurrent generation in nanostructured organic solar cells10.1021/nn700447t ↗
17. Nanostructured organic and hybrid solar cells10.1002/adma.201003991 ↗
18. Analysis of optical absorption in silicon nanowire arrays for photovoltaic applications10.1021/nl071018b ↗
19. Vertically-aligned nanostructures of ZnO for excitonic solar cells10.1039/B811536B ↗
20. Performance improvement of organic solar cells with moth eye anti-reflection coating10.1016/j.tsf.2007.12.088 ↗
21. ZnO nanostructures as efficient antireflection layers in solar cells10.1021/nl080659j ↗
22. An inverted organic solar cell employing a sol–gel derived ZnO electron selective layer and thermal evaporated MoO3 hole selective layer10.1063/1.3039076 ↗
23. Inverted bulk-heterojunction organic photovoltaic device using a solution-derived ZnO underlayer10.1063/1.2359579 ↗
24. Face-selective electrostatic control of hydrothermal zinc oxide nanowire synthesis10.1038/nmat3069 ↗
25. Vapour-transport-deposition growth of ZnO nanostructures10.1088/0957-4484/17/11/S02 ↗
26. ZnO nanostructure construction on zinc foil10.1039/b911508k ↗
27. Takanezawa · Journal of Physical Chemistry C · 2007 · 111 · 721810.1021/jp071418n ↗
28. Electrons in nanostructured TiO2 solar cells: transport, recombination and photovoltaic properties10.1016/j.ccr.2004.03.015 ↗
29. Device physics of polymer:fullerene bulk heterojunction solar cells10.1002/adma.200601093 ↗