journal article·2022-09

Polypyrrole-coated conjugated microporous polymers/expanded graphene carbon aerogels based phase change materials composites for efficient energy conversion and storage

Xingyun Ye, Lijuan Yang, Zhuoyue Tian, Peilei Zhou, Shuo Wang, Hanxue Sun, Zhaoqi Zhu, Jiyan Li, Weidong Liang, An Li

Publisher page

Abstract

Phase change materials (PCMs) composites are of great importance for a wide range of applications in energy conversion and storage, waste heat recovery and utilization, thermal energy management in building, electronic devices cooling and heat insulation, etc. Herein, a novel strategy for the fabrication of PCM composites for solar/electro energy conversion and storage is reported. The polypyrrole (PPy) coated conjugated microporous polymers/expanded graphene (EG) carbon aerogels/HDA (PCMPECAs/HDA) composites were firstly obtained via Sonogashira–Hagihara cross-coupling reaction followed by a carbonization treatment, PPy coating and finally 1-Hexadecylamine (HDA) impregnation. The introduction of EG and PPy was to improve the porosity, thermal conductivity and photothermal performance. The resultant PCMPECAs/HDA composites exhibited excellent comprehensive performances, including relatively high thermal conductivity of up to 234.0% that of HDA, high energy storage density up to 205.10 kJ/kg, excellent shape and thermal stability and a remarkable photothermal conversion and storage efficiency of up to 93.5%, respectively. And after 300 times thermal and cooling cycles, the latent heat of PCMPECAs/HDA still remains up to 150.20 kJ/kg. Besides, the resultant composites also manifest excellent electro-thermal effect at low voltage. Due to the aforementioned advantages, PCMPECAs/HDA composites possess great potential applications in solar/electric energy conversion and storage.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solar-Powered Water Purification Methods · Phase Change Materials Research · Solar Thermal and Photovoltaic Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (68)

Show source-provided references
1. Potential assessment of photovoltaic power generation in China10.1016/j.rser.2021.111900 ↗
2. Next-generation solar cells and conversion of solar energy10.1021/acsenergylett.6b00645 ↗
3. Robustly inorganic solar steam generator derived from hollow glass microspheres based composites for desalination10.1002/solr.202100771 ↗
4. Reduced graphene oxide coated hollow polyester fibers for efficient solar steam generation10.1002/ente.201900265 ↗
5. Potentially scalable fabrication of salt-rejection evaporator based on electrogenerated polypyrrole-coated nickel foam for efficient solar steam generation10.1016/j.desal.2021.114982 ↗
6. High‐entropy‐alloy nanoparticles with enhanced interband transitions for efficient photothermal conversion10.1002/ange.202112520 ↗
7. Recent progress on the solar‐driven interfacial evaporation based on natural products and synthetic polymers10.1002/solr.202100475 ↗
8. A novel three-dimensional network-based stearic acid/graphitized carbon foam composite as high-performance shape-stabilized phase change material for thermal energy storage10.1016/j.compositesb.2021.109318 ↗
9. Carbon aerogel based composite phase change material derived from kapok fiber: exceptional microwave absorbility and efficient solar/magnetic to thermal energy storage performance10.1016/j.compositesb.2021.109330 ↗
10. Form-stable phase change material based on Na2CO3· 10H2O-Na2HPO4· 12H2O eutectic hydrated salt/expanded graphite oxide composite: the influence of chemical structures of expanded graphite oxide10.1016/j.renene.2017.08.097 ↗
11. Macro-encapsulated 3D phase change material: Na2S2O3· 5H2O-NaOAc· 3H2O/carbonized Melamine sponge composite as core and SiC modified polyurethane thin-layer as shell10.1016/j.compscitech.2021.108981 ↗
12. Carboxylated nanocellulose/poly (ethylene oxide) composite films as solid–solid phase-change materials for thermal energy storage10.1016/j.carbpol.2019.115215 ↗
13. Enhanced thermal performance of phase-change materials supported by mesoporous silica modified with polydopamine/nano-metal particles for thermal energy storage10.1016/j.renene.2021.06.021 ↗
14. Highly graphitized 3D network carbon for shape-stabilized composite PCMs with superior thermal energy harvesting10.1016/j.nanoen.2018.03.075 ↗
15. Unsaturated polyester resin supported form-stable phase change materials with enhanced thermal conductivity for solar energy storage and conversion10.1016/j.renene.2021.04.033 ↗
16. Dodecylamine/Ti3C2-pectin form-stable phase change composites with enhanced light-to-thermal conversion and mechanical properties10.1016/j.renene.2021.05.136 ↗
17. Fatty amines/graphene sponge form-stable phase change material composites with exceptionally high loading rates and energy density for thermal energy storage10.1016/j.cej.2019.122831 ↗
18. 1-Octadecanol@ hierarchical porous polymer composite as a novel shape-stability phase change material for latent heat thermal energy storage10.1016/j.apenergy.2016.11.043 ↗
19. Ultra-light graphene tile-based phase-change material for efficient thermal and solar energy harvest10.1021/acsaem.0c00490 ↗
20. Nanoporous boron nitride aerogel film and its smart composite with phase change materials10.1021/acsnano.0c05931 ↗
21. Electro-and photodriven phase change composites based on wax-infiltrated carbon nanotube sponges10.1021/nn304310n ↗
22. Novel flexible phase change materials with mussel-inspired modification of melamine foam for simultaneous light-actuated shape memory and light-to-thermal energy storage capability10.1021/acssuschemeng.9b03169 ↗
23. Azobenzene-based solar thermal fuels: design, properties, and applications10.1039/C8CS00470F ↗
24. Toward controlled thermal energy storage and release in organic phase change materials10.1016/j.joule.2020.07.011 ↗
25. Light-switchable polymer adhesive based on photoinduced reversible solid-to-liquid transitions10.1021/acsmacrolett.9b00459 ↗
26. Flexible solar thermal fuel devices: composites of fabric and a photoliquefiable azobenzene derivative
27. Copper sulfide nanodisk-doped solid–solid phase change materials for full spectrum solar-thermal energy harvesting and storage10.1021/acsami.0c16891 ↗
28. Ti3C2T x@ PDA-integrated polyurethane phase change composites with superior solar-thermal conversion efficiency and improved thermal conductivity10.1021/acssuschemeng.0c01582 ↗
29. Dynamic tuning of magnetic phase change composites for solar-thermal conversion and energy storage10.1016/j.apenergy.2020.114570 ↗
30. Melamine foam-templated graphene nanoplatelet framework toward phase change materials with multiple energy conversion abilities10.1016/j.cej.2019.02.023 ↗
31. A functional form-stable phase change composite with high efficiency electro-to-thermal energy conversion10.1016/j.apenergy.2016.12.159 ↗
32. Form-stable phase change composites: preparation, performance, and applications for thermal energy conversion, storage and management10.1016/j.ensm.2021.07.019 ↗
33. Plasmonic Ti3C2T x MXene enables highly efficient photothermal conversion for healable and transparent wearable device10.1021/acsnano.9b03161 ↗
34. Multifunctional thermosensitive liposomes based on natural phase-change material: near-infrared light-triggered drug release and multimodal imaging-guided cancer combination therapy10.1021/acsami.8b22748 ↗
35. Co-designing electronics with microfluidics for more sustainable cooling10.1038/s41586-020-2666-1 ↗
36. Bilayer porous polymer for efficient passive building cooling10.1016/j.nanoen.2021.105971 ↗
37. Dynamic thermal management for industrial waste heat recovery based on phase change material thermal storage10.1016/j.apenergy.2018.12.040 ↗
38. Tailoring carbon nanotube density for modulating electro-to-heat conversion in phase change composites10.1021/nl401097d ↗
39. Comparative study of carbon nanoparticles and single-walled carbon nanotube for light-heat conversion and thermal conductivity enhancement of the multifunctional PEG/diatomite composite phase change material10.1021/acsami.9b04349 ↗
40. Highly efficient thermo-and sunlight-driven energy storage for thermo-electric energy harvesting using sustainable nanocellulose-derived carbon aerogels embedded phase change materials10.1021/acssuschemeng.9b05015 ↗
41. High energy storage density and efficiency in aligned nanofiber filled nanocomposites with multilayer structure10.1016/j.compositesb.2020.108206 ↗
42. Enhanced light-thermal conversion efficiency of mixed clay base phase change composites for thermal energy storage10.1016/j.clay.2020.105535 ↗
43. Effect of expanded graphite size on performances of modified CaCl2· 6H2O phase change material for cold energy storage10.1016/j.micromeso.2020.110403 ↗
44. Ca (NO3) 2-NaNO3/expanded graphite composite as a novel shape-stable phase change material for mid-to high-temperature thermal energy storage10.1016/j.enconman.2018.02.057 ↗
45. Enhanced thermal-to-flexible phase change materials based on cellulose/modified graphene composites for thermal management of solar energy10.1021/acsami.9b18543 ↗
46. High‐performance thermally conductive phase change composites by large‐size oriented graphite sheets for scalable thermal energy harvesting10.1002/adma.201905099 ↗
47. Highly conductive phase change composites enabled by vertically-aligned reticulated graphite nanoplatelets for high-temperature solar photo/electro-thermal energy conversion, harvesting and storage10.1016/j.nanoen.2021.106338 ↗
48. Dual‐Encapsulated highly conductive and liquid‐free phase change composites enabled by polyurethane/graphite nanoplatelets hybrid networks for efficient energy storage and thermal management
49. Biomass carbon aerogels based shape-stable phase change composites with high light-to-thermal efficiency for energy storage10.1016/j.renene.2020.02.008 ↗
50. Superwetting monolithic hollow‐carbon‐nanotubes aerogels with hierarchically nanoporous structure for efficient solar steam generation10.1002/aenm.201802158 ↗
51. Fungi‐enabled synthesis of ultrahigh‐surface‐area porous carbon
52. Carbon‐based composite phase change materials for thermal energy storage, transfer, and conversion
53. Flexible and foldable composite films based on polyimide/phosphorene hybrid aerogel and phase change material for infrared stealth and thermal camouflage10.1016/j.compscitech.2021.109127 ↗
54. Polyimide/phosphorene hybrid aerogel-based composite phase change materials for high-efficient solar energy capture and photothermal conversion
55. Polyimide/MXene hybrid aerogel-based phase-change composites for solar-driven seawater desalination10.1016/j.cej.2022.135862 ↗
56. Efficient capture of PM 2.5 by intertwined tubular conjugated microporous polymer-based filters with high stability in a humid environment10.1039/D0TA11908C ↗
57. Fatty amines embedded carbon membranes with aligned nanochannels network: a device with extremely high photothermal conversion efficiency towards solar energy harvesting and storage10.1002/solr.202100924 ↗
58. 3D structure fungi-derived carbon stabilized stearic acid as a composite phase change material for thermal energy storage10.1016/j.renene.2019.03.121 ↗
59. High‐performance electrocatalysts for oxygen reduction derived from cobalt porphyrin‐based conjugated mesoporous polymers10.1002/adma.201304147 ↗
60. Nitrogen-doped porous carbon/graphene nanosheets derived from two-dimensional conjugated microporous polymer sandwiches with promising capacitive performance10.1039/C6QM00012F ↗
61. Innovative nanoporous carbons with ultrahigh uptakes for capture and reversible storage of CO2 and volatile iodine10.1016/j.jhazmat.2016.09.015 ↗
62. Fabrication of bilayered attapulgite for solar steam generation with high conversion efficiency10.1016/j.cej.2018.12.157 ↗
63. Investigation on thermal properties of capric–palmitic–stearic acid/activated carbon composite phase change materials for high-temperature cooling application10.1007/s10973-015-5173-0 ↗
64. Thermal reliability of typical fatty acids as phase change materials based on 10,000 accelerated thermal cycles10.1016/j.scs.2018.12.008 ↗
65. The reinforced photothermal effect of conjugated dye/graphene oxide-based phase change materials: fluorescence resonance energy transfer and applications in solar-thermal energy storage
66. From anisotropic graphene aerogels to electron-and photo-driven phase change composites10.1039/C6TA07587H ↗
67. Enhanced light-to-thermal conversion performance of all-carbon aerogels based form-stable phase change material composites10.1016/j.jcis.2021.07.066 ↗
68. Novel composite phase change materials based on hollow carbon nanospheres supporting fatty amines with high light-to-thermal transition efficiency10.1016/j.solmat.2021.111035 ↗