SiO2-ternary carbonate nanofluids prepared by mechanical mixing at high temperature: Enhanced specific heat capacity and thermal conductivity
Source abstract
Abstract
Abstract Ternary carbonate (K2CO3–Li2CO3–Na2CO3, 4:4:2 mass ratio) can be used as a high-temperature heat transfer and thermal storage medium in concentrated solar power systems. Ternary carbonate nanofluids with 1.0 wt% SiO2 nanoparticles were prepared by mechanical mixing at high temperatures in order to enhance the specific heat capacity and the thermal conductivity. The effects of stirring rate (500 rpm, 750 rpm, and 1000 rpm) and stirring time (15 min, 30 min, and 60 min) on the thermal properties of the as-prepared nanofluids were analyzed. The results showed that the dispersion homogeneity of the nanoparticles in the nanofluids varied with the stirring rate and the mixing time, thereby affecting the formation of special nanostructures. The maximum enhancements in specific heat capacity and thermal conductivity at a temperature of 540 °C, stirring rate of 750 rpm and stirring time of 30 min were 38.5% and 50%, respectively. The specific heat capacity of the optimal nanofluids had no significant deterioration after the thermostatic (at 600 °C for 150 h) and thermal shock (50 cycles) experiments were conducted.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nanofluid Flow and Heat Transfer · Solar Thermal and Photovoltaic Systems · Phase Change Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Carbon emissions dynamics, efficiency gains, and technological innovation in China's industrial sectors10.1016/j.energy.2016.01.012 ↗
2. Review on concentrating solar power plants and new developments in high temperature thermal energy storage technologies10.1016/j.rser.2015.09.026 ↗
3. Critical phenomena and their effect on thermal energy storage in supercritical fluids10.1016/j.apenergy.2017.09.081 ↗
4. Two-tank molten salt storage for parabolic trough solar power plants10.1016/S0360-5442(03)00193-2 ↗
5. Advances in parabolic trough solar power technology10.1115/1.1467922 ↗
6. Enhanced specific heat capacity of high-temperature molten salt-based nanofluids10.1016/j.ijheatmasstransfer.2012.10.062 ↗
7. Experimental validation of enhanced heat capacity of ionic liquid-based nanomaterial10.1063/1.4801645 ↗
8. Effect of solvent on specific heat capacity enhancement of binary molten salt-based carbon nanotube nanomaterials for thermal energy storage10.1016/j.ijthermalsci.2015.07.020 ↗
9. Enhanced specific heat capacity of molten salt-based nanomaterials: effects of nanoparticle dispersion and solvent material10.1016/j.actamat.2014.05.005 ↗
10. Effects of silica nanoparticles on enhancing eutectic carbonate salt specific heat
11. Size effect of nanoparticle on specific heat in a ternary nitrate (LiNO3-NaNO3-KNO3) salt eutectic for thermal energy storage10.1016/j.applthermaleng.2016.03.134 ↗
12. The enhanced specific heat capacity of ternary carbonates nanofluids with different nanoparticles10.1016/j.solmat.2017.05.032 ↗
13. Optimal concentration of alumina nanoparticles in molten Hitec salt to maximize its specific heat capacity10.1016/j.ijheatmasstransfer.2013.10.078 ↗
14. Effect of nanoparticle dispersion on enhancing the specific heat capacity of quaternary nitrate for solar thermal energy storage application10.1016/j.solmat.2016.07.046 ↗
15. Effect of Al2O3 nanoparticle dispersion on the specific heat capacity of a eutectic binary nitrate salt for solar power applications10.1016/j.enconman.2017.03.062 ↗
16. Enhanced thermal properties of SiO2 nanocomposite for solar thermal energy storage applications10.1016/j.ijheatmasstransfer.2015.01.100 ↗
17. Thermal properties measurement of binary carbonate salt mixtures for concentrating solar power plants10.1063/1.4922029 ↗
18. Insights into the specific heat capacity enhancement of ternary carbonate nanofluids with SiO2 nanoparticles: the effect of change in the composition ratio10.1039/C8RA10318F ↗
19. Heat capacity of nanofluids for solar energy storage produced by dispersing oxide nanoparticles in nitrate salt mixture directly at high temperature10.1016/j.solmat.2017.04.011 ↗
20. Effect of SiO2 nanoparticles on specific heat capacity of low-melting-point eutectic quaternary nitrate salt10.1016/j.solmat.2018.01.014 ↗
21. Macroencapsulation of sodium chloride as phase change materials for thermal energy storage10.1016/j.solener.2018.02.045 ↗
22. On the specific heat capacity enhancement in nanofluids10.1186/s11671-015-1188-5 ↗
23. Enhancement of specific heat of ternary nitrate (LiNO3-NaNO3-KNO3) salt by doping with SiO2 nanoparticles for solar thermal energy storage10.1049/mnl.2014.0407 ↗
24. Measurement of thermophysical properties of molten salts: mixtures of alkaline carbonate salts10.1007/BF01133274 ↗
25. Performance enhancement of bromide salt by nano-particle dispersion for high-temperature heat pipes in concentrated solar power plants10.1016/j.apenergy.2019.01.026 ↗
26. Physical properties data compilations relevant to energy storage. Ⅱ. Molten salts: data on single and multi-component salt systems
27. Introduction of the surface complexation model into the theory of colloid stability
28. Specific heat mechanism of molten salt nanofluids10.1063/1.4868254 ↗
29. Enhanced thermophysical properties of NEILs as heat transfer fluids for solar thermal applications10.1016/j.applthermaleng.2016.08.004 ↗
30. Effect of nanoparticle dispersion on specific heat capacity of a binary nitrate salt eutectic for concentrated solar power applications10.1016/j.ijthermalsci.2013.02.003 ↗