Influence of MgCl2 content on corrosion behavior of GH1140 in molten NaCl-MgCl2 as thermal storage medium
Source abstract
Abstract
Abstract As a thermal energy storage medium (TESM) at moderate-high temperature of concentrating solar power (CSP), the molten NaCl-MgCl2 has sharp corrosive action on a metal container. The influence of MgCl2 content on a metal corrosion behavior is not clear. The corrosion behavior of a Fe based alloy (GH1140) in molten NaCl-MgCl2 (at 1123 K) with different content of MgCl2 (wt%:0.0,48.9,61.0,93.6) were studied by the submergence corrosion experience. Results show that: after corrosion for 5 h, there is a negative correlation between the weight loss of samples and the content of MgCl2. In the molten salt without MgCl2, the sample was corroded according to the mechanism of “dissolution as anode- oxidizing- peeling off of oxide film”. After adding a little MgCl2 in the molten salt, an unprotected MgO shell was formed on the sample surface. The samples weight decreased and obeyed a line law. The elements of Fe and Cr deplete in the corrosion layer. Corrosion mechanism is “dissolution as anode- oxidizing- reduction- chlorination”. When the content of MgCl2 is very high in the molten salt, partial pressure of Cl2 increases. The corrosion mechanism is similar to what in the molten salt with a little MgCl2, but the chlorination reaction is more severe.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Solar Thermal and Photovoltaic Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. Corrosion of alloys in a chloride molten salt (NaCl-LiCl) for solar thermal technologies10.1016/j.solmat.2016.05.052 ↗
2. Williams · 2006
3. High-temperature corrosion of Cr–Mo steel in molten LiNO3–NaNO3–KNO3 eutectic salt for thermal energy storage10.1016/j.solmat.2014.10.007 ↗
4. High-temperature phase change materials for thermal energy storage10.1016/j.rser.2009.11.011 ↗
5. Effects of alloy elements on corrosion resistance of Fe-based stainless steals in molten NaCl
6. High-temperature corrosion mechanisms for selected iron and nickel-based alloys exposed to sulfur and chlorine-containing environments10.5006/1409 ↗
7. The influence of ppb levels of chloride impurities on the stain-induced corrosion cracking and corrosion fatigue crack growth behavior of low-alloy steels under simulated boling water reactor conditions10.1016/j.corsci.2016.03.010 ↗
8. The hot corrosion of 310 stainless steel with pre-coated NaCl/Na2SO4 mixtures at 750°C10.1016/j.matchemphys.2004.10.002 ↗
9. Hot corrosion behavior of a Cr-modified aluminide coating on a Ni based superalloy10.1007/s40195-014-0108-5 ↗
10. Hot corrosion behaviour of a cobalt-base super-alloy K40S with and without NiCrAlYSi coating10.1016/j.corsci.2011.02.022 ↗
11. High temperature interaction of Al/Si-modified Fe–Cr alloys with KCl10.1016/j.corsci.2006.10.019 ↗
12. Role of chlorides in hot corrosion of a cast Fe–Cr–Ni alloy. Part II: thermoschemical model studies10.1016/j.corsci.2004.04.014 ↗
13. Plasma-sprayed yttria-stabilized zirconia coatings on type 316L stainless steel for pyrochemical reprocessing plant10.1016/j.jnucmat.2007.03.175 ↗
14. The corrosion behavior of nickel in molten NaNO3-KNO3 eutectic10.1016/0376-4583(85)90116-5 ↗
15. Corrosion behaviors of thermal diffusion coating on the surface of Inconel625 alloy in chloride molten salts10.4028/www.scientific.net/MSF.809-810.589 ↗
16. Compile Group of Superalloys Metallographic Graph, Superalloys Metallographic Graph, first ed., Metallurgy Industry, Beijing, 1979.
17. Electrochemical performance of Ni20Cr coatings applied by combustion powder spray in ZnCl2-KCl molten salts10.1016/S1452-3981(23)13401-8 ↗