journal article·2017-11

Improved performance for polymer solar cells using CTAB-modified MoO3 as an anode buffer layer

Yanping Li, Huangzhong Yu, Xinxin Huang, Zuping Wu, Haihong Xu

Publisher page

Abstract

Abstract We report a method to prepare molybdenum oxide thin films using the stable cetrimonium bromide-modified MoO3 (CTAB-modified MoO3) precursor solution. The effect of thermal treatment on the optical, crystalline, morphologic properties and surface wettability is greatly obvious because of the pyrolytic decomposition of CTAB. The highly efficient and stable polymer solar cells (PSCs) have been also fabricated by adopting CTAB-modified MoO3 nanocomposite films as the novel and universal anode buffer layers (ABLs). The P3HT:ICBA based solar cells with CTAB-modified MoO3 at 200 °C heat treatment exhibit an best power conversion efficiency (PCE) of 5.80% with long-term stability, and the PTB7:PC71BM based solar cells with CTAB-modified MoO3 at 200 °C heat treatment show an best PCE of 8.34% with long-term stability, which are higher than that of the corresponding devices with PEDOT:PSS films. The improvement in device performance is mainly due to the agreeable electrical properties and enhanced charge extraction of the CTAB-modified MoO3 ABLs, and CTAB modification to the MoO3 surface can effectively passivate its surface traps, suppress the recombination loss of carriers. The surface of CTAB-modified MoO3 films is also more hydrophobic than that of the PEDOT:PSS. In a word, these indicate the CTAB-modified MoO3 films may be used as a novel and generally applicable hole transport layer for high-efficiency and ambient stable polymer solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Organic Light-Emitting Diodes Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (70)

Show source-provided references
1. Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor-acceptor heterojunctions10.1126/science.270.5243.1789 ↗
2. Hybrid nanorod-polymer solar cells10.1126/science.1069156 ↗
3. Conjugated polymer-based organic solar cells10.1021/cr050149z ↗
4. Role of stress factors on the adhesion of interfaces in R2R fabricated organic photovoltaics10.1002/aenm.201501927 ↗
5. A series of simple oligomer-like small molecules based on oligothiophenes for solution-processed solar cells with high efficiency10.1021/jacs.5b00305 ↗
6. Conjugated polymers consisting of quinacridone and quinoxaline as donor materials for organic photovoltaics: orientation and charge transfer properties of polymers formed by phenyl structures with a quinoxaline derivative10.1039/c3ta10512a ↗
7. Correlation of intramolecular charge transfer and orientation properties among quinacridone and acceptor units10.1016/j.solmat.2013.12.004 ↗
8. Replacing alkoxy groups with alkylthienyl groups: a feasible approach to improve the properties of photovoltaic polymers10.1002/ange.201103313 ↗
9. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
10. Efficient inverted polymer solar cells based on surface modified FTO transparent electrodes10.1016/j.solmat.2015.01.001 ↗
11. Performance and lifetime improvement of polymer/fullerene blend photovoltaic cells with a C-60 interlayer10.1016/j.orgel.2008.07.010 ↗
12. Perylene bisimide as a promising zinc oxide surface modifier: enhanced interfacial combination for highly efficient inverted polymer solar cells10.1021/acsami.5b07759 ↗
13. Metal oxides for interface engineering in polymer solar cells10.1039/c2jm33838f ↗
14. Electrode considerations for the optical enhancement of organic bulk heterojunction solar cells10.1002/aenm.201100250 ↗
15. Recent advances in solution-processed interfacial materials for efficient and stable polymer solar cells10.1039/c2ee02806a ↗
16. Ultrathin ammonium heptamolybdate films as efficient room-temperature hole transport layers for organic solar cells10.1021/am504606u ↗
17. Influence of cathode oxidation via the hole extraction layer in polymer:fullerene solar cells10.1016/j.orgel.2011.01.025 ↗
18. Degradation of a Thin Ag Layer Induced by Poly(3,4ethylenedioxythiophene):polystyrene sulfonate in a transmission electron microscopy specimen of an inverted polymer solar cell10.1021/am301818z ↗
19. Solution processed MoO3 interfacial layer for organic photovoltaics prepared by a facile synthesis method10.1002/adma.201104771 ↗
20. Low-temperature solution-processed hydrogen molybdenum and vanadium bronzes for an efficient hole-transport layer in organic electronics10.1002/adma.201204425 ↗
21. Efficient and stable polymer solar cells with solution-processed molybdenum oxide interfacial layer10.1039/C2TA00325B ↗
22. A solution-processed MoOx anode interlayer for use within organic photovoltaic devices10.1002/adfm.201102622 ↗
23. Stable CdTe solar cell with V2O5 as a back contact buffer layer10.1016/j.solmat.2015.09.036 ↗
24. Flexible ITO-free organic solar cells applying aqueous solution-processed V2O5 hole transport layer: an outdoor stability study10.1063/1.4942638 ↗
25. Polymer solar cells with NiO hole-collecting interlayers processed by atomic layer deposition10.1016/j.orgel.2013.07.028 ↗
26. Efficient and stable polymer solar cells with annealing-free solution-processible NiO nanoparticles as anode buffer layers10.1039/C4TC01302F ↗
27. High fill factor polymer solar cells incorporating a low temperature solution processed WO3 hole extraction layer10.1002/aenm.201200330 ↗
28. Optimization of the power conversion efficiency of room temperature-fabricated polymer solar cells utilizing solution processed tungsten oxide and conjugated polyelectrolyte as electrode interlayer10.1002/adfm.201304256 ↗
29. Enhanced efficiency in plastic solar cells via energy matched solution processed NiOx interlayers10.1002/aenm.201100234 ↗
30. Solution-processed nickel oxide hole transport layers in high efficiency polymer photovoltaic cells10.1002/adfm.201202269 ↗
31. Efficient, Air-stable bulk heterojunction polymer solar cells using MoOx as the anode interfacial layer10.1002/adma.201100038 ↗
32. The effect of molybdenum oxide interlayer on organic photovoltaic cells10.1063/1.3220064 ↗
33. Energy level evolution of air and oxygen exposed molybdenum trioxide films10.1063/1.3454779 ↗
34. MoO3 doped 4,4′-N,N′-dicarbazole-biphenyl for low voltage organic light emitting diodes10.1063/1.3644159 ↗
35. Improved performances of organic light-emitting diodes with metal oxide as anode buffer10.1063/1.2430511 ↗
36. Efficient polymer photovoltaic cells using solution-processed MoO 3 as anode buffer layer10.1016/j.solmat.2010.01.004 ↗
37. MoO3 films spin-coated from a nanoparticle suspension for efficient hole-injection in organic electronics10.1002/adma.201003065 ↗
38. Solution-processed MoO3 thin films as a hole-injection layer for organic solar cells10.1021/am200729k ↗
39. Polymer solar cells with a low-temperature-annealed sol–gel-derived MoOx film as a hole extraction layer10.1002/aenm.201100598 ↗
40. Low-temperature, solution-processed molybdenum oxide hole-collection layer for organic photovoltaics10.1039/c2jm14911g ↗
41. Enhancing the performance of P3HT:ICBA based polymer solar cells using LiF as electron collecting buffer layer and UV-ozone treated MoO3 as hole collecting buffer layer10.1016/j.solmat.2012.12.006 ↗
42. Low-temperature, solution-processed MoO x for efficient and stable organic solar cells10.1021/am201825t ↗
43. A solution-processed MoOx anode interlayer for use within organic photovoltaic devices10.1002/adfm.201102622 ↗
44. Enhancing the performance of P3HT:ICBA based polymer solar cells using LiF as electron collecting buffer layer and UV–ozone treated MoO3 as hole collecting buffer layer10.1016/j.solmat.2012.12.006 ↗
45. Efficient ternary blend polymer solar cells with indene-C60 bisadductas an electron-cascade acceptor10.1039/c3ee44202k ↗
46. Poly (3, 4‐Ethylenedioxythiophene):methylnaphthalene sulfonate formaldehyde condensate: the effect of work function and structural homogeneity on hole injection/extraction properties
47. A one-step homogeneous immunoassay for cancer biomarker detection using gold nanoparticle probes coupled with dynamic light scattering10.1021/ja711298b ↗
48. Morphology-controllable synthesis and characterization of single-crystal molybdenum trioxide10.1021/jp055945n ↗
49. Optical, structural and electrochromic studies of molybdenum oxide thin films with nanorod structure10.1016/j.solidstatesciences.2009.10.021 ↗
50. Self-assembly and photoluminescence of molybdenum oxide nanoparticles10.1007/s00339-011-6345-9 ↗
51. Novel metastable hexagonal MoO3 nanobelts: synthesis, photochromic, and electrochromic properties10.1021/cm9023887 ↗
52. Two dimensional α-MoO3 nanoflakes obtained using solvent-assisted grinding and sonication method: application for H2 gas sensing10.1016/j.snb.2013.10.107 ↗
53. Electrochromic properties of nanocrystalline MoO3 thin films10.1016/j.tsf.2007.09.019 ↗
54. Improvement in the sensitivity of PPMMA electron beam resist by S and F atom doping10.1143/JJAP.31.2640 ↗
55. Chemically tailoring graphene oxides into fluorescent nanosheets for Fe3+ ion detection10.1016/j.carbon.2012.01.021 ↗
56. Bonding in some donor-acceptor complexes involving boron trifluoride. Study by means of ESCA and molecular orbital calculations10.1039/F29736900551 ↗
57. Efficient organic photovoltaic cells using hole-transporting MoO3 buffer layers converted from solution-processed MoS2 films10.1143/JJAP.50.071604 ↗
58. Molybdenum oxide thin films obtained by the hot-filament metal oxide deposition technique10.1021/cm034551a ↗
59. Oxygen vacancy formation on α-MoO3 slabs and ribbons10.1021/acs.jpcc.6b06589 ↗
60. Thermal study of types of water associated with clinoptilolite10.1346/CCMN.1981.0290510 ↗
61. DSC and TG study of water adosorption and desorption on zeolite NaA powder and attached as layer on metal10.1023/A:1010137307816 ↗
62. A simple synthesis method to prepare a molybdenum oxide hole-transporting layer for efficient polymer solar cells10.1039/C7RA00303J ↗
63. Dipole induced anomalous S-shape I-V curves in polymer solar cells10.1063/1.3117513 ↗
64. Charge accumulation induced S-shape J–V curves in bilayer heterojunction organic solar cells10.1016/j.orgel.2011.02.016 ↗
65. Transition metal oxides as the buffer layer for polymer photovoltaic cells10.1063/1.2174093 ↗
66. Low-temperature MoO3 film from a facile synthetic route for an efficient anode interfacial layer in organic optoelectronic devices10.1039/C3TC31580K ↗
67. Improving power conversion efficiency of polymer solar cells by doping copper phthalocyanine10.1016/j.electacta.2015.08.090 ↗
68. Optical properties and electronic structures of layered MoO3 single crystals
69. Integrated optoelectronic devices based on conjugated polymers10.1126/science.280.5370.1741 ↗
70. Lifetime of organic photovoltaics: status and predictions10.1002/aenm.201501208 ↗