journal article·2016-10

Role of Mo:Na layer on the formation of MoSe2 phase in Cu(In,Ga)Se2 thin film solar cells

Yi-Cheng Lin, Ding-Hao Hong, Yin-Ting Hsieh, Li-Ching Wang, Hung-Ru Hsu

Publisher page

Abstract

Abstract This study investigated the influence of Mo:Na on the formation of MoSe2 in Cu(In, Ga)Se2 (CIGS) thin film solar cells and its overall effect on the performance of cells with a structure of Ti/Mo:Na/Mo/CIGS/CdS/i-ZnO/ZnOAl/Al. Varying the thickness of the Mo:Na layer enabled the systematic control of the diffusion of Na into the CIGS layer. Experimental results demonstrate that the thickness of MoSe2 phase decreases with an increase in the thickness of the Mo:Na layer. Reducing the thickness of the MoSe2 layer enhanced cell efficiency. Additionally, Ga distribution in the CIGS layer may vary with a change in the thickness of the Mo:Na layer. When Mo:Na/Mo=500/500 nm, the Ga content and the thickness of the MoSe2 layer were close to optimal with regard to cell performance. This paper proposes a model to explain the impact of Na doping on the formation of MoSe2 phase formation in polycrystalline CIGS. It appears that the addition of Na leads to the formation of Na2Sex at the grain boundaries in the absorber layer, which reduces the diffusion of Se to form MoSe2.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Efficiency enhancement of Cu(In,Ga)Se2 solar cells due to post-deposition Na incorporation10.1063/1.1646758 ↗
2. Photoluminescence properties of Sodium incorporation in CuInSe2 and CuIn3Se5 thin films10.1016/S0927-0248(00)00294-4 ↗
3. M. Ruckh, D. Schmid, M. Kaiser, R. Sch¨affler, T. Walter, H.W. Schock, Influence of substrates on the electrical properties of Cu(In,Ga)Se2 thin films, Proceedings of the 1994 IEEE First World Conference on Photovoltaic Energy Conversion, 1994, 156–159.10.1109/WCPEC.1994.519831 ↗
4. Improved compositional flexibility of CIGS based thin film solar cells by sodium control technique10.1016/S0927-0248(97)00202-X ↗
5. Na in selenized Cu(In,Ga)Se2 on Na-containing and Na-free glasses: distribution, grain structure, and device performances10.1016/S0040-6090(00)01028-2 ↗
6. Impact of different Na-incorporating methods on Cu(In,Ga)Se2 thin film solar cells with a low-Na Substrate10.1364/AO.49.001662 ↗
7. Modeling the effects of Na incorporation on CIGS solar cells10.1109/JPHOTOV.2012.2221082 ↗
8. Sodium-doped Molybdenum back contact designs for Cu(In,Ga)Se2 solar cells10.1016/j.solmat.2014.01.020 ↗
9. Electrical properties of the Cu(In,Ga)Se2/MoSe2/Mo structure10.1016/S0927-0248(00)00283-X ↗
10. Characterization of the Mo/Cu(In,Ga)Se2 interface in CIGS solar cells10.1016/S0040-6090(00)01846-0 ↗
11. Effects of selenization conditions on densification of Cu(In,G)a)Se2 (CIGS) (thin films prepared by spray deposition of CIGS nanoparticles)10.1063/1.3141755 ↗
12. MoSe2 thin film synthesized by solid state reactions between Mo and Se thin films10.1051/rphysap:01990002508080700 ↗
13. Control of an interfacial MoSe2 layer in Cu2ZnSnSe4 thin film solar cells: 8.9% power conversion efficiency with a TiN diffusion barrier10.1063/1.4740276 ↗
14. Formation and characterization of MoSe2 for Cu(In,Ga)Se2 based solar cells10.1016/j.tsf.2004.11.098 ↗
15. A study on MoSe2 layer of Mo contact in Cu(In,Ga)Se2 thin film solar cells10.1016/j.tsf.2014.04.016 ↗
16. J.H. Yoon, K.H. Yoon, J.K. Kim, J.K. Park, T.S. Lee, Y.J. Baik, T.Y. Seong, J.H. Jeong, Effect of the back contact microstructure on the preferred orientation of CIGS thin films, 35th IEEE Photovoltaic specialists conference, 2010, 2443–2447.10.1109/PVSC.2010.5614175 ↗
17. Comparison of thin film properties and selenization behavior of CuGaIn precursors prepared by co-evaporation and co-sputtering10.1016/j.jallcom.2012.10.039 ↗
18. S.J. Ahn, K.H. Kim, K.H. Yoon, MoSe2 formation from selenization of Mo and nanoparticle derived Mo/Cu(In,Ga)Se2 films, IEEE 4th World Conference on Photovoltaic Energy Conversion, Hawai, 2006, 506–50810.1109/WCPEC.2006.279502 ↗
19. Determining factor of MoSe2 Formation in Cu(In,Ga)Se2 solar cells10.1016/j.solmat.2012.02.015 ↗
20. Improved efficiency of a large-area Cu(In,Ga)Se2 solar cell by a nontoxic hydrogen-assisted solid Se vapor selenization process10.1021/am405780z ↗
21. Improving simultaneous of crystallization and Ga homogenization in Cu(In,Ga)Se2 film using an evaporated In film10.1016/j.jallcom.2013.03.257 ↗
22. Raman investigation of InSe and GaSe single-crystals oxidation10.1088/0268-1242/17/2/101 ↗
23. Sequential sputtering/selenization technique for the growth of CuInSe2 thin films10.1143/JJAP.37.L1065 ↗
24. The effect of Na in polycrystalline and epitaxial single-crystal CuIn1−xGaxSe210.1016/j.tsf.2004.11.038 ↗
25. Effects of Na on the electrical and structural properties of CuInSe210.1063/1.370534 ↗
26. Effects of sodium on polycrystalline Cu(In,Ga)Se2 and its solar cell performance10.1002/(SICI)1521-4095(199801)10:1<31::AID-ADMA31>3.0.CO;2-3 ↗
27. Na-induced variations in the structural, optical, and electrical properties of Cu (In,Ga)Se2 thin films10.1063/1.3190528 ↗
28. Photoluminescence properties of sodium incorporated in CuInSe2 thin films10.1143/JJAP.38.L289 ↗
29. Influence of sodium on the growth of polycrystalline Cu(In,Ga)Se2 thin films10.1016/S0040-6090(99)00777-4 ↗