Atomic layer deposited zinc oxysulfide n-type buffer layers for Cu2ZnSn(S,Se)4 thin film solar cells
Source abstract
Abstract
Abstract The structural, electrical, chemical, and optical properties of ternary Zn(O,S) thin films formed by atomic layer deposition (ALD) were investigated. It was revealed that the film׳s characteristics were highly influenced by the O/(O+S) ratio. The n-type Zn(O,S) layer was applied to both S-rich and Se-rich Cu2ZnSn(S,Se)4 (CZTSSe) absorbers as an alternative buffer layer to conventional CdS. The device performance relationship to the O/(O+S) ratio was examined. The highest power-conversion efficiency (PCE) of 2.75% and 3.30% was achieved using an actual O/(O+S) ratio of ~0.67 in the buffer layer for S-rich and Se-rich CZTSSe solar cells, and these PCEs correspond to 77% and 67% of the standard CdS-based solar cells, respectively. Further improvement in Se-rich CZTSSe was demonstrated by using NH4OH solution instead of pure H2O as oxygen source during ALD process. The dependence of the solar cell performance on the O/(O+S) ratio was investigated using dark current density–voltage (J–V), external quantum efficiency (EQE), transmission electron microscopy (TEM), and energy-dispersive X-ray spectroscopy (EDX).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Transparent conducting oxide semiconductors for transparent electrodes10.1088/0268-1242/20/4/004 ↗
2. Criteria for choosing transparent conductors10.1557/mrs2000.151 ↗
3. Thin-film solar cells: an overview10.1002/pip.541 ↗
4. ZnO/Al2O3 nanolaminates fabricated by atomic layer deposition: growth and surface roughness measurements10.1016/S0040-6090(02)00427-3 ↗
5. Theoretical analysis of the effect of conduction band offset of window/CIS layers on performance of CIS solar cells using device simulation10.1016/S0927-0248(00)00266-X ↗
6. Efficiency limitations for wide-band-gap chalcopyrite solar cells10.1016/j.tsf.2004.11.018 ↗
7. Buffer layers in Cu(In,Ga)Se2 solar cells and modules10.1016/j.tsf.2004.11.118 ↗
8. Properties of 19.2% efficiency ZnO/CdS/CuInGaSe2 thin-film solar cells10.1002/pip.494 ↗
9. Optimization of CBD CdS process in high-efficiency Cu(In,Ga)Se2-based solar cells10.1016/S0040-6090(01)01538-3 ↗
10. Ultrathin amorphous zinc–tin-oxide buffer layer for enhancing heterojunction interface quality in metal-oxide solar cells10.1039/c3ee24461j ↗
11. The effect of Zn1−xSnxOy buffer layer thickness in 18.0% efficient Cd-free Cu(In,Ga)Se2 solar cells10.1002/pip.2239 ↗
12. Evaluation of Zn–Sn–O buffer layers for CuIn0.5Ga0.5Se2 solar cells10.1002/pip.1039 ↗
13. Optimization of ALD-(Zn, Mg)O buffer layers and (Zn, Mg)O/Cu(In,Ga)Se2 interfaces for thin film solar cells10.1016/j.tsf.2006.12.047 ↗
14. Atomic layer deposition of Zn1−xMgxO buffer layers for Cu(In,Ga)Se2 solar cells10.1002/pip.733 ↗
15. Zn(O,S) buffer layers by atomic layer deposition in Cu(In,Ga)Se2 based thin film solar cells: Band alignment and sulfur gradient10.1063/1.2222067 ↗
16. K. Ramanathan, J. Mann, S. Glynn, S. Christensen, J. Pankow, J. Li, J. Scharf, L. Mansfield, M. Contreras, R. Noufi, A comparative study of Zn(O,S) buffer layers and CIGS solar cells fabricated by CBD, ALD, and sputtering, in: Proceeding of the 38th IEEE Photovoltaic Specialists Conference (PVSC), 2012, pp. 001677–001681.10.1109/PVSC.2012.6317918 ↗
17. Strong valence-band offset bowing of ZnO1−xSx enhances p-type nitrogen doping of ZnO-like alloys10.1103/PhysRevLett.97.146403 ↗
18. Applications of atomic layer deposition in solar cells10.1088/0957-4484/26/6/064001 ↗
19. Enhancing the efficiency of SnS solar cells via band-offset engineering with a zinc oxysulfide buffer layer10.1063/1.4789855 ↗
20. Band offsets of n-type electron-selective contacts on cuprous oxide (Cu2O) for photovoltaics10.1063/1.4905180 ↗
21. Electrical characterization of CIGSe solar cells metastability with Zn(S,O,OH)–ZnMgO interface buffer layers10.1016/j.solmat.2010.07.004 ↗
22. Zn(O,S) buffer prepared by atomic layer deposition for sequentially grown Cu(In,Ga)(Se,S)2 solar cells and modules10.1016/j.solmat.2014.03.044 ↗
23. Above 16% efficient sequentially grown Cu(In,Ga)(Se,S)2-based solar cells with atomic layer deposited Zn(O,S) buffers10.1002/pip.2579 ↗
24. CZTS nanocrystals: a promising approach for next generation thin film photovoltaics10.1039/c3ee41627e ↗
25. Kesterite thin-film solar cells: advances in materials modelling of Cu2ZnSnS410.1002/aenm.201100630 ↗
26. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
27. Cu2ZnSnSe4 thin-film solar cells by thermal co-evaporation with 11.6% efficiency and improved minority carrier diffusion length10.1002/aenm.201401372 ↗
28. Thin film solar cell with 8.4% power conversion efficiency using an earth-abundant Cu2ZnSnS4 absorber10.1002/pip.1174 ↗
29. Zn(O,S) buffer layers and thickness variations of CdS buffer for Cu2ZnSnS4 solar cells10.1109/JPHOTOV.2013.2283058 ↗
30. Sputtered (Zn,Mg)O buffer layer for band offset control in Cu2ZnSn(S,Se)4 solar cells10.7567/JJAP.53.106502 ↗
31. Growth of ZnO/Al2O3 alloy films using atomic layer deposition techniques10.1021/cm020607+ ↗
32. (Sn,Al)Ox Films grown by atomic layer deposition10.1021/jp202202x ↗
33. Atomic layer deposited zinc tin oxide channel for amorphous oxide thin film transistors10.1063/1.4752727 ↗
34. Improved Cu2O-based solar cells using atomic layer deposition to control the Cu oxidation state at the p–n junction10.1002/aenm.201301916 ↗
35. Growth characteristics, material properties, and optical properties of zinc oxysulfide films deposited by atomic layer deposition10.1116/1.3664758 ↗
36. Nanoengineering and interfacial engineering of photovoltaics by atomic layer deposition10.1039/c1nr10349k ↗
37. Atomic layer deposition of metal sulfide materials10.1021/ar500360d ↗
38. Sputtering processed highly efficient Cu2ZnSn(S,Se)4 solar cells by a low-cost, simple, green, and up-scalable strategy10.1039/C5GC02417J ↗
39. Fabrication of 5.2% efficient Cu2ZnSn(S,Se)4 solar cells using DC-sputtered metal precursors followed by sulfo-selenization10.1002/pssc.201400287 ↗
40. Photoelectrochemical properties of CdS sensitized ZnO nanorod arrays: effect of nanorod length10.1063/1.4745881 ↗
41. Band alignment of SnS/Zn(O,S) heterojunctions in SnS thin film solar cells10.1063/1.4821433 ↗
42. Improvement of Cu2ZnSn(S,Se)4 solar cell efficiency by surface treatment10.1002/pssc.201400309 ↗
43. Universality of non-Ohmic shunt leakage in thin-film solar cells10.1063/1.3518509 ↗
44. Tunneling-enhanced recombination in Cu(In, Ga)Se2 heterojunction solar cells10.1063/1.122967 ↗
45. Band alignments of different buffer layers (CdS, Zn(O,S), and In2S3) on Cu2ZnSnS410.1063/1.4873715 ↗
46. The band offset at CdS/Cu2ZnSnS4 heterojunction interface10.1007/s13391-012-2023-0 ↗
47. Band alignment at the Cu2ZnSn(SxSe1−x)4/CdS interface10.1063/1.3600776 ↗
48. Thin-film solar cells: device measurements and analysis10.1002/pip.518 ↗
49. K. Timmo, M. Altosaar, J. Raudoja, M. Grossberg, M. Danilson, O. Volobujeva, E. Mellikov, Chemical etching of Cu2ZnSn(S,Se)4 monograin powder, in: Proceedings of the 35th IEEE Photovoltaic Specialists Conference (PVSC), 2010, pp. 001982–001985.10.1109/PVSC.2010.5616411 ↗
50. Development of a selective chemical etch to improve the conversion efficiency of Zn-Rich Cu2ZnSnS4 solar cells10.1021/ja301373e ↗
51. Interplay between surface preparation and device performance in CZTSSe solar cells: effects of KCN and NH4OH etching10.1016/j.solmat.2015.01.006 ↗