Determination of the degree of ethylene vinyl acetate crosslinking via Soxhlet extraction: Gold standard or pitfall?
Source abstract
Abstract
Abstract Since the beginning of PV module production, Soxhlet extraction has been the standard method for the determination of the gel content and the resulting calculation of the degree of crosslinking of the most common PV encapsulant ethylene vinyl acetate (EVA). While the method is deemed well established and several pertinent ASTM and ISO standards exist, in practise the actual procedures used in – and trusted by – both industry and R&D institutions vary substantially. To evaluate the reliability of the methods and the comparability of the results, a round-robin test involving seven independent European laboratories – one industrial PV module manufacturer and six R&D facilities – was conducted. The measurements were performed using homogenous, anonymized sample sets, each comprising five differently crosslinked EVA foils. The analysis showed that results obtained for the same samples may deviate significantly, but also that very different analytical procedures can yield comparable values. In a systematic study, the impact of various key parameters of the analytical process (extraction time and solvent, drying conditions, sample size and weight etc.) was investigated. Based on these findings, deviations observed in the round-robin study could be linked to their origins and the main pitfalls were identified. In conclusion, a suggestion for an optimised standard procedure was derived to ensure comparable results at all laboratories.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Photovoltaic Systems and Sustainability · Photovoltaic System Optimization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (10)
Show source-provided references
1. Interdependency of mechanical failure rate of encapsulated solar cells and module design parameters10.1117/12.929289 ↗
2. Peroxide vulcanization of elastomers10.5254/1.3547647 ↗
3. Determining the degree of crosslinking of ethylene vinyl acetate photovoltaic module encapsulants—a comparative study10.1016/j.solmat.2013.04.022 ↗
4. 〈http://www.laytec.de/xlink/〉
5. Non-destructive determination of ethylene vinyl acetate cross-linking in photovoltaic (PV) modules by Raman Spectroscopy10.1366/13-07085 ↗
6. Ch. Hirschl, M. Biebl–Rydlo, W. Mühleisen, L. Neumaier, G. Eder, B. Chernev, M. Kraft, Raman spectroscopic determination of the degree of encapsulant crosslinking in PV modules, in: Proceedings of the 28th PVSEC-European Photovoltaic Solar Energy Conference and Exhibition, pp. 3020–3025. Available at: 〈http://dx.doi.org/10.4229/28thEUPVSEC2013-4AV.4.2〉, 2013.
7. American Society for Testing and Materials, Standard Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics, ASTM D2765–11. 〈http://dx.doi.org/10.1520/D2765-11〉, 2006.10.1520/D2765-11 ↗
8. International Organization for Standardization, Pipes and Fittings Made of Crosslinked Polyethylene (PE-X)-Estimation of the Degree of Crosslinking by Determination of the Gel Content, EN ISO 10147:2011, 2012.
9. International Organization for Standardization, Plastics-Determination of Matter Extractable by Organic Solvents (Conventional Methods), EN ISO 6427:2014, 2014.
10. S.H. Schulze, C. Ehrich, I. Hinz, M. Schak, Crosslinking of EVA copolymers by thermal and radiation curing processes, in: Proceedings of the Plastics in Photovoltaics 2012 Conference, Phoenix/Arizona, 2012.