High temperature stable solar selective coatings by cathodic arc PVD for heat collecting elements
Source abstract
Abstract
A functionally multilayered Cr/CrTiAlN-G/TiAlN/AlSiN/AlSiO coating configuration, suitable for enhancing solar selectivity of stainless steel substrates used in concentrated solar power (CSP) systems, has been formulated using cathodic arc physical vapor deposition (CAPVD) technique. The sequence of functional layers was decided based on their refractive index values and their relative thickness was optimized to achieve maximum solar selectivity. The optimized coating exhibits encouraging values of solar absorptivity ( α) – 0.95 and thermal emissivity ( ε) – 0.09 to 0.14 up to 600 °C. Further, the solar selectivity factor ( α/ ε) for the coating is found to be comparable with the best selective coatings currently available for elevated temperature operation. The coatings were also studied for their long term stability and found to be stable up to 500 °C, although considerable change in optical properties was observed on increasing the temperature to 600 °C. The noted properties make the present coating a promising candidate as a high temperature solar selective coating on stainless steel substrates.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solar Thermal and Photovoltaic Systems · solar cell performance optimization · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Fabrication and optimisation of highly efficient cermet-based spectrally selective coatings for high operating temperature10.1016/j.tsf.2009.03.191 ↗
2. Stability of W-Al2O3 cermet based solar coating for receiver tube operating at high temperature10.1016/j.solmat.2010.04.080 ↗
3. Optimisation of metal sputtered and electroplated substrates for solar selective coatings10.1016/j.renene.2007.06.025 ↗
4. Composite semiconductors: selective absorbers of solar energy10.1016/0165-1633(79)90060-1 ↗
5. Thermal stability of nitride solar selective absorbing coatings used in high temperature parabolic trough current10.1007/s11431-010-3176-4 ↗
6. Structure and optical properties of pulsed sputter deposited CrxOy/Cr/Cr2O3 solar selective coatings10.1063/1.2831364 ↗
7. Functional multilayer nitride coatings for high temperature solar selective applications10.1016/j.solmat.2013.10.024 ↗
8. Recent progress in high-temperature solar selective coatings10.1016/S0927-0248(99)00136-1 ↗
9. Principles and applications of selective solar coatings10.1116/1.568712 ↗
10. Characterization of Ti1−xAlxN coatings with selective IR reflectivity10.1016/j.solener.2010.04.021 ↗
11. Coatings for enhanced photo thermal energy collection10.1016/0165-1633(79)90001-7 ↗
12. Thermal aging characteristics of CrNxOy solar selective absorber coating for flat plate solar thermal collector applications10.1016/j.solmat.2013.03.005 ↗
13. Graded selective coatings based on chromium and titanium oxynitride10.1016/S0040-6090(03)00967-2 ↗
14. Growth, characterization and performance evaluation of Ti/AlTiN/AlTiON/AlTiO high temperature spectrally selective coatings for solar thermal power applications10.1016/j.solmat.2014.07.037 ↗
15. Influence of microstructure on temperature-induced ageing mechanisms of different solar absorber coatings10.1016/j.solmat.2013.09.026 ↗
16. Pt-Al2O3 nanocoatings for high temperature concentrated solar thermal power applications10.1016/j.physb.2011.09.104 ↗
17. Improvement of thermal stability in the solar selective absorbing Mo–Al2O3 coatings10.1016/j.solmat.2012.11.010 ↗
18. High performance W-AlN cermet solar coatings designed by modelling calculations and deposited by DC magnetron sputtering10.1016/j.solmat.2003.08.021 ↗
19. Spectrally selective composite coatings of Cr–Cr2O3 and Mo–Al2O3 for solar energy applications10.1016/S0040-6090(01)01051-3 ↗
20. Structure and optical properties of Ag-Al2O3 nanocermet solar selective coating prepared using unbalanced magnetron sputtering10.1016/j.solmat.2011.01.034 ↗
21. Cathodic arc plasma deposition technology10.1016/0040-6090(88)90494-4 ↗
22. Tribological properties of (Ti,Al)N coatings deposited at different bias voltages using the cathodic arc technique10.1016/S0257-8972(01)01296-8 ↗
23. Cathodic arc deposition of solar thermal selective surfaces10.1016/0927-0248(96)00026-8 ↗
24. Optimization of solar absorbing three-layer coatings10.1016/j.solmat.2005.03.009 ↗
25. Ranking solar absorber structural parameters in terms of impact on performance and stability10.1016/0040-6090(83)90071-8 ↗
26. Energy conservation with the use of solar selective coatings10.1108/00035599810194141 ↗
27. Selective thin film coatings for the conversion of solar radiation10.1016/0376-4583(83)90111-5 ↗
28. Properties of (Ti,Cr,Al)N coatings with high Al content deposited by new plasma enhanced arc-cathode10.1016/S0257-8972(03)00580-2 ↗
29. Microstructure and thermal stability of Ti1−xAlxN coatings deposited by reactive magnetron co-sputtering10.1016/j.phpro.2011.06.085 ↗
30. Solar selective absorbers based on Al2O3:W cermets and AlSiN/AlSiON10.1016/j.solmat.2015.01.029 ↗
31. Optimal design of light trapping in thin-film solar cells enhanced with graded SiNx and SiOxNy structure10.1364/OE.20.011121 ↗
32. Optimization and analysis of solar selective surfaces with continuous and multilayer profiles10.1063/1.359124 ↗
33. Growth kinetics and mechanisms of aluminium-oxide films formed by thermal oxidation10.1063/1.1491591 ↗
34. Mechanical behaviour of (Ti,Al)N coatings exposed to elevated temperatures and an oxidative environment10.1016/S0257-8972(00)00939-7 ↗
35. Double layer SiO2/Al2O3 high thermal emissivity coatings on stainless steel substrates using simple spray deposition system10.1016/j.apsusc.2014.01.159 ↗