journal article·2012-05

Mechanism for dimethylformamide-treatment of poly(3,4-ethylenedioxythiophene): poly(styrene sulfonate) layer to enhance short circuit current of polymer solar cells

Cheng Gong, Hong Bin Yang, Qun Liang Song, Zhi Song Lu, Chang Ming Li

Publisher page

Abstract

Abstract Dimethylformamide (DMF), an organic solvent, was used to treat the poly(3, 4-ethylenedioxythiophene): poly(styrene sulfonate) (PEDOT: PSS) layer in poly(3-hexylthiophene) (P3HT): [6,6]-phenyl C61-butyric acid methyl ester (PCBM) polymer solar cells, resulting in significant enhancement of photocurrent and power conversion efficiency (PCE) improvement by 70%. Analyses of I–V characteristics reveal that the change in the active layer rather than that of the PEDOT: PSS buffer layer is ascribed to performance improvement. AFM images indicate that the roughness of PEDOT: PSS layer has been increased after the treatment. We argue that the protrudent PEDOT: PSS could serve as the centers for an initial crystallization of P3HT chains leading to a better alignment of P3HT: PCBM domains for a greatly enhanced photocurrent.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Two-layer organic photovoltaic cell10.1063/1.96937 ↗
2. Morphology of composites of semiconducting polymers mixed with C6010.1016/S0379-6779(97)80058-6 ↗
3. Laminated fabrication of polymeric photovoltaic diodes10.1038/26183 ↗
4. Hybrid nanorod–polymer solar cells10.1126/science.1069156 ↗
5. Polymer solar cell based on poly(2,6-bis(3-alkylthiophen-2-yl)dithieno-[3,2-b;2′,3′-d]thiophene)10.1016/j.solmat.2009.07.005 ↗
6. Evidence of harvesting electricity by exciton recombination in an n−n type solar cell10.1021/ja1003735 ↗
7. Electrochemically polymerized nanostructured poly(3,4-ethylenedioxythiophene)–poly(styrenesulfonate) buffer layer for a high performance polymer solar cell10.1039/c0ee00117a ↗
8. The degradation of indium tin oxide/pentacene/fullerene/tris-8-hydroxy-quinolinato aluminum/aluminum heterojunction organic solar cells: by oxygen or moisture?10.1016/j.solmat.2010.01.006 ↗
9. Solar cells made from polymers containing Dithieno[3,2-b:2′,3′-d]pyrrole with different side chain lengths10.1016/j.solmat.2010.11.034 ↗
10. Microscopic understanding of the anisotropic conductivity of PEDOT:PSS thin films10.1002/adma.200602575 ↗
11. Poly(3-hexylthiophene)/ZnO hybrid pn junctions for microelectronics applications10.1063/1.3114442 ↗
12. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
13. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
14. Using light-induced thermocleavage in a roll-to-roll process for polymer solar cells10.1021/am900858x ↗
15. Upscaling of polymer solar cell fabrication using full roll-to-roll processing10.1039/b9nr00430k ↗
16. The effect of post-processing treatments on inflection points in current–voltage curves of roll-to-roll processed polymer photovoltaics10.1016/j.solmat.2010.06.007 ↗
17. Low band gap polymers for roll-to-roll coated polymer solar cells10.1021/ma1015903 ↗
18. Degradation patterns in water and oxygen of an inverted polymer solar cell10.1021/ja106299g ↗
19. Conductivity, work function, and environmental stability of PEDOT: PSS thin films treated with sorbitol10.1016/j.orgel.2008.05.006 ↗
20. A morphological model for the solvent-enhanced conductivity of PEDOT:PSS thin films10.1002/adfm.200700796 ↗
21. On the mechanism of conductivity enhancement in poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) film through solvent treatment10.1016/j.polymer.2004.10.001 ↗
22. Using modified poly(3,4-ethylene dioxythiophene): poly(styrene sulfonate) film as a counter electrode in dye-sensitized solar cells10.1016/j.solmat.2007.03.024 ↗
23. Influence of doped PEDOT:PSS on the performance of polymer solar cells10.1016/j.solmat.2011.04.040 ↗
24. Performance improvement of polymer solar cells by using a solvent-treated poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) buffer layer10.1063/1.3600665 ↗
25. films with significantly enhanced conductivities induced by preferential solvation with cosolvents and their application in polymer photovoltaic cells10.1039/c0jm04177g ↗
26. The effect of introducing a buffer layer to polymer solar cells on cell efficiency10.1016/j.solmat.2010.12.026 ↗
27. Area dependent efficiency of organic solar cells10.1063/1.2998540 ↗
28. Extraction of Schottky diode parameters including parallel conductance using a vertical optimization method10.1016/S0038-1101(01)00337-9 ↗
29. Molecular and morphological influences on the open circuit voltages of organic photovoltaic devices10.1021/ja9007722 ↗
30. Open circuit voltage enhancement due to reduced dark current in small molecule photovoltaic cells
31. A new method to determine the optimum load of a real solar cell using the Lambert W-function10.1016/j.solmat.2008.07.004 ↗
32. How to model the behaviour of organic photovoltaic cells10.1002/pi.2038 ↗
33. Morphology evolution via self-organization and lateral and vertical diffusion in polymer:fullerene solar cell blends10.1038/nmat2102 ↗
34. A microscopic model for the behavior of nanostructured organic photovoltaic devices10.1063/1.2718865 ↗