The influence of cracked selenium flux on CIGS thin film growth and device performance prepared by two-step selenization processes
Source abstract
Abstract
Abstract Thermal-cracking system has been adopted to produce cracked selenium and the influence of cracked selenium flux on the structure and reaction pathway during the first-step selenization is investigated. High Cracked-Selenium (HC-Se) may facilitate the Cu–Se and In–Se reaction at lower temperatures. The “Polygon grains” observed in the HC-Se samples play a key role in further selenium diffusion into the film since they make the film more incompact. In addition, activation energy analysis indicates that Cu 2− x Se and β-In 2 Se 3 formed in the samples prepared in HC-Se atmosphere may result in different growth pathway of Cu(In 1− x Ga x )Se 2 (CIGS) thin film compared with that prepared in Low Cracked-Selenium (LC-Se) atmosphere during the first-step selenization, which restrains lamination in CIGS films effectively so that the distribution of Ga is more uniform throughout CIGS films and no small grains of CuGaSe 2 (CGS) accumulate near the Mo back-contact. As a result, the shunt conductance in this CIGS thin film device prepared in HC-Se is reduced, and the fill factor, open-circuit voltage, as well as the cell efficiency are improved.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Phase-change materials and chalcogenides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. High-efficiency Cu(In,Ga)Se2 cells and modules10.1016/j.solmat.2013.05.002 ↗
2. Solar cell efficiency tables (version 36)10.1002/pip.1021 ↗
3. Properties of Cu(In,Ga)Se2 solar cells with new record efficiencies up to 21.7%10.1002/pssr.201409520 ↗
4. In-situ electrical resistance measurement of the selenization process in the CuInGa–Se system10.1016/j.tsf.2010.08.017 ↗
5. Preferred orientation of Cu(In,Ga)Se2 thin film deposited on stainless steel substrate10.1002/pip.2164 ↗
6. Dependence of Se beam pressure on defect states in CIGS-based solar cells10.1016/j.solmat.2010.04.036 ↗
7. Electrical characterization of Cu(In,Ga)Se2 thin-film solar cells and the role of defects for the device performance10.1016/S0927-0248(00)00273-7 ↗
8. CuIn1−xGaxSe2-based thin film solar cells by the selenization of sequentially evaporated metallic layers10.1002/pip.649 ↗
9. Interface control to enhance the fill factor over 0.70 in a large-area CIS-based thin-film PV technology10.1016/j.tsf.2008.10.125 ↗
10. H. Sato, T. Hama, E. Niemi, et al., in: Proceedings of the 23rd IEEE Photovoltaic Specialists Conference, 1993, pp. 521–526.
11. Preparation of homogeneous CIGS films by selenizaiton of metal precursors in H2Se atmosphere10.1063/1.114424 ↗
12. CIGS absorbers and processes10.1002/pip.969 ↗
13. Toward GW/year of CIGS production within the next decade10.1016/j.solmat.2007.04.003 ↗
14. The influence of alloy phases in the precursors on the selenization reaction mechanisms10.1088/0022-3727/42/12/125303 ↗
15. Characterization of co-sputtered Cu–In alloy precursors for CuInSe2 thin films fabrication by close-spaced selenization10.1016/S0927-0248(98)00102-0 ↗
16. Texture and morphology variations in (In, Ga) 2Se3 and Cu (In, Ga) Se2 thin films grown with various Se source conditions10.1002/pip.1227 ↗
17. Low-temperature growth of ZnSe by molecular beam epitaxy using cracked selenium10.1063/1.102680 ↗
18. Cu (In, Ga) Se2 thin-film solar cells grown with cracked selenium10.1016/j.jcrysgro.2008.09.091 ↗
19. Effect of Se flux on CuIn1−xGaxSe2 film in reactive sputtering process10.1002/pip.1202 ↗
20. Large grain Cu(In, Ga)Se2 thin film growth using a Se-radical beam source10.1016/j.solmat.2008.09.043 ↗
21. Novel in situ resistance measurement for the investigation of CIGS growth in a selenization process10.1088/0268-1242/24/3/035019 ↗
22. Chang · 1999 · 41
23. Investigation of compositional inhomogeneities in complex polycrystalline Cu(In,Ga)Se2 layers for solar cells10.1063/1.3280049 ↗
24. Raman scattering and structural analysis of electrodeposited CuInSe2 and S-rich quaternary CuIn(S,Se)2 semiconductors for solar cells10.1002/pssa.200881239 ↗
25. Raman investigations of Cu(In, Ga)Se2 thin films with various copper contents10.1016/j.tsf.2008.07.011 ↗
26. In-situ observation of CuInSe2 formation process using high-temperature X-ray diffraction analysis10.1016/S0040-6090(98)01747-7 ↗
27. Defect-induced nonpolar-to-polar transition at the surface of CuInSe210.1016/S0022-3697(03)00148-3 ↗
28. Reconstruction and energetics of the polar (112) and (112¯) versus the nonpolar (220) surfaces of CuInSe210.1103/PhysRevB.65.081402 ↗
29. Defect-induced nonpolar-to-polar transition at the surface of chalcopyrite semiconductors10.1103/PhysRevB.64.241304 ↗
30. Texture manipulation of CuInSe2 thin films10.1016/S0040-6090(99)00778-6 ↗
31. Reaction kinetics of a-CuInSe2 formation from an In2Se3/CuSe bilayer precursor film10.1016/j.jpcs.2005.09.074 ↗
32. In situ investigation on selenization kinetics of Cu–In precursor using time-resolved, high temperature X-ray diffraction10.1016/j.jcrysgro.2006.05.066 ↗
33. Device and material characterization of Cu(In, Ga)Se2 solar cells with increasing band gap10.1063/1.361431 ↗
34. Diode characteristics in state of the art ZnO/CdS/Cu(In1−x,Gax)Se2 solar cells10.1002/pip.626 ↗