Monolithically integrated flexible Cu(In,Ga)Se2 solar cells and submodules using newly developed structure metal foil substrate with a dielectric layer
Source abstract
Abstract
Abstract Monolithically integrated Cu(In x Ga 1− x )Se 2 (CIGS) submodules having a certified efficiency of as high as 15.9% (16 cells, a designated area of 69.6 cm 2 ) were successfully fabricated on flexible substrates with a newly developed structure. This proved not only to achieve high efficiencies, but also to enable implementation of a low-cost manufacturing technique: roll-to-roll processing and monolithical integration. The newly developed substrates have a laminated structure with an Al 2 O 3 dielectric layer formed by anodization on stainless steel, and satisfy the crucial requirements for manufacturing flexible CIGS submodules, including thermal stability over 500 °C, a well-matched coefficient of thermal expansion for CIGS, an absence of impurities in the CIGS, sufficient dielectric properties, flexibility for roll-to-roll processing, low weight, and low material costs. Therefore, fabrication of modules on this flexible substrate offers the following attractive merits: high efficiency, low cost, and easy installation. Until now, no flexible substrates have satisfied these requirements all at once, our substrate is the most promising candidate for attractive flexible CIGS modules instead of conventional rigid CIGS modules.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · ZnO doping and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Characterization of Cu(In,Ga)Se2 materials used in record performance solar cells10.1016/j.tsf.2005.11.097 ↗
2. New world record efficiency for Cu(In,Ga)Se2 thin film solar cells beyond 20%10.1002/pip.1078 ↗
3. Flexible Cu(In,Ga)Se2 on Al foils and the effects of Al during chemical bath deposition10.1016/j.tsf.2006.12.152 ↗
4. J.R. Tuttle, A. Szalaj, J. Keane, A 15.2% AM0/1433W/kg thin-film CIGS solar cell for space applications, in: Proceedings of the Conference Record of the 28th IEEE Photovoltaic Specialists Conference, 2000, pp. 1042–104510.1109/PVSC.2000.916065 ↗
5. Alkali incorporation control in Cu(In,Ga)Se2 thin films using silicate thin layers and applications in enhancing flexible solar cell efficiency10.1063/1.2992061 ↗
6. Na-induced variations in the structural, optical, and electrical properties of Cu(In,Ga)Se2 thin films10.1063/1.3190528 ↗
7. Cd-free flexible Cu(In,Ga)Se2 thin film solar cells with ZnS(O,OH) buffer layers on Ti foils10.1143/APEX.2.072201 ↗
8. Technological aspects of flexible CIGS solar cells and modules10.1016/j.solener.2004.04.010 ↗
9. Approaches to flexible CIGS thin-film solar cells10.1016/j.tsf.2004.11.063 ↗
10. W.K. Batchelor, M.E. Beck, R. Huntington, I.L. Repins, A. Rockett, W.N. Shafarman, F.S. Hasoon, J.S. Britt, Substrate and back contact effects in CIGS devices on steel foil, in: Proceedings of the 29th IEEE PVSEC, 2002, pp. 716–719.10.1109/PVSC.2002.1190665 ↗
11. Diffusion barriers for CIGS solar cells on metallic substrates10.1016/S0040-6090(03)00259-1 ↗
12. CIGS thin-film solar cells on steel substrates10.1016/j.tsf.2008.11.016 ↗
13. P. Blosch, A. Chirila, F. Ianezzi, S. Seyrling, P. Rossbach, S. Buecheler, S. Nishiwaki, A.N. Tiwari, Comparative study of different back contact designs for high efficiency CIGS solar cells on stainless steel foils, in: Proceedings of the 26th PVSC, 2011.10.1109/PVSC.2011.6186064 ↗
14. D. Amouzou, P. Guaino, J. Dumont, L. Fourdrinier, J.B. Richir, R. Sporken, F. Masen, Novel high thermal barrier layers for flexible CIGS solar cells on stainless steel substrates, in: Proceedings of the 26th PVSC, 2011.10.1109/PVSC.2011.6186179 ↗
15. 12.8% Efficiency CIGS solar cell on a flexible polymer sheet10.1002/(SICI)1099-159X(199909/10)7:5<393::AID-PIP289>3.0.CO;2-4 ↗
16. Efficiency enhancement of Cu(In,Ga)Se2 solar cells fabricated on flexible polyimide substrates using alkali–silicate glass thin layers10.1143/APEX.1.092303 ↗
17. Na incorporation into Cu(In,Ga)Se2 for high-efficiency flexible solar cells on polymer foils10.1063/1.1857059 ↗
18. Highly efficient Cu(In,Ga)Se2 solar cells on flexible polymer films10.1038/nmat3122 ↗
19. K. Moriwaki, M. Nanguu, S. Yuuya, S. Ishizuka, S. Niki, New-structured metal foil substrates with dielectric layer for monolithically integrated flexible CIGS submodules, in: Proceedings of the 5th WCPEC, 2010, pp. 2858–2861.
20. N. Murakami, K. Moriwaki, M. Nanguu, T. Ohgoh, S. Yuuya, S. Ishizuka, S. Niki, Monolithically integrated CIGS submodules fabricated on new-structured flexible substrates, in: Proceedings of the 37th IEEE Photovoltaic Specialists Conference, 2011, pp. 402–405.10.1109/PVSC.2011.6186199 ↗
21. M. Nomoto, T. Ohgoh, K. Moriwaki, N. Murakami, S. Yuuya, S. Ishizuka, S. Niki, Monolithically integrated CIGS submodules on stainless steel substrates with insulating layer, in: Proceedings of the 21th PVSEC in Fukuoka, 2B-3O-03, 2011.
22. Properties of Cu(In,Ga)Se2:Fe thin films for solar cells10.1557/PROC-865-F14.12 ↗
23. Flexible Cu(In,Ga)Se2 on Al foils and the effects of Al during chemical bath deposition10.1016/j.tsf.2006.12.152 ↗
24. Monolitically integrated flexible Cu(In,Ga)Se2 solar cell submodules10.1016/j.solmat.2010.06.015 ↗
25. CIGS absorbers and processes10.1002/pip.969 ↗