journal article·2014-05

Sodium-doped molybdenum back contact designs for Cu(In,Ga)Se2 solar cells

P. Blösch, S. Nishiwaki, L. Kranz, C.M. Fella, F. Pianezzi, T. Jäger, C. Adelhelm, E. Franzke, S. Buecheler, A.N. Tiwari

Publisher page

Abstract

Abstract The reliable and homogenous addition of Na to the Cu(In,Ga)Se 2 (CIGS) solar cell absorber represents one major challenge for the industrial implementation of the CIGS technology faces. In this study, an alternative Na source from a Na-doped Mo (MoNa) layer is compared to the conventionally used soda-lime glass (SLG) substrate. In particular, the Na out-diffusion mechanism from different MoNa back contacts into the CIGS layer is investigated for different multilayer designs and magnetron sputtering conditions. From the obtained experimental results a Na diffusion model for the MoNa back contact system is developed, which proposes that Na is mainly collected in the MoNa grain boundary region and then diffuses from these grain boundaries towards the CIGS layer. It is demonstrated that with increasing porosity of the MoNa layer the Na diffusion into the CIGS layer is enhanced. In addition, the low activation energy for Na diffusion found for the MoNa back contact proposes that this Na doping technology is suitable for both low and high substrate temperature CIGS processes. For CIGS solar cells with MoNa back contacts, best cell efficiency of 15% was achieved without anti-reflection coating, which exceeded the performance of the reference sample on SLG with standard Mo back contact.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Potassium-induced surface modification of Cu(In,Ga)Se2 thin films for high-efficiency solar cells10.1038/nmat3789 ↗
2. J.E. Granata, J.R. Sites, Quantitative incorporation of sodium in CuInSe2 and Cu(In,Ga)Se2 photovoltaic devices, in: Proceedings of the Conference Record of 26th IEEE Photovoltaic Specialists Conference, 1997, pp. 387–390.
3. D.F. Dawson-Elli, C.B. Moore, R.R. Gay, C.L. Jensen, Substrate influences on CIS device performance, in: Proceedings of the 1st World Conference on Photovoltaic Energy Conversion, 1994, pp. 152–155.10.1109/WCPEC.1994.519830 ↗
4. Influence of substrates on the electrical properties of Cu(In,Ga)Se2 thin films10.1016/0927-0248(95)00105-0 ↗
5. Effects of sodium on polycrystalline Cu(In,Ga)Se2 and its solar cell performance10.1002/(SICI)1521-4095(199801)10:1<31::AID-ADMA31>3.0.CO;2-3 ↗
6. Effects of Na on the electrical and structural properties of CuInSe210.1063/1.370534 ↗
7. Effects of sodium on Cu(In,Ga)Se2-based thin films and solar cells10.1143/JJAP.36.732 ↗
8. Electronic effects of sodium in epitaxial CuIn1−xGaxSe210.1063/1.366365 ↗
9. Effects of NaF coevaporation on structural properties of Cu(In,Ga)Se2 thin films10.1016/S0040-6090(03)00246-3 ↗
10. Sodium-doped molybdenum back contacts for flexible Cu(In,Ga)Se2 solar cells10.1016/j.tsf.2012.10.080 ↗
11. Impact of different Na-incorporating methods on Cu(In,Ga)Se2 thin film solar cells with a low-Na substrate10.1364/AO.49.001662 ↗
12. J.H. Yun, K.H. Kim, B.T. Ahn, K.H. Yoon, Effect of Na-doped Mo/Mo bilayer on CIGS cells and its photovoltaic properties, photovoltaic energy conversion, in: Proceedings of the Conference Record of the 2006 IEEE 4th World Conference, 2006, pp. 509–511.10.1109/WCPEC.2006.279503 ↗
13. CIS module pilot processing applying concurrent rapid selenization and sulfurization of large area thin film precursors10.1016/S0040-6090(03)00249-9 ↗
14. Sputtered molybdenum bilayer back contact for copper indium diselenide-based polycrystalline thin-film solar cells10.1016/0040-6090(94)06462-8 ↗
15. Effect of substrate temperature on the structural and electrical properties of CIGS films based on the one-stage co-evaporation process10.1088/0268-1242/25/5/055007 ↗
16. Sodium incorporation strategies for CIGS growth at different temperatures10.1016/j.tsf.2004.11.071 ↗
17. L.M. Mansfield, I.L. Repins, S. Glynn, M.D. Carducci, D.M. Honecker, J.W. Pankow, M.R. Young, C. DeHart, R. Sundaramoorthy, C.L. Beall, B. To, Sodium-doped molybdenum targets for controllable sodium incorporation in CIGS solar cells, in: Proceedings of the Conference Record of the 37th IEEE Photovoltaic Specialists Conference, PVSC, 2011, pp. 3636–3641.10.1109/PVSC.2011.6185937 ↗
18. Alternative sodium sources for Cu(In,Ga)Se2 thin-film solar cells on flexible substrates10.1016/j.tsf.2011.01.399 ↗
19. Determination of activation barriers for the diffusion of sodium through CIGS thin-film solar cells10.1002/pip.515 ↗
20. Cation diffusion and ionic conductivity in soda-lime silicate glasses10.1039/b502501j ↗
21. The behaviour of Na implanted into Mo thin films during annealing10.1016/S0927-0248(98)00203-7 ↗
22. Investigation of intergrain compounds in sputtered Mo films applied in CuIn1−xGaxSe2-based solar cell10.1016/j.surfcoat.2011.09.030 ↗
23. Optical analysis of the microstructure of a Mo back contact for Cu(In,Ga)Se2 solar cells and its effects on Mo film properties and Na diffusivity10.1016/j.solmat.2011.02.030 ↗
24. H.A. Al-Thani, F.S. Hasoon, M. Young, S. Asher, J.L. Alleman, The effect of Mo back contact on Na out-diffusion and device performance of Mo/Cu(ln,Ga)Se2/CdS/ZnO solar cells, in: Proceedings of the Conference Record of the 29th IEEE Photovoltaic Specialists Conference – PVSC, 2002, pp. 720–723.10.1109/PVSC.2002.1190666 ↗
25. H.A. Al-Thani, M. Young, S. Asher, F.S. Hasoon, Microstructure characterization of Mo back contact used for CIGS based solar cell, in: Proceedings of the Conference Record of the 33rd IEEE Photovoltaic Specialists Conference, PVSC, 2008, pp. 1–4.10.1109/PVSC.2008.4922873 ↗
26. J. Li, S. Glynn, L. Mansfield, M. Young, Y. Yan, M. Contreras, R. Noufi, F.L. Terry Jr., D. Levi. Density profiles in sputtered molybdenum thin films and their effects on sodium diffusion in Cu(InxGa1−x)Se2 photovoltaics, in: Proceedings of the Conference Record of the 37th IEEE Photovoltaic Specialists Conference, PVSC, 2011, pp. 2749–2752.10.1109/PVSC.2011.6186516 ↗
27. E. Franzke, C. Adelhelm, N. Reinfried, H. Köstenbauer, J. Winkler, C. Linke, M. Gorgoi, M. Balden, Molybdenum-based thin films: depth-resolved analysis of the bonding states by synchrotron X-ray photoelectron spectroscopy, in: Proceedings of the 26th European Photovoltaics Solar Energy Conference and Exhibition, 2011.
28. Diffusion barrier properties of molybdenum back contacts for Cu(In,Ga)Se2 solar cells on stainless steel foils10.1063/1.4789616 ↗
29. J.H. Scofield, S. Asher, D. Albin, J. Tuttle, M. Contreras, D. Niles, R. Reedy, A. Tennant, R. Noufi, Sodium diffusion, selenization, and microstructural effects associated with various molybdenum back contact layers for CIS-based solar cells, in: Proceedings of the Conference Record of 24th IEEE Photovoltaic Specialists Conference, PVSC, 1994, pp. 164–167.10.1109/WCPEC.1994.519833 ↗