journal article·2015-12

Thermal cycling effect on mechanical integrity of inverted polymer solar cells

Veerle Balcaen, Nicholas Rolston, Stephanie R. Dupont, Eszter Voroshazi, Reinhold H. Dauskardt

Publisher page

Abstract

Abstract The role of thermal cycling of inverted P3HT:PCBM-based polymer solar cells is reported. We found that thermal cycling between −40 °C and 85 °C up to 200 cycles had no significant effect on solar cell efficiency and mechanical integrity. On the contrary, the solar cells exhibited a slight increase in fracture resistance, similar to that reported for a post-electrode deposition thermal annealing at 85 °C. Gc increased from 2.6 J/m2 for our control solar cells to a sustained maximum value of 4.0 J/m2 after 25 thermal cycles. Surface analysis on the fractured samples revealed the formation of an intermixed layer between P3HT:PCBM and PEDOT:PSS, causing the debond path to change from adhesive between P3HT:PCBM and PEDOT:PSS to meandering through the intermixed layer. A kinetic analysis was used to model the effect of thermal cycling on the Gc values of polymer cells. The model revealed for cycling between −40 °C and 85 °C that 25 cycles are needed to reach the maximum Gc, which is consistent with our experimental results. After 5 thermal cycles, the effects of heating and cooling have little impact on the mechanical stability of polymer solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Polymer-fullerene bulk-heterojunction solar cells10.1002/adma.200801283 ↗
2. Polymer-fullerene bulk-heterojunction solar cells10.1002/adma.200903697 ↗
3. Solar cell efficiency tables (Version 45)10.1002/pip.2573 ↗
4. Controlling interdiffusion, interfacial composition, and adhesion in polymer solar cells10.1002/admi.201400135 ↗
5. Adhesion properties of inverted polymer solar cells: processing and film structure parameters10.1016/j.orgel.2013.02.022 ↗
6. Influence of cathode oxidation via the hole extraction layer in polymer: fullerene solar cells10.1016/j.orgel.2011.01.025 ↗
7. Consensus stability testing protocols for organic photovoltaic materials and devices10.1016/j.solmat.2011.01.036 ↗
8. Augmented double cantilever beam model for studying crack-propagation and arrest10.1007/BF00035958 ↗
9. Characterization of the PEDOT-PSS system by means of X-ray and ultraviolet photoelectron spectroscopy10.1016/S0040-6090(99)00422-8 ↗
10. Interlayer adhesion in roll-to-roll processed flexible inverted polymer solar cells10.1016/j.solmat.2011.10.012 ↗
11. S.R. Dupont, E. Voroshazi, P. Heremans, R.H. Dauskardt, The effect of anneal, solar irradiation and humidity on the adhesion/cohesion properties of P3HT:PCBM based inverted polymer solar cells, in: Proceedings of the 38th Ieee Photovoltaic Specialists Conference (Pvsc), 2012, pp. 3259–3262.10.1109/PVSC.2012.6318272 ↗
12. Morphology and interdiffusion control to improve adhesion and cohesion properties in inverted polymer solar cells10.1016/j.solmat.2014.09.013 ↗
13. Interfacial segregation in polymer/fullerene blend films for photovoltaic devices10.1021/ma100027b ↗
14. Recent progress in polymer solar cells: manipulation of polymer: fullerene morphology and the formation of efficient inverted polymer solar cells10.1002/adma.200802854 ↗
15. P3HT/PCBM bulk heterojunction solar cells: impact of blend composition and 3D morphology on device performance10.1002/adfm.200902247 ↗
16. Morphology evolution via self-organization and lateral and vertical diffusion in polymer: fullerene solar cell blends10.1038/nmat2102 ↗
17. Nanoscale morphology of high-performance polymer solar cells10.1021/nl048120i ↗
18. P3HT/PCBM bulk heterojunction organic photovoltaics: correlating efficiency and morphology10.1021/nl103482n ↗
19. Investigation of annealing effects and film thickness dependence of polymer solar cells based on poly(3-hexylthiophene)10.1063/1.2008386 ↗
20. The consequences of interface mixing on organic photovoltaic device characteristics10.1002/adfm.201002014 ↗
21. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
22. In situ measurement of power conversion efficiency and molecular ordering during thermal annealing in P3HT:PCBM bulk heterojunction solar cells10.1039/c1jm12677f ↗
23. Decohesion kinetics of PEDOT:PSS conducting polymer films10.1002/adfm.201302174 ↗
24. Effect of interchain interactions on the absorption and emission of poly(3-hexylthiophene)10.1103/PhysRevB.67.064203 ↗
25. Vertical stratification and interfacial structure in P3HT:PCBM organic solar cells10.1021/jp104695j ↗
26. Kinetics of phase change I-General theory10.1063/1.1750380 ↗
27. The applicability of Johnson-Mehl-Avrami model in the thermal analysis of the crystallization kinetics of glasses10.1016/0040-6031(95)02466-2 ↗
28. Effects of Thermal Annealing Upon the Morphology of Polymer-Fullerene Blends10.1002/adfm.201000975 ↗