journal article·2023-05

Laser doping selective emitter with thin borosilicate glass layer for n-type TOPCon c-Si solar cells

Dong Ding, Zheren Du, Ronglin Liu, Cheng Quan, Jie Bao, Daxue Du, Zhengping Li, Jia Chen, Wenzhong Shen

Publisher page

Abstract

Boron laser doping selective emitter (LDSE) has attracted much attention in the current mass-production of n -type tunnel oxide passivated contact (TOPCon) crystalline silicon (c-Si) solar cells. However, boron LDSE technology is limited by the low boron concentration of borosilicate glass (BSG) during boron diffusion, as well as the inefficient doping and laser-induced damage. Here, a thinner BSG layer with high boron concentration has been achieved by adjusting the boron diffusion conditions, which overcomes the insufficient diffusion dynamics caused by the low diffusion and segregation coefficients of boron atoms to improve the surface passivation and promote the laser doping. We have demonstrated that high-temperature annealing has a better repair on laser-induced damage compared with wet etching back due to the surface tension and internal stress after solidification of the silicon molten pool. More importantly, the synergistic effect of high-temperature annealing and wet etching back results in much better results, together with good compatibility with the subsequent cell production processes without increasing production costs. The influence of front emitter parameters has been further quantified theoretically to provide a meaningful guidance for the development of TOPCon c-Si solar cells with front LDSE.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Integrated Circuits and Semiconductor Failure Analysis · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Reassessment of the limiting efficiency for crystalline silicon solar cells10.1109/JPHOTOV.2013.2270351 ↗
2. Passivated rear contacts for high-efficiency n-type Si solar cells providing high interface passivation quality and excellent transport characteristics10.1016/j.solmat.2013.09.017 ↗
3. n-Type Si solar cells with passivating electron contact: identifying sources for efficiency limitations by wafer thickness and resistivity variation10.1016/j.solmat.2017.05.042 ↗
4. 26.1%‐efficient POLO‐IBC cells: quantification of electrical and optical loss mechanisms10.1002/pip.3098 ↗
5. Highlights of mainstream solar cell efficiencies in 202110.1007/s11708-022-0816-x ↗
6. Solar cell efficiency tables (version 59)10.1002/pip.3506 ↗
7. Technology evolution of the photovoltaic industry: learning from history and recent progress
8. 2022
9. Metal contact recombination in monoPoly™ solar cells with screen-printed & fire-through contacts10.1016/j.solmat.2018.12.026 ↗
10. Charge carrier transport mechanisms of passivating contacts studied by temperature-dependent J-V measurements10.1016/j.solmat.2018.01.008 ↗
11. 2022
12. An industrially viable TOPCon structure with both ultra-thin SiOx and n+-poly-Si processed by PECVD for p-type c-Si solar cells10.1016/j.solmat.2019.109926 ↗
13. Parasitic absorption in polycrystalline Si-layers for carrier-selective front junctions10.1016/j.egypro.2016.07.057 ↗
14. Application of phosphorus-doped polysilicon-based full-area passivating contact on the front textured surface of p-type silicon
15. 23% efficient p-type crystalline silicon solar cells with hole-selective passivating contacts based on physical vapor deposition of doped silicon films10.1063/1.5037610 ↗
16. High efficiency n-type silicon solar cells with passivating contacts based on PECVD silicon films doped by phosphorus diffusion10.1016/j.solmat.2019.01.005 ↗
17. Tunnel oxide passivating electron contacts as full-area rear emitter of high-efficiency p-type silicon solar cells10.1002/pip.2960 ↗
18. Glunz · 2015 · 259
19. High-efficiency selective boron emitter formed by wet chemical etch-back for n-type screen-printed Si solar cells10.1063/1.4973626 ↗
20. Modeling the potential of screen printed front junction CZ silicon solar cell with tunnel oxide passivated back contact10.1002/pip.2809 ↗
21. Laser induced defects in laser doped solar cells10.1002/pip.1043 ↗
22. Modeling of contact geometry and dopant profile during laser silicon interaction
23. Deep junction laser doping for contacting buried layers in silicon solar cells10.1016/j.solmat.2013.02.011 ↗
24. Segregation and transport coefficients of impurities at the Si/SiO2 interface10.1063/1.338089 ↗
25. McIntosh · 2013 · 1672
26. Characterization of laser-doped localized p-n junctions for high efficiency silicon solar cells10.1109/TED.2014.2318714 ↗
27. Predictive simulation framework for boron diffused p+ layer optimization: sensitivity analysis of boron tube diffusion process parameters of industrial n-type silicon wafer solar cells10.1016/j.solmat.2018.09.019 ↗
28. Effect of boron concentration on recombination at the p-Si–Al2O3 interface10.1063/1.4867643 ↗
29. Understanding the impact of the doping profiles on selective emitter solar cell by two-dimensional numerical simulation10.1109/JPHOTOV.2012.2214376 ↗
30. Deep junction laser doping for contacting buried layers in silicon solar cells10.1016/j.solmat.2013.02.011 ↗
31. Etch rate characterization of boron-implanted thermally grown SiO210.1149/1.2403304 ↗
32. Defect formation in silicon during laser doping10.1109/JPHOTOV.2011.2173298 ↗
33. Green-laser-doped selective emitters with separate BBr3 diffusion processes for high-efficiency n-type silicon solar cells10.1016/j.solmat.2020.110462 ↗