journal article·2022-08Open access

Thermal conductivity of sugar alcohols

Ari Seppälä, Konsta Turunen, Maryam Roza Yazdani

Abstract

During the past decade sugar alcohols have been extensively studied for thermal storage purposes. One of the recent focuses of research has been in improving their heat charge and discharge rate by enhancing the thermal conductivity with different types of additives. However, the current literature shows a vast discrepancy in measured values of sugar alcohols. This work presents an experimental study on thermal conductivity of seven sugar alcohols. The aim is to find out the reason for the discrepancy of literature values for erythritol, mannitol and xylitol, and to present new reference data for galacticol, myo-inositol, maltitol and sorbitol. We study the impact of material preparation method, raw material grade and sensor contact on the crystalline structure and the conductivity. The crystalline structure was inspected with optical and scanning electron microscopy and X-ray diffraction, and melting properties with differential scanning calorimetry. We found that different polymorphs, grain structure and crystallite sizes can be obtained by different preparation methods. This caused the conductivity of mannitol, galacticol and myo-inositol to vary by tens of percentages. Crystallization temperatures of xylitol and erythritol were found to affect their grain size but had only a minor effect on the conductivity. Overall, the conductivities of solid phase sugar alcohols were found to be within the upper range of the previous literature; based on the methods of this work, we did not find any evidence for the low and intermediate values for erythritol, xylitol and mannitol. Due to the high amorphous content of maltitol and sorbitol their conductivity was substantially lower than that of the other sugar alcohols. Thermal conductivity of liquid phases was found to accurately follow a linear relationship with the molar mass for sugar alcohols with carbon number between 4 and 6.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Food Chemistry and Fat Analysis · Phase Change Materials Research · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Supercooling suppression and thermal behavior improvement of erythritol as phase change material for thermal energy storage10.1016/j.solmat.2017.06.027 ↗
2. Thermal performance of galactitol/mannitol eutectic mixture/expanded graphite composite as phase change material for thermal energy harvesting10.1016/j.est.2020.101997 ↗
3. Eutectic mixtures of sugar alcohols for thermal energy storage in the 50-90°C temperature range10.1016/j.solmat.2014.11.050 ↗
4. Synthesis and properties of inositol nanocapsules10.3390/ma14195481 ↗
5. A eutectic mixture of galactitol and mannitol as a phase change material for latent heat storage10.1016/j.enconman.2015.06.013 ↗
6. Novel microstructured polyol-polystyrene composites for seasonal heat storage10.1016/j.apenergy.2016.03.023 ↗
7. Cold-crystallization of polyelectrolyte absorbed polyol for long-term thermal energy storage10.1016/j.solmat.2018.02.013 ↗
8. Cold-crystallizing erythritol-polyelectrolyte: scaling up reliable long-term heat storage material10.1016/j.apenergy.2020.114890 ↗
9. Ionic cross-linked polyvinyl alcohol tunes vitrification and cold-crystallization of sugar alcohol for long-term thermal energy storage10.1039/D0GC01427C ↗
10. Exceptional cold-crystallization kinetics of erythritol-polyelectrolyte enables long-term thermal energy storage10.1016/j.solmat.2021.111273 ↗
11. Experiments on thermal performance of erythritol/expanded graphite in a direct contact thermal energy storage container10.1016/j.applthermaleng.2016.11.073 ↗
12. A comprehensive review on latent heat and thermal conductivity of nanoparticle dispersed phase change material for low-temperature applications10.1016/j.ensm.2019.07.031 ↗
13. Review on thermal conductivity enhancement, thermal properties and applications of phase change materials in thermal energy storage10.1016/j.rser.2017.10.002 ↗
14. Thermal conductivity measurement of erythritol, xylitol, and their blends for phase change material design: a methodological study10.1002/er.4403 ↗
15. Thermophysical characterization of MgCl2·6H2O, xylitol and erythritol as phase change materials (PCM) for latent heat thermal energy storage (LHTES)10.3390/ma10040444 ↗
16. Experimental and in silico characterization of xylitol as seasonal heat storage10.1016/j.fluid.2016.12.020 ↗
17. Characterization of different sugar alcohols as phase change materials for thermal energy storage applications10.1016/j.solmat.2016.10.009 ↗
18. Topology optimized phase change material integrated heat sinks and validation
19. Effect of adding alumina nanoparticle in D-Mannitol for reversible solar thermoelectric power generation: an experimental study10.1016/j.solmat.2020.110781 ↗
20. Development of an industrial heat storage using high-temperature PCM-graphite composites
21. D-mannitol@silica/graphene oxide nanoencapsulated phase change material with high phase change properties and thermal reliability10.1016/j.apenergy.2020.115020 ↗
22. Preparation and thermal energy storage properties of d-Mannitol/expanded graphite composite phase change material10.1016/j.solmat.2016.06.003 ↗
23. Development of renewable biomass-derived carbonaceous Aerogel/Mannitol phase-change composites for high thermal-energy-release efficiency and shape stabilization10.1021/acsaem.0c02864 ↗
24. A novel volumetric absorber integrated with low-cost D-Mannitol and acetylene-black nanoparticles for solar-thermal-electricity generation10.1016/j.solmat.2019.110366 ↗
25. Heat transfer characteristics of latent heat thermal energy storage for floating concentrate solar power systems10.1088/1757-899X/1052/1/012007 ↗
26. The effects of modified carbon nanotubes on the thermal properties of erythritol as phase change materials10.1016/j.enconman.2017.11.072 ↗
27. Evaluation and comparison of erythritol-based composites with addition of expanded graphite and carbon nanotubes10.1016/j.apenergy.2017.08.046 ↗
28. Experimental investigation and theoretical analysis on a mid-temperature solar collector/storage system with composite PCM10.1016/j.applthermaleng.2017.06.002 ↗
29. Thermal characterization of erythritol/expanded graphite composites for high thermal storage capacity10.1016/j.carbon.2013.09.053 ↗
30. Preparation of erythritol-graphite foam phase change composite with enhanced thermal conductivity for thermal energy storage applications10.1016/j.carbon.2015.06.075 ↗
31. Characterization and stability study of a form-stable erythritol/expanded graphite composite phase change material for thermal energy storage10.1016/j.renene.2018.12.107 ↗
32. The graphite foam/erythritol composites with ultrahigh thermal conductivity for medium temperature applications10.1016/j.solmat.2021.111135 ↗
33. Hydrophilic modification of carbon nanotube to prepare a novel porous copper network-carbon nanotube/erythritol composite phase change material10.1080/09276440.2020.1740520 ↗
34. A high-thermal-conductivity, high-durability phase-change composite using a carbon fibre sheet as a supporting matrix10.1016/j.apenergy.2020.114685 ↗
35. Experimental investigation on thermal behavior of graphene dispersed erythritol PCM in a shell and helical tube latent energy storage system10.1016/j.ijthermalsci.2020.106446 ↗
36. J.-L.Z. Ni Tan, Ting Xie, Yang Feng, Ping Hu, Qi Li, Liu-Mo Jiang, Wen-Bo Zeng, Preparation and characterization of erythritol/sepiolite/exfoliated graphite nanoplatelets form-stable phase change material with high thermal conductivity and suppressed supercooling, Sol. Energy Mater. Sol. Cells. 217 (n.d.) 110726.10.1016/j.solmat.2020.110726 ↗
37. Experimental study on the melting and solidification behavior of erythritol in a vertical shell-and-tube latent heat thermal storage unit10.1016/j.ijheatmasstransfer.2016.03.125 ↗
38. Study on the improvement of supercooling and thermal properties of erythritol-based phase change energy storage materials10.1016/j.renene.2021.04.125 ↗
39. Preparation and thermal properties of short carbon fibers/erythritol phase change materials10.1016/j.enconman.2017.01.023 ↗
40. Continuous carbon nanotube–ultrathin graphite hybrid foams for increased thermal conductivity and suppressed subcooling in composite phase change materials10.1021/acsnano.5b02917 ↗
41. Enhanced thermal conductivity of phase change materials with ultrathin-graphite foams for thermal energy storage10.1039/C3EE42573H ↗
42. Atomistic insights into the effects of hydrogen bonds on the melting process and heat conduction of erythritol as a promising latent heat storage material10.1016/j.ijthermalsci.2019.106103 ↗
43. Stability of sugar alcohols as PCM for thermal energy storage10.1016/j.solmat.2014.03.020 ↗
44. Cusat_Durgesh_2016_Myo-Inositol.pdf
45. Thermoanalytical studies on phases of D-mannitol10.1016/0040-6031(93)80051-B ↗
46. Effect of d-mannitol polymorphism in its thermal energy storage capacity when it is used as PCM10.1016/j.solener.2013.05.023 ↗
47. The effect of additives on the speed of the crystallization front of xylitol with various degrees of supercooling10.1016/j.expthermflusci.2009.11.005 ↗
48. Influence of crystallite size on the thermal conductivity in BaTiO3 nanoceramics10.1063/1.2711195 ↗
49. Cellulose nanofibrils endow phase-change polyethylene glycol with form control and solid-to-gel transition for thermal energy storage10.1021/acsami.0c18623 ↗