journal article·2020-08

The effect of laser surface melting of stainless steel grade AISI 316L welded joint on its corrosion performance in molten Solar Salt

Franco Vilchez, Fabiola Pineda, Magdalena Walczak, Jorge Ramos-Grez

Publisher page

Abstract

Abstract Whereas there are numerous studies dedicated to the corrosion performance of different grades of austenitic stainless steel (ASS) exposed to the conditions of thermal storage of solar energy, there is no data concerning the resistance of the welding joints, which are unavoidable when fabricating large structures. Because the microstructure of a weld bead can significantly differ from that of the base metal and the heat-affected zone (HAZ), increased susceptibility to localized corrosion can be expected. This work explores corrosion resistance of a welding joint of ASS grade 316 L when exposed to molten Solar Salt (60% NaNO3 – 40% KNO3) at 565 °C. Further, the application of laser surface melting (LSM) is proposed as a method to modify the microstructure of the weld bead and HAZ to enhance the corrosion resistance of the joint. Isothermal exposure to molten Solar Salt was implemented in static immersion, in the presence of atmospheric air, for the duration of up to 1008 h (6 weeks). The gravimetric analysis revealed a corrosion rate of 54 μm/y at the weld joint, which is at least twice as high as that expected for the same non-welded alloy in similar conditions. Although LSM reduces the rate of uniform corrosion in the first 2 weeks, there is no long term benefit in this regard. However, the onset of localized corrosion of the intergranular type is effectively prevented, presenting a potential approach for diminishing the risk of catastrophic failure of HAZ by fracture.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Welding Techniques and Residual Stresses · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Mainstreaming commercial CSP systems: a technology review10.1016/j.renene.2019.03.049 ↗
2. Ren21
3. Heat transfer fluids for concentrating solar power systems - a review10.1016/j.apenergy.2015.01.125 ↗
4. Empirically observed learning rates for concentrating solar power and their responses to regime change10.1038/nenergy.2017.94 ↗
5. Analysis of CSP plants for the definition of energy policies: the influence on electricity cost of solar multiples, capacity factors and energy storage10.1016/j.enpol.2010.06.009 ↗
6. Materials corrosion for thermal energy storage systems in concentrated solar power plants10.1016/j.rser.2018.01.010 ↗
7. Molten salt corrosion mechanisms of nitrate based thermal energy storage materials for concentrated solar power plants: a review10.1016/j.solmat.2019.02.012 ↗
8. Recommended values for the thermal conductivity of molten salts between the melting and boiling points10.1016/j.solmat.2014.03.028 ↗
9. A simple method for the inhibition of the corrosion of carbon steel by molten nitrate salt for thermal storage in concentrating solar power applications10.1038/s41529-018-0055-0 ↗
10. High-temperature corrosion performance of austenitic stainless steels type AISI 316L and AISI 321H, in molten Solar Salt10.1016/j.solener.2018.11.019 ↗
11. Corrosion behavior of stainless and low-chromium steels and IN625 in molten nitrate salts at 600 °c10.1016/j.solmat.2015.08.011 ↗
12. Impact of Solar Salt aging on corrosion of martensitic and austenitic steel for concentrating solar power plants10.1016/j.solmat.2019.110162 ↗
13. Two-tank molten salts thermal energy storage system for solar power plants at pilot plant scale: lessons learnt and recommendations for its design, start-up and operation10.1016/j.renene.2018.01.026 ↗
14. Molten salt corrosion of stainless steels and low-Cr steel in CSP plants10.1007/s11085-012-9310-x ↗
15. Comparison of corrosion performance of grade 316 and grade 347H stainless steels in molten nitrate salt10.1063/1.4949258 ↗
16. Lundin · 1988 · 67
17. Ferrite-Fissuring Relationship in Austenitic Stainless Steel Weld Metals
18. Computational thermodynamics in ferrite content prediction of austenitic stainless steel weldments10.1007/s40194-018-00685-x ↗
19. Bayesian neural network analysis of ferrite number in stainless steel welds10.1179/136217104225017026 ↗
20. Improved ferrite number prediction model that accounts for cooling rate effects — Part 1 : model development
21. Microstructure and corrosion behavior of the heat affected zone of a stainless steel 308L-316L weld joint10.1016/j.jmst.2017.12.016 ↗
22. Stress corrosion cracking in the heat affected zone of a stainless steel 308L-316L weld joint in primary water10.1016/j.corsci.2016.02.030 ↗
23. Effect of gas tungsten arc welding parameters on the corrosion resistance and the residual stress of heat affected zone
24. Intergranular corrosion of welded joints of austenitic stainless steels studied by using an electrochemical minicell10.1016/j.corsci.2008.06.016 ↗
25. Effect of laser surface melting on intergranular corrosion behaviour of aged austenitic and duplex stainless steels10.1016/j.corsci.2011.01.048 ↗
26. Stress corrosion cracking sealing in overlaying of Inconel 182 by laser surface melting10.1016/j.jmatprotec.2005.11.037 ↗
27. Suresh · 2017
28. Improving intergranular corrosion resistance of sensitized type 316 austenitic stainless steel by laser surface melting10.1007/BF02652387 ↗
29. Pitting corrosion behaviour of large area laser surface treated 304L stainless-steel10.1016/j.tsf.2003.11.094 ↗
30. ImageJ2: ImageJ for the next generation of scientific image data10.1186/s12859-017-1934-z ↗
31. Effect of cold deformation on the electrochemical behaviour of 304L stainless steel in contaminated sulfuric acid environment Applied Surface Science Effect of cold deformation on the electrochemical behaviour of 304L stainless steel in contaminated sulfur10.1016/j.apsusc.2017.07.057 ↗
32. Morphologies, microstructures, and mechanical properties of samples produced using laser metal deposition with 316L stainless steel wire10.1016/j.optlaseng.2017.02.008 ↗
33. Effect of heat input on microstructure and mechanical properties of dissimilar joints of AISI 316l steel and API X70 high-strength low-alloy steel10.1016/S1006-706X(18)30024-4 ↗
34. Microstructure, micro-hardness and impact toughness of welded austenitic stainless steel 316L10.1007/s12666-018-1362-4 ↗
35. Laser surface treatment for enhancing intergranular corrosion resistance of AISI type 304 stainless steel10.5006/1.3278443 ↗
36. Reassessment of the effects of laser surface melting on IGC of SUS 30410.1016/j.msea.2007.03.103 ↗
37. Multi-pass arc welding techniques of 12 mm thick super-duplex stainless steel10.1016/j.jmatprotec.2019.03.031 ↗
38. Pulsed Nd:YAG laser welding of 17-4 PH stainless steel: microstructure, mechanical properties, and weldability investigation10.1016/j.optlastec.2019.105651 ↗
39. Investigations on induced residual stresses, mechanical and metallurgical properties of CO2 laser beam and pulse current gas tungsten arc welded SMO 25410.1016/j.jmapro.2019.05.044 ↗
40. Characterization of the absorptance of laser irradiated steel sheets10.2351/1.4918975 ↗
41. High temperature corrosion in molten solar salt: the role of chloride impurities10.1002/maco.201609300 ↗
42. corrosion resistance of stainless steels during thermal cycling in alkali nitrate
43. Corrosion of stainless and carbon steels in molten mixtures of industrial nitrates
44. Corrosion of iron stainless steels in molten nitrate salt10.1016/j.egypro.2014.03.095 ↗