journal article·2020-06

Green-laser-doped selective emitters with separate BBr3 diffusion processes for high-efficiency n-type silicon solar cells

Wenjie Lin, Daming chen, Chengfa Liu, Yao Wang, Yu He, Yang Zou, Ling Yuan, Jian Gong, Yang Yang, Zhiqiang Feng, Zongtao Liu, Zhiming Chen, Qi Xie, Zongcun Liang, Yifeng Chen, Hui Shen

Publisher page

Abstract

Abstract Laser-doped boron selective emitters are an ideal candidate for enabling less emitter recombination, lower contact resistance and better blue response of efficient n-type silicon solar cells. However, the low boron concentration of the borosilicate glasses formed during boron diffusion processes and the implementation of ultraviolet lasers have hindered the commercialization of laser-doped boron selective emitters. In this contribution, separate BBr3 diffusion processes for green-laser-doped selective emitters are demonstrated. Laser doping processes were conducted between (1) borosilicate glass deposition and boron driving in and (2) post-oxidation, achieving the optimized laser doped selective emitter with the Rsheet,p+/Rsheet,p++ of 95.0 Ω/□/54.3 Ω/□, accompanying with the p+ profile of Nmax
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Silicon Nanostructures and Photoluminescence

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Passivating contacts for crystalline silicon solar cells
2. Passivating contacts for crystalline silicon solar cells: from concepts and materials to prospects10.1109/JPHOTOV.2018.2797106 ↗
3. Carrier population control and surface passivation in solar cells10.1016/j.solmat.2018.04.026 ↗
4. 24.7% record efficiency HIT solar cell on thin silicon wafer10.1109/JPHOTOV.2013.2282737 ↗
5. Exceeding conversion efficiency of 26% by heterojunction interdigitated back contact solar cell with thin film Si technology10.1016/j.solmat.2017.06.024 ↗
6. n-Type Si solar cells with passivating electron contact: identifying sources for efficiency limitations by wafer thickness and resistivity variation10.1016/j.solmat.2017.05.042 ↗
7. Mass production of industrial tunnel oxide passivated contacts (i‐TOPCon) silicon solar cells with average efficiency over 23% and modules over 345 W10.1002/pip.3180 ↗
8. 24.58% total area efficiency of screen-printed, large area industrial silicon solar cells with the tunnel oxide passivated contacts (i-TOPCon) design10.1016/j.solmat.2019.110258 ↗
9. Laser contact openings for local poly-Si-metal contacts enabling 26.1%-efficient POLO-IBC solar cells10.1016/j.solmat.2018.06.020 ↗
10. Boron laser doping using spin-on dopant for textured crystalline silicon solar cell10.7567/JJAP.54.066502 ↗
11. BBr3 diffusion with second deposition for laser-doped selective emitters from borosilicate glass10.1016/j.solmat.2018.06.042 ↗
12. Selective boron emitters using laser-induced forward transfer versus laser doping from borosilicate glass10.1109/JPHOTOV.2017.2717338 ↗
13. A laser induced forward transfer process for selective boron emitters10.1016/j.solmat.2016.12.026 ↗
14. Advanced BBr3 diffusion with second deposition step for selective emitter formation by laser doping10.1002/pssr.201700442 ↗
15. High-efficiency selective boron emitter formed by wet chemical etch-back for n-type screen-printed Si solar cells10.1063/1.4973626 ↗
16. High-efficiency n-type silicon PERT bifacial solar cells with selective emitters and poly-Si based passivating contacts10.1016/j.solener.2019.09.085 ↗
17. Screen printed, large area bifacial selective emitter N-PERT cells using single-step implantation through laser patterned dielectric layer
18. Impact of boron doping profiles on the specific contact resistance of screen printed Ag–Al contacts on silicon10.1016/j.solmat.2015.04.039 ↗
19. Towards understanding the characteristics of Ag–Al spiking on boron-doped silicon for solar cells10.1016/j.solmat.2015.11.032 ↗
20. Predictive simulation framework for boron diffused p+ layer optimization: sensitivity analysis of boron tube diffusion process parameters of industrial n-type silicon wafer solar cells10.1016/j.solmat.2018.09.019 ↗
21. Novel technique for fabrication of n-type crystalline silicon selective emitter for solar cell processing10.1088/2053-1591/ab18ee ↗
22. Selective boron diffusion without masking layer using boric acid for solar cell emitter formation10.1007/s10854-017-6856-z ↗
23. Moehlecke · 1994
24. Etch-back of p+ structures for selective boron emitters in n-type c-Si solar cells10.1016/j.egypro.2014.08.086 ↗
25. Development of n-type selective emitter silicon solar cells by laser doping using boron-doped silicon paste10.1016/j.egypro.2016.07.122 ↗
26. Driving-in effect and gettering degradation induced by laser doping using borosilicate glass as dopant source10.1007/s10854-019-01004-w ↗
27. Laser doping from borosilicate glass for metallization of boron emitters
28. Laser-induced boron diffusion for selective emitter n-type solar cells
29. Development and characterization of multifunctional PassDop layers for local p+-laser doping10.1016/j.egypro.2017.09.278 ↗
30. Laser doping of boron-doped Si paste for high-efficiency silicon solar cells10.7567/JJAP.54.08KD06 ↗
31. Selective laser doping from boron silicate glass10.1016/j.egypro.2012.07.093 ↗
32. Analysis of laser doping of silicon using different boron dopant sources10.1016/j.apsusc.2014.01.071 ↗
33. Investigation of contact resistivity on a laser doped boron emitter from CVD doping layers10.1063/1.5123840 ↗
34. Comparison of laser-doped emitters from as-deposited and thermally diffused APCVD doping glasses on silicon substrates10.1063/1.5123865 ↗
35. Laser doping from as-deposited CVD layers for high-efficiency crystalline silicon solar cells10.1063/1.5123863 ↗
36. Laser doped boron emitters with sputtered precursor
37. Full area laser doped boron emitter silicon solar cells
38. Surface passivation of boron diffused emitters for high efficiency solar cells
39. Measurement of the emitter saturation current by a contactless photoconductivity decay method