journal article·2019-06

Liquid assisted grain growth in solution processed Cu(In,Ga)(S,Se)2

Steven McLeod, Essam Alruqobah, Rakesh Agrawal

Publisher page

Abstract

Abstract Many solution based methods of fabricating thin film Cu(In,Ga)Se2 solar cell absorbers can be described as a two step process, consisting of initial precursor deposition followed by high temperature post processing. This post processing step is termed “selenization” when the sample is treated in a selenium-rich environment, and is responsible for transforming the nanocrystalline or amorphous precursor layer into the large crystal grains that are necessary for high efficiency solar cells. Here we study the selenization of nanoparticle Cu(In,Ga)S2 precursor layers by a rapid thermal processing method, and develop a liquid assisted growth model to explain how large grain Cu(In,Ga)(S,Se)2 crystals nucleate and grow. We find that processing with saturated selenium, achieved by maintaining a higher temperature for the selenium source than the sample, is a necessary but not sufficient condition for grain growth of a 1–2 μm thick Cu(In,Ga)(S,Se)2 film. An additional necessary condition is an external supply of Na, without which grain growth of films on soda-lime glass stagnates at about 400 nm thickness, with the remainder of the film consisting of a bottom layer of fine grains. This stagnation of grain growth is hypothesized to be caused by diffusion limitations of Cu, In and Ga containing species from the coarsened selenized particles in the fine grain layer as well as accumulation of carbon left behind by the solution processing method which is rejected during grain growth. We find that deposition of a NaF layer on the nanoparticle precursor film followed by selenization at temperatures greater than 534 °C under a saturated selenium atmosphere results in large surface grains that span the thickness of the film, with only a thin bottom small grain layer primarily composed of carbon and selenium. Grain growth prior to stagnation is well described by a normal grain growth model, and our kinetic study yielded an estimated rate constant activation energy of 126.1 kJ/mol. Attempting to grow grains beyond the stagnation point results in abnormal grain growth. We develop a liquid assisted grain growth model to explain these observations.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. New world record Cu(In,Ga)(Se,S)2 thin film solar cell efficiency beyond 22%
2. Effects of heavy alkali elements in Cu(In,Ga)Se2 solar cells with efficiencies up to 22.6%10.1002/pssr.201600199 ↗
3. High efficiency solution-processed thin-film Cu(In,Ga)(Se,S)2 solar cells10.1039/C6EE02352E ↗
4. Synthesis and characterization of 15% efficient CIGSSe solar cells from nanoparticle inks10.1002/pip.2588 ↗
5. Sulfide nanocrystal inks for dense Cu(In1-xGax)(S1-ySey)2 absorber films and their photovoltaic performance10.1021/nl901538w ↗
6. Thin film deposition methods for CuInSe2 solar cells10.1080/10408430590918341 ↗
7. Band-gap engineering in Cu(In,Ga)Se2 thin films grown from (In,Ga)2Se3 precursors10.1016/0927-0248(95)00122-0 ↗
8. High quality baseline for high efficiency CIGS
9. Progress towards marketable earth-abundant chalcogenide solar cells10.1016/j.tsf.2010.12.225 ↗
10. Morphology of CIGS thin films deposited by single-stage process and three-stage process at low temperature10.1007/s11801-013-3130-3 ↗
11. Solution-deposited pure selenide CIGSe solar cells from elemental Cu10.1039/C5TA05300E ↗
12. Molecular-ink route to 13.0% efficient low-bandgap CuIn(S,Se)2 and 14.7% efficient Cu(In,Ga)(S,Se)2 solar cells10.1039/C5EE02870A ↗
13. Influence of composition on the performance of sintered Cu(In,Ga)Se2 nanocrystal thin-film photovoltaic devices10.1002/cssc.201200677 ↗
14. Low-cost CIGS solar cells by paste coating and selenization10.1016/j.tsf.2004.11.007 ↗
15. Liquid-selenium-enhanced grain growth of nanoparticle precursor layers for CuInSe2 solar cell absorbers10.1002/pip.2529 ↗
16. High efficiency thin-film Cu(In,Ga)Se2-based photovoltaic devices: progress towards a universal approach to absorber fabrication
17. A model for the successful growth of polycrystalline films of CuInSe2 by multisource physical vacuum evaporation10.1002/adma.19930050209 ↗
18. Controlled grain growth for high performance nanoparticle-based kesterite solar cells10.1021/acs.chemmater.6b02733 ↗
19. Structure evolution during processing of polycrystalline films10.1146/annurev.matsci.30.1.159 ↗
20. Ink formulation and low-temperature incorporation of sodium to yield 12% efficient Cu(In,Ga)(S,Se)2 solar cells from sulfide nanocrystal inks10.1002/pip.2200 ↗
22. Grain growth in thin films10.1146/annurev.ms.20.080190.001333 ↗
23. Grain growth studies of thin Cu(In,Ga)Se2 films10.1016/j.jcrysgro.2004.01.020 ↗
24. Reaction kinetics of α-CuInSe2 formation from an In2Se3/CuSe bilayer precursor film10.1016/j.jpcs.2005.09.074 ↗
25. NIH Image to ImageJ: 25 years of image analysis10.1038/nmeth.2089 ↗
26. R Core Team · 2017
27. Deducing growth mechanisms for minerals from the shapes of crystal size distributions10.2475/ajs.298.6.499 ↗
28. On the theory of normal and abnormal grain growth10.1016/0001-6160(65)90200-2 ↗
29. Kinetics of normal grain growth depending on the size distribution of small grains10.2320/matertrans.44.2239 ↗
30. TEM annealing study of normal grain growth in silver thin films10.1016/S0040-6090(00)01570-4 ↗
31. Grain growth kinetics of SnO2 nanocrystals synthesized by precipitation method10.1007/s11595-010-0122-z ↗
32. Structure, chemistry, and growth mechanisms of photovoltaic quality thin-film Cu(In,Ga)Se2 grown from a mixed-phase precursor10.1063/1.359362 ↗
33. Effects of Na on the growth of Cu(In, Ga)Se2 thin films and solar cells
34. Rudmann · 2004
35. Role of sodium in the control of defect structures in CIS solar cells
36. The effect of NaF on Cu(In,Ga)Se2 thin film solar cells10.1016/S0927-0248(99)00089-6 ↗
37. The electronic effects of point defects in Cu(InxGa1-x)Se2 devices10.1063/1.57960 ↗
38. Influence of sodium on the growth of polycrystalline Cu(In,Ga)Se2 thin films10.1016/S0040-6090(99)00777-4 ↗
39. The surfactant effect in semiconductor thin film growth10.1016/S0081-1947(08)60249-0 ↗
40. A hybrid ink of binary copper sulfide nanoparticles and indium precursor solution for a dense CuInSe2 absorber thin film and its photovoltaic performance10.1039/c2jm32624h ↗
41. Microstructure evolution during selenization of Cu2ZnSnS4 colloidal nanocrystal coatings10.1021/acs.chemmater.5b02462 ↗
42. Influence of ligands on the formation of kesterite thin films for solar cells: a comparative study10.1002/cssc.201600063 ↗
43. Solution-processed Cu(In,Ga)(S,Se)2 absorber yielding a 15.2% efficient solar cell10.1002/pip.1253 ↗