journal article·2019-06Open access

Exploring co-sputtering of ZnO:Al and SiO2 for efficient electron-selective contacts on silicon solar cells

Sihua Zhong, Monica Morales-Masis, Mathias Mews, Lars Korte, Quentin Jeangros, Weiliang Wu, Mathieu Boccard, Christophe Ballif

Abstract

In recent years, considerable efforts have been devoted to developing novel electron-selective materials for crystalline Si (c-Si) solar cells with the attempts to simplify the fabrication process and improve efficiency. In this study, ZnO:Al (AZO) is co-sputtered with SiO2 to form AZO:SiO2 films with different SiO2 content. These nanometer-scale films, deposited on top of thin intrinsic hydrogenated amorphous silicon films and capped with low-work-function metal (such as Al and Mg), are demonstrated to function effectively as electron-selective contacts in c-Si solar cells. On the one hand, AZO:SiO2 plays an important role in such electron-selective contact and its thickness is a critical parameter, thickness of 2 nm showing the best. On the other hand, at the optimal thickness of AZO:SiO2, the open circuit voltage (VOC) of the solar cells is found to be relatively insensitive to either the work function or the band gap of AZO:SiO2. Whereas, regarding the fill factor (FF), AZO without SiO2 content exhibits to be the optimal choice. By using AZO/Al as electron-selective contact, we successfully realize a 19.5%-efficient solar cell with VOC over 700 mV and FF around 75%, which is the best result among c-Si solar cells using ZnO as electron-selective contact. Also, this work implies that efficient carrier-selective film can be made by magnetron sputtering method.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Silicon Nanostructures and Photoluminescence

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Impact of carrier recombination on fill factor for large area heterojunction crystalline silicon solar cell with 25. 1% efficiency10.1063/1.4937224 ↗
2. Exceeding conversion efficiency of 26% by heterojunction interdigitated back contact solar cell with thin film Si technology10.1016/j.solmat.2017.06.024 ↗
3. Improvement of the SiOx passivation layer for high-efficiency Si/PEDOT:PSS heterojunction solar cells10.1021/am503949g ↗
4. Silicon heterojunction solar cells with electron selective TiOx contact10.1016/j.solmat.2016.01.020 ↗
5. High-performance TiO2-based electron-selective contacts for crystalline silicon solar cells10.1002/adma.201600926 ↗
6. Conductive and stable magnesium oxide electron-selective contacts for efficient silicon solar cells10.1002/aenm.201601863 ↗
7. 22.5% efficient silicon heterojunction solar cell with molybdenum oxide hole collector10.1063/1.4928747 ↗
8. Efficient silicon solar cells with dopant-free asymmetric heterocontacts10.1038/nenergy.2015.31 ↗
9. Magnesium fluoride electron-selective contacts for crystalline silicon solar cells10.1021/acsami.6b03599 ↗
10. Tantalum nitride electron-selective contact for crystalline silicon solar cells10.1002/aenm.201800608 ↗
11. Tantalum oxide electron-selective heterocontacts for silicon photovoltaics and photoelectrochemical water reduction10.1021/acsenergylett.7b01153 ↗
12. Temperature and humidity stable alkali/alkaline-earth metal carbonates as electron heterocontacts for silicon photovoltaics10.1002/aenm.201800743 ↗
13. Stable dopant-free asymmetric heterocontact silicon solar cells with efficiencies above 20%10.1021/acsenergylett.7b01279 ↗
14. Ellmer · 2008
15. The use of aluminium doped ZnO as transparent conductive oxide for CdS/CdTe solar cells10.1016/j.tsf.2010.12.234 ↗
16. Transparent electrodes for efficient optoelectronics10.1002/aelm.201600529 ↗
17. Improvement in open circuit voltage of n-ZnO/p-Si solar cell by using amorphous-ZnO at the interface10.1002/pip.2906 ↗
18. Silicon solar cells with bifacial metal oxides carrier selective layers10.1016/j.nanoen.2017.07.014 ↗
19. High-performance organic-silicon heterojunction solar cells by using Al-doped ZnO as cathode interlayer10.1002/solr.201700223 ↗
20. Solution-processed ZnO as the efficient passivation and electron selective layer of silicon solar cells
21. Modulation-doped ZnO as high performance electron-selective layer for efficient silicon heterojunction solar cells10.1016/j.nanoen.2018.10.010 ↗
22. Material design of transparent oxide semiconductors for organic electronics: why do zinc silicate thin films have exceptional properties?10.1002/aelm.201700352 ↗
23. New Route for “Cold-Passivation” of Defects in Tin-Based Oxides10.1021/acs.jpcc.8b02302 ↗
24. Effects of oxygen concentration on the properties of Al-doped ZnO transparent conductive films deposited by pulsed DC magnetron sputtering10.1016/j.mssp.2013.02.012 ↗
25. Tuning the optoelectronic properties of ZnO:Al by addition of silica for light trapping in high-efficiency crystalline Si solar cells10.1002/admi.201500462 ↗
26. Principles of dopant-free electron-selective contacts based on tunnel oxide/low work-function metal stacks and their applications in heterojunction solar cells10.1016/j.nanoen.2018.01.043 ↗
27. S.Bowden, A.Rohatgi, Rapid and accurate determination of series resistance and fill factor losses in industrial silicon solar cells, in: Proceedings of the 17th Eur. Photovolt. Sol. Energy Conference, 2001.
28. D.R. Lide, CRC Handbook of Chemistry and Physics, Boca Raton, Florida, 2005.
29. Investigation of atomic-layer-deposited TiOx as selective electron and hole contacts to crystalline silicon10.1016/j.egypro.2017.09.093 ↗
30. Bivour · 2015
31. J. Gelatos, S.E. Mohney, S. Datta, Fermi level depinning and contact resistivity reduction using a reduced titania interlayer in n-silicon metal-insulator-semiconductor ohmic contacts10.1063/1.4868302 ↗
32. Improving metal reflectors by suppressing surface plasmon polaritons: a priori calculation of the internal reflectance of a solar cell10.1038/lsa.2013.62 ↗