journal article·2016-01

Photoresponse enhancement of Cu2O solar cell with sulfur-doped ZnO buffer layer to mediate the interfacial band alignment

Wenzhe Niu, Mengying Zhou, Zhizhen Ye, Liping Zhu

Publisher page

Abstract

Abstract It is promising that the efficiency of cuprous oxide (Cu2O) based heterojunction solar cell can be improved by inserting a buffer layer to mediate the energy alignment at the interface. In this work, a sulfur-doped ZnO (ZnOS) buffer layer with properly tuned band alignment was introduced to the Cu2O heterojunction solar cell with Al-doped ZnO (AZO) as the n-type transparent conductive oxide layer to form an interfacial energy barrier, which improved the open-circuit voltage extremely. The experimental parameters including the oxygen pressure, buffer layer thickness and the deposition temperature were optimized. The mechanism of buffer layer was investigated, which revealed the rise of conduction band minimum of ZnOS buffer layer, thereby mitigating the interfacial recombination. This work shed light on the optimization of the interfacial band alignment of heterojunction solar cell, improving the photoresponse property.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Copper-based nanomaterials and applications · ZnO doping and properties · Electronic and Structural Properties of Oxides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Binary copper oxide semiconductors: from materials towards devices10.1002/pssb.201248128 ↗
2. 820mV open-circuit voltages from Cu2O/CH3CN junctions10.1039/c0ee00554a ↗
3. Materials availability expands the opportunity for large-scale photovoltaics deployment10.1021/es8019534 ↗
4. Preparation, characteristics and photovoltaic properties of cuprous oxide—a review10.1016/0038-1101(86)90191-7 ↗
5. Combinatorial solar cell libraries for the investigation of different metal back contacts for TiO2–Cu2O hetero-junction solar cells10.1039/C4CP00532E ↗
6. Reactive magnetron sputtering of Cu2O: dependence on oxygen pressure and interface formation with indium tin oxide10.1063/1.3592981 ↗
7. Copper oxide thin films by chemical vapor deposition: synthesis, characterization and electrical properties10.1002/pssa.201127493 ↗
8. Atomic layer deposited gallium oxide buffer layer enables 1.2V open-circuit voltage in cuprous oxide solar cells10.1002/adma.201401054 ↗
9. Ultrathin amorphous zinc-tin-oxide buffer layer for enhancing heterojunction interface quality in metal-oxide solar cells10.1039/c3ee24461j ↗
10. Novel atmospheric growth technique to improve both light absorption and charge collection in ZnO/Cu2O thin film solar cells10.1002/adfm.201203243 ↗
11. Incompatible length scales in nanostructured Cu2O solar cells10.1002/adfm.201102263 ↗
12. Effect of the thin Ga2O3 layer in n+-ZnO/n-Ga2O3/p-Cu2O heterojunction solar cells10.1016/j.tsf.2013.06.038 ↗
13. High-efficiency oxide heterojunction solar cells using Cu2O sheets10.1143/JJAP.43.L917 ↗
14. Heterojunction solar cell with 2% efficiency based on a Cu2O substrate10.1063/1.2194315 ↗
15. Cu2O-based heterojunction solar cells with an Al-doped ZnO/oxide semiconductor/thermally oxidized Cu2O sheet structure10.1016/j.solener.2014.03.036 ↗
16. Heterojunction solar cell with 6% efficiency based on an n-type aluminum–gallium–oxide thin film and p-type sodium-doped Cu2O sheet10.7567/APEX.8.022301 ↗
17. Electrochemical synthesis of metal oxides and hydroxides10.1021/cm990447a ↗
18. Absorption coefficient of bulk and thin film Cu2O10.1016/j.solmat.2011.05.047 ↗
19. Limits to doping in oxides10.1103/PhysRevB.83.075205 ↗
20. Junction studies on electrochemically fabricated p–n Cu2O homojunction solar cells for efficiency enhancement10.1039/c2cp40502d ↗
21. TiO2/Cu2O all-oxide heterojunction solar cells produced by spray pyrolysis10.1016/j.solmat.2014.10.005 ↗
22. Electrochemical growth and characterization of a p-Cu2O thin film on n-ZnO nanorods for solar cell application10.1039/c3ra47188h ↗
23. Thin-film ZnO/Cu2O solar cells incorporating an organic buffer layer10.1016/j.solmat.2011.09.043 ↗
24. Enhancing the current density of electrodeposited ZnO–Cu2O solar cells by engineering their heterointerfaces10.1039/c2jm35682a ↗
25. Preparation of ZnFe2O4 nanostructures and highly efficient visible-light-driven hydrogen generation with the assistance of nanoheterostructures10.1039/C5TA00737B ↗
26. A novel buffering technique for aqueous processing of zinc oxide nanostructures and interfaces, and corresponding improvement of electrodeposited ZnO–Cu2O photovoltaics10.1002/adfm.201001956 ↗
27. Photovoltaic properties in Al-doped ZnO/non-doped Zn1−XMgXO/Cu2O heterojunction solar cells10.1149/05051.0059ecst ↗
28. Wavelength tunable photoluminescence of ZnO1−xSx alloy thin films grown by reactive sputtering10.1063/1.4820383 ↗
29. Structural and optical properties of ZnSO alloy thin films with different S contents grown by pulsed laser deposition10.1016/j.jallcom.2013.07.015 ↗
30. Junction formation by Zn(O,S) sputtering yields CIGSe-based cells with efficiencies exceeding 18%10.1002/pip.2445 ↗
31. Strong valence-band offset bowing of ZnO1−xSx enhances p-type nitrogen doping of ZnO-like alloys10.1103/PhysRevLett.97.146403 ↗
32. Effect of interface recombination on solar cell parameters10.1016/S0927-0248(03)00101-6 ↗
33. Effects of Mg composition on open circuit voltage of Cu2O–MgxZn1−xO heterojunction solar cells10.1016/j.solmat.2011.09.047 ↗