Impact of the phosphorus emitter doping profile on metal contact recombination of silicon wafer solar cells
Source abstract
Abstract
Abstract Metallisation of phosphorus-doped silicon (Si) surfaces using screen-printed silver (Ag) pastes is a well-established process and also a key process in the production of Si wafer solar cells. The metal-Si interface in a solar cell is a highly recombination-active region that impacts the device voltage. In this work, a facile test metallisation pattern with regions of varying front metal contact fractions is screen printed to create test cells on different phosphorus emitter doping profiles, all on commercially available multicrystalline Si wafers. On these and in conjunction with H-pattern cells and cells without front metallisation, intensity-dependent photoluminescence imaging is performed to extract both the metal-induced recombination saturation current densities and parameters related to wafer edge and peripheral recombination. It is observed that as the phosphorus emitter profile becomes lightly doped and shallower, the metallisation-induced recombination losses increase. The extracted metal recombination saturation current densities ( J 01-metal and J 02-metal ) on a 50 Ω/sq phosphorus emitter surface were 1800 fA/cm 2 and 10 nA/cm 2 respectively when compared to values of 2500 fA/cm 2 and 120 nA/cm 2 respectively on a 130 Ω/sq phosphorus emitter surface. As a consequence of high metal recombination current density values for the lightly doped emitters of this study (130 Ω/sq), the solar cells fabricated from this group have a significant drop of 12 mV in open-circuit voltage values after front grid metallisation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. "Interanational Technology Roadmap for Photovoltaics (ITRPV)," 2015.
2. Co‐optimisation of the emitter region and the metal grid of silicon solar cells10.1002/1099-159X(200011/12)8:6<603::AID-PIP333>3.0.CO;2-M ↗
3. Studies of diffused phosphorus emitters: saturation current, surface recombination velocity, and quantum efficiency10.1109/16.46368 ↗
4. Electrical and microstructural analysis of contact formation on lightly doped phosphorus emitters using thick-film Ag screen printing pastes10.1109/JPHOTOV.2013.2291313 ↗
5. Investigation of the mechanism resulting in low resistance Ag thick-film contact to Si solar cells in the context of emitter doping density and contact firing for current-generation Ag paste10.1109/JPHOTOV.2013.2285621 ↗
6. High-temperature contact formation on n-type silicon: basic reactions and contact model for seed-layer contacts10.1002/adfm.200901305 ↗
7. Optimisation of screen-printed metallisation for industrial high-efficiency silicon wafer solar cells10.1016/j.egypro.2013.05.040 ↗
8. Analysis of fine-line screen and stencil-printed metal contacts for silicon wafer solar cells10.1109/JPHOTOV.2014.2388073 ↗
9. Recombination at metal-emitter interfaces of front contact technologies for highly efficient silicon solar cells10.1016/j.egypro.2011.06.111 ↗
10. Metallization–induced recombination losses of bifacial silicon solar cells10.1002/pip.2479 ↗
11. Impact of screen printing silver paste components on the space charge region recombination losses of industrial silicon solar cells10.1016/j.solmat.2012.06.040 ↗
12. Determination of metal contact recombination parameters for silicon wafer solar cells by photoluminescence imaging10.1016/j.solener.2015.05.010 ↗
13. J. Wong, Griddler: Intelligent computer aided design of complex solar cell metallization patterns, in: Photovoltaic Specialists Conference (PVSC), 2013 IEEE 39th, 2013, pp. 0933–093810.1109/PVSC.2013.6744296 ↗
14. P. Basu, M. Boreland, S. Vinodh, and D. Sarangi, Non-acidic isotropic etch-back method for silicon wafer solar cells, US Provisional Application No.: 61, vol. 644730, 2012
15. R. Sinton and A. Cuevas, A quasi-steady-state open-circuit voltage method for solar cell characterization, in: Proceedings of the 16th European Photovoltaic Solar Energy Conference, 2000
16. Measurement of the emitter saturation current by a contactless photoconductivity decay method
17. Campos · 2013
18. J. Wong, R. Sridharan, and V. Shanmugam, Quantifying edge and peripheral recombination in industrial solar cells.