Structural and optical properties of textured ZnO:Al films on glass substrates prepared by in-line rf magnetron sputtering
Source abstract
Abstract
Textured ZnO:Al films with excellent light scattering properties as a front electrode of silicon thin film solar cells were prepared on glass substrates by an in-line rf magnetron sputtering, followed by a wet-etching process to modify the surface morphologies of the films. Deposition parameters and wet etching conditions of the films were controlled precisely to obtain the optimized surface features. All as-deposited films show a strong preferred orientation in the [001] direction under our experimental conditions. The microstructure of the films was significantly affected by working pressure and film compactness was reduced with increasing working pressure, while the effect of a substrate temperature on the microstructure is less pronounced. A low resistivity of 4.25 x 10- 4 Ω cm and high optical transmittance of above 80% in a visible range were obtained in the films deposited at 1.5 mTorr and 100 °C. After wet etching process, the surface morphologies of the films were changed dramatically depending on the microstructure and film compactness of the initial films. By controlling the surface feature, the haze factor and angular resolved distribution of the textured ZnO:Al films were improved remarkably when compared with commercial SnO 2 :F films. The textured ZnO:Al and SnO 2 :F films were applied as substrates for a silicon thin film solar cells with tandem structure of a-Si:H/μc-Si:H. Compared with the solar cells with the SnO 2 :F films, a significant enhancement in the short-circuit current density of the μc-Si:H bottom cell was achieved, which is due to the improved light scattering on the highly textured ZnO:Al film surfaces in the long wavelength above 600 nm.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: ZnO doping and properties · Thin-Film Transistor Technologies · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (10)
Show source-provided references
1. Transparent conducting oxide films for thin film silicon photovoltaics10.1016/j.tsf.2007.08.110 ↗
2. Recent development on surface-textured ZnO:Al films prepared by sputtering for thin-film solar cell application10.1016/j.tsf.2007.10.029 ↗
3. Texture etched ZnO:Al coated glass substrates for silicon based thin film solar cells10.1016/S0040-6090(99)00085-1 ↗
4. Optical modeling of a-Si:H solar cells deposited on textured glass/SnO2 substrates10.1063/1.1487910 ↗
5. Modified Thorton model for magnetron sputtered zinc oxide: film structure and etching behavior10.1016/S0040-6090(03)00949-0 ↗
6. Surface textured MF-sputtered ZnO films for microcrystalline silicon-based thin film solar cells10.1016/j.solmat.2006.06.027 ↗
7. Comparative material study on RF and DC magnetron sputtered ZnO:Al films10.1016/j.tsf.2005.07.313 ↗
8. Superstrate p–i–n a-Si:H solar cells on textured ZnO:Al front transparent conduction oxide10.1016/j.spmi.2007.04.050 ↗
9. Efforts to improve carrier mobility in radio frequency sputtered aluminum doped zinc oxide films10.1063/1.1641524 ↗
10. Effects of surface morphology of transparent electrode on the open-circuit voltage in a-Si:H solar cells10.1143/JJAP.29.630 ↗