journal article·2013-05

Study of difluorochloromethane activation treatment on low substrate temperature deposited CdTe solar cells

Andrei Salavei, Ivan Rimmaudo, Fabio Piccinelli, Pawel Zabierowski, Alessandro Romeo

Publisher page

Abstract

Abstract In this paper we describe a low substrate temperature CdTe fabrication process by vacuum evaporation (VE) where the recrystallization step avoids the use of CdCl2, which is a carcinogenic material. In our process CdS and CdTe are deposited at pressures of 10−6 mbar in the same chamber by thermal evaporation and with substrate temperature of 150 °C and 340 °C, respectively. The CdTe/CdS/TCO stacks are then put in a quartz chamber and, after having previously pumped the chamber down to 10−5 mbar, a controlled mixture of argon and chlorine containing gas is fluxed with a substrate temperature in a range between 400 °C and 450 °C. The morphological properties of the single layers are studied by X-ray diffraction (XRD), atomic force microscopy (AFM), cathodo-luminescence (CL) and the electrical properties of the finished devices are presented by means of current–voltage (I–V) and capacitance–voltage (C–V) measurements.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Advanced Semiconductor Detectors and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. Development of thin-film Cu(In,Ga)Se2 and CdTe solar cells10.1002/pip.527 ↗
2. A highly efficient and stable CdTe/CdS thin film solar cell10.1016/S0927-0248(98)00204-9 ↗
3. A. Romeo, G. Khrypunov, S. Galassini, H. Zogg A.N. Tiwari, N. Romeo, A. Bosio, S. Mazzamuto. Comparison of CSS-CdTe and PVD-CdTe with different activation processes, in: Proceedings of 22nd EU PV SECTION, 3–7 September 2007, Milan, Italy, p. 2367.
4. Study of CSS- and HVE-CdTe by different recrystallization processes10.1016/j.tsf.2008.10.129 ↗
5. Recrystallization in CdTe/CdS10.1016/S0040-6090(99)00753-1 ↗
6. D.M. Waters, D. Niles, T.A. Gessert, D. Albin, D.H. Rose, P. Sheldon, Surface analysis of CdTe after various pre-contact treatments, in: Proceedings of Second WC PV SEC, 6–10 July 1998, Vienna, Austria. vol. I, p. 1031.
7. A.I.L.E.S.: a random walk simulation approach to cathodoluminescence processes in semiconductors
8. Spectroscopic analysis of defects in chlorine doped polycrystalline CdTe10.1063/1.2174117 ↗
9. A photoluminescence study of polycrystalline thin-film CdTe/CdS solar cells10.1016/S0022-0248(97)00819-1 ↗
10. Electronic loss mechanisms in chalcopyrite based heterojunction solar cells10.1016/S0040-6090(99)00762-2 ↗
11. Electronic properties of CuGaSe2-based heterojunction solar cells. Part I. Transport analysis10.1063/1.371903 ↗
12. Determination of dominant recombination paths in Cu(In,Ga)Se2 thin-film solar cells with ALD–ZnO buffer layers10.1016/j.tsf.2004.11.008 ↗
13. Bulk and metastable defects in CuIn1−xGaxSe2 thin films using drive-level capacitance profiling10.1063/1.1633982 ↗
14. Capacitance spectroscopy of thin film solar cells