journal article·2014-11

Improved coloration contrast and electrochromic efficiency of tungsten oxide films thanks to a surfactant-assisted ultrasonic spray pyrolysis process

J. Denayer, P. Aubry, G. Bister, G. Spronck, P. Colson, B. Vertruyen, V. Lardot, F. Cambier, C. Henrist, R. Cloots

Publisher page

Abstract

Abstract Tungsten oxide thin films are known for their excellent electrochromic efficiency, nevertheless, most of deposition methods reported in the literature are not suitable to produce high quality films and at low cost. In this paper, tungsten oxide thin films have been deposited on FTO–glass substrates by a surfactant-assisted ultrasonic spray pyrolysis. This deposition method, associated to the presence of surfactant, has led to improved electrochromic performance of tungsten oxide films, without excessive production cost. Tungsten oxide films made by the surfactant-assisted ultrasonic spray pyrolysis show a high specific surface area, which results in one of the highest coloration contrast (83%) ever reported for tungsten oxide thin films. WO3 thin films also show excellent reversibility (94%), as well as good coloration efficiency (28 cm2/C).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Transition Metal Oxide Nanomaterials · Gas Sensing Nanomaterials and Sensors · Ga2O3 and related materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Improved durability of WO3 nanocomposite films using atomic layer and vapor deposited coatings10.1149/2.002206eel ↗
2. Study of WO3 films with textured surfaces for improved electrochromic performance10.1016/S0167-2738(00)00827-4 ↗
3. Annealing induced microstructural evolution of electrodeposited electrochromic tungsten oxide films10.1016/j.apsusc.2005.02.123 ↗
4. Towards electrochromic stability in sol–gel-derived tungsten oxide films: cyclic voltammetric and spectrophotometric investigations10.1016/j.solmat.2005.01.006 ↗
5. Structural evolution and chemical bonds in electrochromic WO3 films during electrochemical cycles10.1088/0022-3727/45/22/225303 ↗
6. Electro-optical response of tungsten oxide thin film nanostructures processed by a template-assisted electrodeposition route10.1016/j.actamat.2007.07.056 ↗
7. Low-temperature ozone exposure technique to modulate the stoichiometry of WOx nanorods and optimize the electrochromic performance10.1088/0957-4484/23/25/255601 ↗
8. Synthesis and characterization of WO3 thin films by surfactant assisted spray pyrolysis for electrochromic applications10.1016/j.matchemphys.2013.02.047 ↗
9. Ultrasonic spray deposition of high performance WO3 films using template-assisted sol–gel chemistry10.1016/j.elecom.2012.09.017 ↗
10. The influence of sol–gel processing on the electrochromic properties of mesoporous WO3 films produced by ultrasonic spray deposition10.1016/j.solmat.2013.11.002 ↗
11. Synthesis of WO3 thin films by surfactant mediated spray pyrolysis10.1016/j.ceramint.2011.11.060 ↗
12. Comparison of electrochromic amorphous and crystalline electron beam deposited WO3 thin films10.1016/j.cap.2007.11.012 ↗
13. Electrochromic properties of nanocrystalline tungsten oxide thin films10.1016/S0040-6090(97)00796-7 ↗
14. Optical properties of Li+ doped electrochromic WO3 thin films10.1016/S0040-6090(00)01378-X ↗
15. The effect of water on the electrochromic properties of WO3 films prepared by vacuum and chemical methods10.1016/j.solmat.2004.02.019 ↗
16. Effect of hydrogen peroxide and oxalic acid on electrochromic nanostructured tungsten oxide thin films10.1016/S1452-3981(23)13336-0 ↗
17. Structures and electrochromic properties of tungsten oxide films prepared by magnetron sputtering10.1016/j.apsusc.2005.03.170 ↗
18. From beads-to-wires-to-fibers of tungsten oxide: electrochromic response10.1007/s00339-009-5334-8 ↗
19. Electrodeposited tungsten oxide films: annealing effects on structure and electrochromic performance10.1016/j.tsf.2004.04.056 ↗
20. A comparison of electrochromic properties of sol–gel derived amorphous and nanocrystalline tungsten oxide films10.1016/j.cap.2006.06.001 ↗
21. Effect of humidity on structure and electrochromic properties of sol–gel-derived tungsten oxide films10.1016/j.solmat.2006.02.032 ↗
22. Influence of annealing on electrochromic performance of template assisted, electrochemically grown, nanostructured assembly of tungsten oxide10.1016/j.actamat.2006.05.044 ↗
23. Microstructural and electrochromic properties of tungsten oxide thin films produced by surfactant mediated electrodeposition10.1016/j.apsusc.2007.09.035 ↗
24. Enhanced electrochromic performance of f-MWCNT–WO3 composite10.1016/j.electacta.2011.09.082 ↗
25. Electrochromic films produced by ultrasonic spray deposition of tungsten oxide nanoparticles10.1016/j.solmat.2011.03.034 ↗
26. Transmission attenuation and chromic contrast characterization of R.F. sputtered WO3 thin films for electrochromic device applications10.1016/j.electacta.2012.08.093 ↗
27. Effect of oxalic acid dihydrate on optical and electrochemical properties of sol–gel derived amorphous electrochromic WO3 films10.1016/j.electacta.2005.01.008 ↗
28. Spin coated versus dip coated electrochromic tungsten oxide films: Structure, morphology, optical and electrochemical properties10.1016/j.electacta.2005.06.027 ↗
29. Electrochromic properties of nanocomposite WO3 films10.1016/j.solmat.2006.11.020 ↗
30. WO3−x nanowires based electrochromic devices10.1016/j.solmat.2005.07.009 ↗
31. Morphology-tailored synthesis of vertically aligned 1D WO3 nanostructure films for highly enhanced electrochromic performance10.1039/C2TA00090C ↗
32. Electrochromic properties of tungsten oxide nanowires fabricated by electrospinning method10.1016/j.solmat.2009.02.008 ↗