Will ultrathin CIGS solar cells overtake the champion thin-film cells? Updated SCAPS baseline models reveal main differences between ultrathin and standard CIGS
Source abstract
Abstract
Cu(In,Ga)Se2 (CIGS) solar cells are amongst the best performing thin-film technologies, with the latest performance gains being mainly due to recent years improvements obtained with post-deposition treatments (PDT). Moreover, thinning of the absorber layer down to sub-micrometre values (ultrathin absorbers) is of extreme importance for CIGS to be even more cost-effective and sustainable. However, electrical and optical limitations, such as rear interface recombination and insufficient light absorption, prevent the widespread implementation of ultrathin CIGS devices. The recent electrical CIGS simulation baseline models have failed to keep up with the experimental developments. Here an updated and experimentally based baseline model for electrical simulations in the Solar Cell Capacitor Simulator (SCAPS) software is presented and discussed with the incorporation of the PDT effects and increased optical accuracy with the support from Finite-Difference Time-Domain (FDTD) simulation results. Furthermore, a champion solar cell with an equivalent architecture validates the developed thin-film model. The baseline model is also applied to ultrathin CIGS solar cell devices, validated with the ultrathin champion cell. Ultimately, these ultrathin models pave the way for an ultrathin baseline model. Simulations results reveal that addressing these absorbers' inherent limitations makes it possible to achieve an ultrathin solar cell with at least 21.0% power conversion efficiency, with open-circuit voltage values even higher than the recent thin-film champion cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (92)
Show source-provided references
1. Solar cell efficiency tables (Version 58)10.1002/pip.3444 ↗
2. Cd-free Cu(in,Ga)(Se,S)2 thin-film solar cell with record efficiency of 23.3510.1109/JPHOTOV.2019.2937218 ↗
3. Numerical analysis of the effect of grain size and defects on the performance of CIGS solar cells
4. On the combined effects of window/buffer and buffer/absorber conduction-band offsets, buffer thickness and doping on thin-film solar cell performance10.1016/j.solmat.2013.10.037 ↗
5. Numerical simulation of CIGS solar cells with Zn(O,S) or (Cd,Zn)S buffers and (Zn,Mg)O as high-resistive layer
6. Highly efficient Cu(In,Ga)Se2 solar cells grown on flexible polymer films10.1038/nmat3122 ↗
7. Improved photocurrent in Cu(in,Ga)Se2 solar cells: from 20.8% to 21.7% efficiency with CdS buffer and 21.0% Cd-free10.1109/JPHOTOV.2015.2458039 ↗
8. High-efficiency Cu(In,Ga)Se2 solar cells10.1016/j.tsf.2016.08.021 ↗
9. Unveiling the effects of post-deposition treatment with different alkaline elements on the electronic properties of CIGS thin film solar cells10.1039/c4cp00614c ↗
10. Setting up a device model for Rb-conditioned chalcopyrite solar cells
11. Modelling polycrystalline semiconductor solar cells10.1016/S0040-6090(99)00825-1 ↗
12. Baseline model of graded-absorber Cu(In,Ga)Se2 solar cells applied to cells with Zn1 - xMgxO buffer layers10.1016/j.tsf.2010.12.141 ↗
13. Defect physics of the CuInSe2 chalcopyrite semiconductor10.1103/PhysRevB.57.9642 ↗
14. Lattice defects in I-III-VI2 compounds10.1016/0022-3697(86)90183-6 ↗
15. Electrical properties of p- and n-type CuInSe2 single crystals10.1143/JJAP.18.1303 ↗
16. Photoluminescence studies of CuInSe2: identification of intrinsic defect levels10.1016/0146-3535(84)90057-1 ↗
17. Defect physics of the CuInSe2 chalcopyrite semiconductor10.1016/S0022-3697(99)00190-0 ↗
18. New approach to high-efficiency solar cells by band gap grading in Cu(In,Ga)Se2 chalcopyrite semiconductors10.1016/S0927-0248(00)00274-9 ↗
19. Chalcopyrite/defect chalcopyrite heterojunctions on the basis of CuInSe210.1063/1.353020 ↗
20. Theoretical study on the structure and energetics of Cd insertion and Cu depletion of CuIn5Se810.1021/jp312467f ↗
21. Hybrid-functional calculations on the incorporation of Na and K impurities into the CuInSe2 and CuIn5Se8 solar-cell materials10.1021/acs.jpcc.5b07639 ↗
22. Numerical modeling of CIGS and CdTe solar cells: setting the baseline
23. New world record efficiency for Cu(In,Ga)Se2 thin-film solar cells beyond 2010.1002/pip.1078 ↗
24. Compositional investigation of potassium doped Cu(In,Ga)Se2 solar cells with efficiencies up to 20.810.1002/pssr.201409040 ↗
25. Effects of heavy alkali elements in Cu(In,Ga)Se2 solar cells with efficiencies up to 22.610.1002/pssr.201600199 ↗
26. Record efficiency for thin-film polycrystalline solar cells up to 22.9% achieved by Cs-treated Cu(in,Ga)(Se,S)210.1109/JPHOTOV.2018.2882206 ↗
27. On the importance of joint mitigation strategies for front, bulk, and rear recombination in ultrathin Cu(In,Ga)Se2 solar cells10.1021/acsami.1c07943 ↗
28. High-performance and industrially viable nanostructured SiOx layers for interface passivation in thin film solar cells10.1002/solr.202170036 ↗
29. Encapsulation of nanostructures in a dielectric matrix providing optical enhancement in ultra‐thin solar cells10.1002/solr.202000310 ↗
30. Rear optical reflection and passivation using a nanopatterned metal/dielectric structure in thin-film solar cells10.1109/JPHOTOV.2019.2922323 ↗
31. Optoelectronic simulations for novel light management concepts in Cu(In,Ga)Se2 solar cells
32. Exploiting the optical limits of thin film solar cells: a review on light management strategies in Cu(in,Ga)Se210.1002/adpr.202100190 ↗
33. Passivation of interfaces in thin film solar cells: understanding the effects of a nanostructured rear point contact layer
34. Insulator materials for interface passivation of Cu(in,Ga)Se2 thin films10.1109/JPHOTOV.2018.2846674 ↗
35. Light coupling and trapping in ultrathin Cu(in,Ga)Se2 solar cells using dielectric scattering patterns10.1021/acsnano.5b04091 ↗
36. Decoupling of optical and electrical properties of rear contact CIGS solar cells
37. Integration of plasmonic Ag nanoparticles as a back reflector in ultra-thin Cu(In,Ga)Se2 solar cells10.1016/j.apsusc.2015.07.195 ↗
38. Light trapping in ultrathin CIGS solar cells with nanostructured back mirrors10.1109/JPHOTOV.2017.2726566 ↗
39. Surface passivation of Cu(In,Ga)Se2 using atomic layer deposited Al2O310.1063/1.3675849 ↗
40. Investigating the electronic properties of Al2O3/Cu(In,Ga)Se2 interface10.1063/1.4932512 ↗
41. Effectiveness of an RbF post deposition treatment of CIGS solar cells in dependence on the Cu content of the absorber layer10.1109/JPHOTOV.2019.2929418 ↗
42. Addressing the impact of rear surface passivation mechanisms on ultra-thin Cu(In,Ga)Se2 solar cell performances using SCAPS 1-D model10.1016/j.solener.2017.08.055 ↗
43. Cu-rich CuInSe2 solar cells with a Cu-poor surface10.1002/pip.2493 ↗
44. Flat conduction-band alignment at the CdS/CuInSe2 thin-film solar-cell heterojunction10.1063/1.1428408 ↗
45. Characterization of interface between accurately controlled Cu-deficient layer and Cu(in,Ga)Se2 absorber for Cu(in,Ga)Se2 solar cells
46. Device modeling and simulation of the performance of Cu(In1-x,Gax)Se2 solar cells10.1016/S0038-1101(03)00289-2 ↗
47. Correlation between carrier recombination and valence band offset effect of graded Cu(In,Ga)Se2 solar cells10.1016/j.solmat.2019.110070 ↗
48. Effect of Cu-deficient layer formation in Cu(In,Ga)Se2 solar-cell performance10.1002/pip.2972 ↗
49. Potassium-induced surface modification of Cu(In,Ga)Se2 thin films for high-efficiency solar cells10.1038/nmat3789 ↗
50. Dielectric function of Cu(In, Ga)Se2-based polycrystalline materials10.1063/1.4790174 ↗
51. Refractive indices of layers and optical simulations of Cu(In,Ga)Se2 solar cells10.1080/14686996.2018.1458579 ↗
52. Structural and optical properties of magnetron sputtered MgxZn1-xO thin films10.1088/0953-8984/18/13/002 ↗
53. A comparison between thin film solar cells made from co-evaporated CuIn1-xGaxSe2 using a one-stage process versus a three-stage process10.1002/pip.2453 ↗
54. Effects of Ga addition to CuInSe2 on its electronic, structural, and defect properties10.1063/1.121548 ↗
55. Optimizing Ga-profiles for highly efficient Cu(In,Ga)Se2 thin film solar cells in simple and complex defect models10.1088/0022-3727/47/48/485104 ↗
56. Enhancing photocurrent of Cu(In,Ga)Se2 solar cells with actively controlled Ga grading in the absorber layer10.1016/j.nanoen.2019.05.052 ↗
57. From 20.9 to 22.3% Cu(In,Ga)(S,Se) 2 solar cell: reduced recombination rate at the heterojunction and the depletion region due to K-treatment10.7567/JJAP.56.08MC03 ↗
58. Recombination mechanisms in Cu(in,Ga)(Se,S)2 solar cells
59. MULTILAYER ANALYSIS OF THE CdTe SOLAR CELL STRUCTURE BY SPECTROSCOPIC ELLIPSOMETRY
60. Band offsets at the CdS/CuInSe2 heterojunction10.1063/1.110429 ↗
61. Theoretical analysis of the effect of conduction band offset of window/CIS layers on performance of CIS solar cells using device simulation10.1016/S0927-0248(00)00266-X ↗
62. Investigation of the defect chemistry of CuInSe2 single crystals by DLTS measurements
63. Majority and minority carrier traps in monocrystalline CulnSe210.1007/BF02665026 ↗
64. Photoluminescence of a high quality CuInSe2 single crystal10.1143/JJAP.37.L269 ↗
65. Study of deep levels in Schottky/CulnSe2 single-crystal devices by deep-level transient spectroscopy measurements10.1007/BF00133114 ↗
66. Defect properties of CuInSe2 and CuGaSe210.1016/j.jpcs.2005.10.003 ↗
67. Numerical simulation of carrier collection and recombination at grain boundaries in Cu(In,Ga)Se2 solar cells10.1063/1.2917293 ↗
68. Grain-boundary recombination in Cu(In,Ga)Se2 solar cells10.1063/1.2133906 ↗
69. Defects and transport in the wide gap chalcopyrite CuGaSe210.1016/S0022-3697(03)00150-1 ↗
70. Kelvin probe force microscopy for the nano scale characterization of chalcopyrite solar cell materials and devices10.1016/S0040-6090(03)00267-0 ↗
71. Texture and electronic activity of grain boundaries in Cu(In,Ga)Se2 thin films10.1007/s00339-005-3411-1 ↗
72. Cu(In,Ga)Se2 solar cells with varying Na content prepared on nominally alkali-free glass substrates10.1109/JPHOTOV.2013.2247655 ↗
73. Progress toward 20% efficiency in Cu(In,Ga)Se2 polycrystalline thin-film solar cells10.1002/(SICI)1099-159X(199907/08)7:4<311::AID-PIP274>3.0.CO;2-G ↗
74. CIGS cells and modules with high efficiency on glass and flexible substrates10.1109/JPHOTOV.2013.2280468 ↗
75. Comparison of CIGS solar cells made with different structures and fabrication techniques10.1109/JPHOTOV.2016.2616188 ↗
76. Efficiency enhancement of Cu(In,Ga)Se2 thin-film solar cells by a post-deposition treatment with potassium fluoride10.1002/pssr.201307238 ↗
77. Review of grain interior, grain boundary, and interface effects of K in CIGS solar cells: mechanisms for performance enhancement10.1016/j.solmat.2017.07.006 ↗
78. Heavy alkali treatment of Cu(in,Ga)Se2 solar cells: surface versus bulk effects10.1002/aenm.201903752 ↗
79. Direct evidence for grain boundary passivation in Cu(In,Ga)Se2 solar cells through alkali-fluoride post-deposition treatments10.1038/s41467-019-11996-y ↗
80. Fermi level pinning and effects on CuInGaSe2-based thin-film solar cells10.1088/0268-1242/24/5/055016 ↗
81. Characterization of the Cu(In,Ga)Se2/Mo interface in CIGS solar cells10.1016/S0040-6090(00)01846-0 ↗
82. High quality baseline for high efficiency, Cu(In1-x,Gax)Se2 solar cells10.1002/pip.757 ↗
83. Efficiency increased to 15.2% for ultra-thin Cu(In,Ga)Se2 solar cells10.1002/pip.3033 ↗
84. Contreras
85. HIGH EFFICIENCY Cu(In,Ga)Se2-BASED SOLAR CELLS: processing OF novel absorber structures
86. Cu(In,Ga)Se2 thin films grown with a Cu-poor/rich/poor sequence: growth model and structural considerations10.1002/pip.495 ↗
87. Properties of Cu(In,Ga)Se2 solar cells with new record efficiencies up to 21.710.1002/pssr.201409520 ↗
88. Reflective back contacts for ultrathin Cu(in,Ga)Se2-based solar cells10.1109/JPHOTOV.2019.2945196 ↗
89. On the thickness dependence of open circuit voltages of p-n junction solar cells10.1016/0927-0248(93)90098-N ↗
90. Development of rear surface passivated Cu(In,Ga)Se2 thin film solar cells with nano-sized local rear point contacts10.1016/j.solmat.2013.07.025 ↗
91. Introduction of Si PERC rear contacting design to boost efficiency of Cu(In,Ga)Se2 solar cells10.1109/JPHOTOV.2014.2350696 ↗
92. Buffer layer point contacts for CIGS solar cells using nanosphere lithography and atomic layer deposition10.1109/JPHOTOV.2016.2627621 ↗