journal article·2022-04

A modified method to quantify the photo-thermal conversion efficiency of shape-stable phase change materials

Ruijin Fan, Nianben Zheng, Zhiqiang Sun

Publisher page

Abstract

Photo-thermal conversion phase change materials (PCMs), which can overcome the gap between the demand and supply of solar energy, have shown significant potential in solar energy utilization. The photo-thermal conversion efficiency is a critical factor in determining the photo-thermal conversion performance of PCMs. Most previous investigations only considered the latent heat stored by PCMs to determine the photo-thermal conversion efficiency. The sensible heat absorbed by PCMs before and after the phase transition process was neglected, which might overestimate the photo-thermal conversion performance of PCMs. As an improvement, a modified method, considering both sensible and latent heat absorption and the temperature difference within the PCMs, was proposed to determine the photo-thermal conversion efficiency of PCMs accurately. Shape-stable PCMs with polyethylene glycol (PEG), few-layers graphene (FLG), and melamine foam (MF) as the PCM, photo absorber, and supporting material, respectively, were prepared to test the reliability and effectiveness of the proposed method. Results showed that the actual efficiency of PCMs was less than 25%, which truly reflected the photo-thermal conversion performance of PCMs, demonstrating that more work should be conducted to enhance the photo-thermal conversion performance for efficient solar energy utilization.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Solar Thermal and Photovoltaic Systems · Solar-Powered Water Purification Methods

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Exergoeconomic optimization of a solar driven system with reverse osmosis desalination unit and phase change material thermal energy storages10.1016/j.enconman.2019.112042 ↗
2. Phase change materials for electro-thermal conversion and storage: from fundamental understanding to engineering design10.1016/j.isci.2020.101208 ↗
3. Energy and exergy analyses of various typical solar energy applications: a comprehensive review10.1016/j.rser.2017.07.003 ↗
4. Performance improvement of solar thermal systems integrated with phase change materials (PCM), a review10.1016/j.solener.2020.05.106 ↗
5. Magnetically-accelerated photo-thermal conversion and energy storage based on bionic porous nanoparticles10.1016/j.solmat.2020.110681 ↗
6. A review of melting and freezing processes of PCM/nano-PCM and their application in energy storage10.1016/j.energy.2020.118698 ↗
7. High-temperature phase change materials for short-term thermal energy storage in the solar receiver: selection and analysis10.1016/j.est.2020.101496 ↗
8. Fabrication and characterization of poly(melamine-formaldehyde)/silicon carbide hybrid microencapsulated phase change materials with enhanced thermal conductivity and light-heat performance10.1016/j.solmat.2018.03.019 ↗
9. Melamine foam-supported form-stable phase change materials with simultaneous thermal energy storage and shape memory properties for thermal management of electronic devices10.1021/acsami.9b06198 ↗
10. Polyethylene glycol/graphene oxide aerogel shape-stabilized phase change materials for photo-to-thermal energy conversion and storage via tuning the oxidation degree of graphene oxide10.1016/j.enconman.2017.05.037 ↗
11. Phase change materials for electron-triggered energy conversion and storage: a review10.1039/C9TA06678K ↗
12. Leakage-proof phase change composites supported by biomass carbon aerogels from succulents10.1039/C7GC03595K ↗
13. Graphite foam as interpenetrating matrices for phase change paraffin wax: a candidate composite for low temperature thermal energy storage10.1016/j.solmat.2017.08.004 ↗
14. Polyurethane rigid foam composites incorporated with fatty acid ester-based phase change material10.1016/j.enconman.2012.12.015 ↗
15. Alkylated phase change composites for thermal energy storage based on surface-modified silica aerogels10.1039/C4TA06735E ↗
16. A novel paraffin/expanded perlite composite phase change material for prevention of PCM leakage in cementitious composites10.1016/j.apenergy.2015.08.019 ↗
17. Melamine foam/polyethylene glycol composite phase change material synergistically modified by polydopamine/MXene with enhanced solar-to-thermal conversion10.1016/j.renene.2021.02.077 ↗
18. Three-dimensional rGO@sponge framework/paraffin wax composite shape-stabilized phase change materials for solar-thermal energy conversion and storage10.1016/j.solmat.2020.110600 ↗
19. 3D graphene paraffin composites based on sponge skeleton for photo thermal conversion and energy storage10.1016/j.applthermaleng.2020.115560 ↗
20. Reduced graphene oxide and zirconium carbide co-modified melamine sponge/paraffin wax composites as new form-stable phase change materials for photothermal energy conversion and storage10.1016/j.applthermaleng.2019.114412 ↗
21. Novel flexible phase change materials with Mussel-inspired modification of melamine foam for simultaneous light-actuated shape memory and light-to-thermal energy storage capability10.1021/acssuschemeng.9b03169 ↗
22. Simultaneous solar-thermal energy harvesting and storage via shape stabilized salt hydrate phase change material10.1016/j.cej.2020.126624 ↗
23. Melamine foam-templated graphene nanoplatelet framework toward phase change materials with multiple energy conversion abilities10.1016/j.cej.2019.02.023 ↗
24. Largely enhanced thermal conductivity of poly (ethylene glycol)/boron nitride composite phase change materials for solar-thermal-electric energy conversion and storage with very low content of graphene nanoplatelets10.1016/j.cej.2017.01.045 ↗
25. Highly thermally conductive phase change composites with excellent solar-thermal conversion efficiency and satisfactory shape stability on the basis of high-quality graphene-based aerogels10.1016/j.compscitech.2020.108492 ↗
26. Thermal performance enhancement of eutectic PCM laden with functionalised graphene nanoplatelets for an efficient solar absorption cooling storage system
27. A novel CNT encapsulated phase change material with enhanced thermal conductivity and photo-thermal conversion performance10.1016/j.solmat.2018.04.034 ↗
28. Photo-thermal conversion structure by infiltration of paraffin in three dimensionally interconnected porous polystyrene-carbon nanotubes (PS-CNT) polyHIPE foam10.1016/j.solmat.2018.11.022 ↗
29. A full-band sunlight-driven carbon nanotube/PEG/SiO2 composites for solar energy storage10.1016/j.solmat.2013.12.022 ↗
30. Carbon black nano particle loaded lauric acid-based form-stable phase change material with enhanced thermal conductivity and photo-thermal conversion for thermal energy storage10.1016/j.energy.2019.116572 ↗
31. Solar thermal conversion and thermal energy storage of CuO/Paraffin phase change composites10.1016/j.ijheatmasstransfer.2018.11.026 ↗
32. Graphene-CoO/PEG composite phase change materials with enhanced solar-to-thermal energy conversion and storage capacity10.1016/j.compscitech.2020.108197 ↗
33. Highly efficient photothermal conversion capric acid phase change microcapsule: silicon carbide modified melamine urea formaldehyde10.1016/j.jcis.2020.08.014 ↗
34. Synthesis of novel microencapsulated phase change materials with copper and copper oxide for solar energy storage and photo-thermal conversion10.1016/j.solmat.2018.02.008 ↗
35. Ag-graphene/PEG composite phase change materials for enhancing solar-thermal energy conversion and storage capacity10.1016/j.apenergy.2018.12.075 ↗
36. Preparation and performances of sunlight-induced phase change PEG/SiO2-dye composite for solar energy conversion and storage
37. Low-cost carbon foam as a practical support for organic phase change materials in thermal management10.1016/j.apenergy.2019.114108 ↗
38. In-situ derived graphene from solid sodium acetate for enhanced photothermal conversion, thermal conductivity, and energy storage capacity of phase change materials10.1016/j.solmat.2019.110269 ↗
39. MXene aerogel-based phase change materials toward solar energy conversion10.1016/j.solmat.2019.110229 ↗
40. Hypophosphite tailored graphitized hierarchical porous biochar toward highly efficient solar thermal energy harvesting and stable Storage/Release10.1016/j.cej.2021.129942 ↗
41. Flexible textiles with polypyrrole deposited phase change microcapsules for efficient photothermal energy conversion and storage10.1016/j.solmat.2021.110985 ↗
42. 3D reduced graphene oxide aerogel supported TiO2-x for shape-stable phase change composites with high photothermal efficiency and thermal conductivity10.1016/j.solmat.2021.111068 ↗
43. The reinforced photothermal effect of conjugated dye/graphene oxide-based phase change materials: fluorescence resonance energy transfer and applications in solar-thermal energy storage
44. Improving the heat storage/release rate and photo-thermal conversion performance of an organic PCM/expanded graphite composite block10.1016/j.solmat.2019.110081 ↗
45. Melamine foam/reduced graphene oxide supported form-stable phase change materials with simultaneous shape memory property and light-to-thermal energy storage capability10.1016/j.cej.2019.122373 ↗
46. AAZO-Graphene composite phase change materials with Photo-thermal conversion performance10.1016/j.solener.2021.05.036 ↗
47. Phase change material based on polypyrrole/Fe3O4- functionalized hollow kapok fiber aerogel matrix for solar/magnetic- thermal energy conversion and storage10.1016/j.cej.2021.130180 ↗
48. Flame-retardant and solid-solid phase change composites based on dopamine-decorated BP nanosheets/Polyurethane for efficient solar-to-thermal energy storage10.1016/j.renene.2020.09.067 ↗
49. Ti3C2Tx@Polyvinyl alcohol foam-supported phase change materials with simultaneous enhanced thermal conductivity and solar-thermal conversion performance10.1016/j.solmat.2020.110813 ↗
50. Multiresponsive shape-adaptable phase change materials with cellulose nanofiber/graphene nanoplatelet hybrid-coated melamine foam for light/electro-to-thermal energy storage and utilization10.1021/acsami.9b16612 ↗
51. Ultralight and flexible carbon foam-based phase change composites with high latent-heat capacity and photothermal conversion capability10.1021/acsami.9b10330 ↗
52. Optimization on the photo-thermal conversion performance of graphite nanoplatelets decorated phase change material emulsions10.1016/j.solmat.2018.07.005 ↗
53. Flexible phase change materials with enhanced tensile strength, thermal conductivity and photo-thermal performance10.1016/j.solmat.2020.110728 ↗