Experimental investigation and optical visualization of a salt gradient solar pond integrated with PCM
Source abstract
Abstract
Abstract The thermal performance of a solar pond is affected by the amount of heat lost to the ground through the lower convective zone (LCZ) in which the heat is stored. Studies are focused on decreasing the heat losses, to maximize the energy stored and guarantee the stability of the thermohaline system over time. Phase change materials (PCMs) can help to achieve all these goals, since they work as thermal energy storage (TES), exploiting the latent heat absorbed during the solid-liquid phase change. This paper presents an experimental application of PCMs in the LCZ of a small solar pond. The paraffin wax was enclosed in aluminium cylinders which have been arranged on the bottom. The temperature of the solution in deep is monitored both with and without the PCM. The stability of the pond is analyzed through a laser shadowgraph technique, to visualize the effect of the thermal convection on the interfaces. Results show that the LCZ of the solar pond with PCM is around 3 °C colder than the reference case after a 6-h heating period. The shadowgraph analysis proves that the thermal convection in the reference case is stronger and damage the interface until break. The monitoring of the solar pond with PCM shows an improved stability.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · Solar Thermal and Photovoltaic Systems · Solar-Powered Water Purification Methods
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. Advances and prospects in thermal energy storage: a critical review10.1360/N972016-00663 ↗
2. Global prospects and challenges of latent heat thermal energy storage: a review
3. Novel strategies and supporting materials applied to shape-stabilize organic phase change materials for thermal energy storage–A review10.1016/j.apenergy.2018.11.017 ↗
4. Thermal conductivity enhancement of phase change materials for thermal energy storage: a review10.1016/j.rser.2010.08.007 ↗
5. Thermal conductivity enhancement on phase change materials for thermal energy storage: a review10.1016/j.ensm.2019.10.010 ↗
6. Heat extraction from salinity-gradient solar ponds using heat pipe heat exchangers10.1016/j.solener.2010.04.010 ↗
7. Stability of a small solar pond with different salt gradient layers10.1080/01430750.2017.1423381 ↗
8. Maintenance strategy for a salt gradient solar pond coupled with an evaporation pond10.1016/j.solener.2004.02.004 ↗
9. Tribological effects of nano-based engine oil diluted with biodiesel fuel10.1504/IJSURFSE.2017.082948 ↗
10. Blottiere · 2015
11. Evaporation suppression and solar energy collection in a salt-gradient solar pond10.1016/j.solener.2013.10.035 ↗
12. Transient modeling for the prediction of the temperature distribution with phase change material in a salt-gradient solar pond and comparison with experimental data10.1016/j.est.2019.101011 ↗
13. Experimental studies on the effect of using phase change material in salinity-gradient solar pond10.1016/j.solener.2015.07.053 ↗
14. Experimental studies on the effect of using phase change material in a salinity-gradient solar pond under a solar simulator10.1016/j.solener.2019.05.011 ↗
15. Experimental investigations on the performance of a solar pond by using encapsulated PCM with nanoparticles
16. A simple method to establish salt gradient solar ponds10.1016/0038-092X(80)90456-9 ↗