journal article·2021-10

Modified diatomite-based porous ceramic to develop shape-stabilized NaNO3 salt with enhanced thermal conductivity for thermal energy storage

Feng Jiang, Xiang Ling, Lingling Zhang, Daqiang Cang, Yulong Ding

Publisher page

Abstract

Abstract Low thermal conductivity and corrosion problem of NaNO3 salt-based phase change materials (PCMs) are regarded as two critical barriers for their applications in thermal energy storage. To address the above problem, a diatomite-based porous ceramic modified by CaCO3 was firstly used to develop shape-stabilized NaNO3 in this work. Particularly, contribution of modified diatomite-based ceramic on improving thermal conductivity of the composite was investigated. Compared with traditional diatomite-based skeleton, diatomite-based ceramic was found to contribute to a 129% higher thermal conductivity of composites, benefited by the generation of a dense and continuous skeleton that consisted of newly formed cristobalite phase with a higher thermal conductivity. While crack occurred on the composite with diatomite-based ceramic after 100 thermal cycles, resulting in the leakage of salt and the decrease of thermal conductivity. By contrast, diatomite-based ceramic modified by no more than 40 wt% CaCO3 effectively avoided the crack of composites, exhibiting quite a stability in shape and thermal conductivity during 500 thermal cycles. The modified ceramic was shown to improve the thermal conductivity of loaded NaNO3 by 118%, up to 1.22 W/(m·K) at 25 °C. The results also indicated that the modified ceramic hardly changed the phase transition temperature of NaNO3, but decreased the latent heat of composites, while possessed a much higher capacity to load salt (57 wt% NaNO3) than that of other porous ceramics. The composite with modified ceramic was demonstrated to have a good cycling stability in thermal properties as well, which performed a considerable potential in thermal energy storage.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Solar Thermal and Photovoltaic Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Phase change materials stabilized by porous metal supramolecular gels: gelation effect on loading capacity and thermal performance[J]10.1016/j.cej.2020.124806 ↗
2. Investigation on the performance of a high-temperature packed bed latent heat thermal energy storage system using Al-Si alloy[J]. Energy Conversion and Management
3. Review on thermal performances and applications of thermal energy storage systems with inorganic phase change materials[J]10.1016/j.energy.2018.09.128 ↗
4. Heat transfer of composite phase change material modules containing a eutectic carbonate salt for medium and high temperature thermal energy storage applications[J]10.1016/j.apenergy.2019.01.184 ↗
5. High temperature latent heat thermal energy storage: phase change materials, design considerations and performance enhancement techniques[J]10.1016/j.rser.2013.07.028 ↗
6. Physicochemical properties of ettringite/meta-ettringite for thermal energy storage: review[J]10.1016/j.solmat.2018.12.013 ↗
7. Sorption based long-term thermal energy storage – process classification and analysis of performance limitations: a review[J]. Renewable and Sustainable Energy Reviews
8. Hybrid heat transfer enhancement for latent-heat thermal energy storage systems: a review[J]10.1016/j.ijheatmasstransfer.2019.03.111 ↗
9. Experimental evaluation of the use of fins and metal wool as heat transfer enhancement techniques in a latent heat thermal energy storage system[J]. Energy Conversion and Management
10. Experimental investigation on cylindrically macro-encapsulated latent heat storage for space heating applications[J]. Energy Conversion and Management
11. Thermal energy storage: “How previous findings determine current research priorities”[J]10.1016/j.energy.2012.01.024 ↗
12. Heat transfer characteristics of thermal energy storage system using PCM capsules: a review[J]10.1016/j.rser.2007.06.009 ↗
13. High-temperature phase change materials for thermal energy storage[J]10.1016/j.rser.2009.11.011 ↗
14. The preparation and properties of multi-component molten salts[J]10.1016/j.apenergy.2009.06.022 ↗
15. Novel low melting point quaternary eutectic system for solar thermal energy storage[J]10.1016/j.apenergy.2012.09.001 ↗
16. Thermal energy storage using chloride salts and their eutectics[J]10.1016/j.applthermaleng.2016.07.046 ↗
17. Enhanced thermal performance of lithium nitrate phase change material by porous copper oxide nanowires integrated on folded meshes for high temperature heat storage[J]10.1016/j.cej.2019.123613 ↗
18. Corrosion behavior of nickel-based superalloys in thermal storage medium of molten eutectic NaCl-MgCl2 in atmosphere[J]10.1016/j.solmat.2017.02.020 ↗
19. Novel Na2SO4-NaCl-ceramic composites as high temperature phase change materials for solar thermal power plants (Part I)[J]10.1016/j.solmat.2017.12.034 ↗
20. Enhanced thermal conductivity of ternary carbonate salt phase change material with Mg particles for solar thermal energy storage[J]10.1016/j.apenergy.2017.07.027 ↗
21. A novel low-temperature fabrication approach of composite phase change materials for high temperature thermal energy storage[J]10.1016/j.apenergy.2018.12.072 ↗
22. Preparation and thermal properties of porous heterogeneous composite phase change materials based on molten salts/expanded graphite[J]10.1016/j.solener.2014.05.019 ↗
23. Numerical investigation of the thermal performance enhancement of latent heat thermal energy storage using longitudinal rectangular fins and flat micro-heat pipe arrays[J]
24. Diatomite-based porous ceramics with high apparent porosity: pore structure modification using calcium carbonate[J]10.1016/j.ceramint.2018.12.082 ↗
25. Review on clay mineral-based form-stable phase change materials: preparation, characterization and applications[J]10.1016/j.rser.2016.10.014 ↗
26. Experimental study on thermal properties and thermal performance of eutectic hydrated salts/expanded perlite form-stable phase change materials for passive solar energy utilization[J]10.1016/j.solmat.2018.08.012 ↗
27. Study on preparation and thermal properties of binary fatty acid/diatomite shape-stabilized phase change materials[J]10.1016/j.solmat.2011.04.017 ↗
28. Micro encapsulated & form-stable phase change materials for high temperature thermal energy storage[J]10.1016/j.apenergy.2018.02.064 ↗
29. Sodium nitrate – diatomite composite materials for thermal energy storage[J]10.1016/j.solener.2017.03.003 ↗
30. Diatomite: a promising natural candidate as carrier material for low, middle and high temperature phase change material[J]10.1016/j.enconman.2015.03.071 ↗
31. Effects of carrier on characteristics of NaNO3/diatomite composite phase change materials for thermal energy storage
32. Recent progress in diatomite based composite phase change materials for thermal energy storage
33. Thermal conductivity of amorphous SiO2 thin film: a molecular dynamics study[J]
34. Thermal conductivity accumulation in amorphous silica and amorphous silicon[J]10.1103/PhysRevB.89.144303 ↗
35. Jiang · 2019 · 109539
36. Thermal conductivity of cristobalite[J]10.1111/j.1151-2916.1972.tb13442.x ↗
37. A form stable composite phase change material for thermal energy storage applications over 700 degrees C[J]
38. Viscosity and thermal conductivity equations for nitrogen, oxygen, argon, and air[J]10.1023/B:IJOT.0000022327.04529.f3 ↗
39. Effects of the improvement in thermal conductivity coefficient by nano-wollastonite on physical and mechanical properties in medium-density fiberboard (MDF)[J]10.15376/biores.9.3.4138-4149 ↗
40. Synthesis and characterization of calcium silicate insulating material using avian eggshell waste[J]10.1016/j.ceramint.2016.12.146 ↗
41. Molten salts/ceramic-foam matrix composites by melt infiltration method as energy storage material[J]10.1007/s11595-009-4651-2 ↗
42. Porous ceramic stabilized phase change materials for thermal energy storage[J]10.1039/C6RA06503A ↗