Development of TOPCon tunnel-IBC solar cells with screen-printed fire-through contacts by laser patterning
Source abstract
Abstract
Abstract Interdigitated back contact (IBC) solar cells featuring passivated contacts are promising candidates to achieve record-efficiency single-junction silicon-based solar cells. However, they usually require processes that are not amenable for industrial mass production and involve great process complexity associated with patterning and alignment. In this work, we present a novel TOPCon tunnel-IBC solar cell architecture, minimizing the complexity of patterning and alignment. By adopting a local poly-Si(n+)/poly-Si(p+)/SiOx tunnel junction, this cell architecture only requires full-area deposition of various thin-film layers and is compatible with conventional fire-through screen printing. The cell architecture is realized by sequential laser patterning steps and hence no shadow masks are needed. As a critical building block, we develop a working poly-Si(n+)/(SiOx)/poly-Si(p+)/SiOx tunnel junction with implied open-circuit voltage of 727 mV and a tunnel resistivity of 0.52 Ω cm2. We also establish the required laser patterning and damage-removal processes. Finally, we demonstrate that both the electron-selective and hole-selective regions can be contacted by conventional high-temperature fire-through screen printing, hence being compatible with industrial solar cell processing. Using realistic input parameters measured on test samples, we demonstrate by computer simulation that the proposed TOPCon tunnel-IBC cells favour IBC geometry with small pitches up to the technological limit. Corresponding full device integration is currently ongoing.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Integrated Circuits and Semiconductor Failure Analysis · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Silicon solar cells with total area efficiency above 25 %
2. Hutchins
3. 24.58% total area efficiency of screen-printed, large area industrial silicon solar cells with the tunnel oxide passivated contacts (i-TOPCon) design10.1016/j.solmat.2019.110258 ↗
4. Silicon heterojunction solar cell with interdigitated back contacts for a photoconversion efficiency over 26%10.1038/nenergy.2017.32 ↗
5. Laser contact openings for local poly-Si-metal contacts enabling 26.1%-efficient POLO-IBC solar cells10.1016/j.solmat.2018.06.020 ↗
6. Paviet-Salomon · 2019
7. Interdigitated back contact silicon heterojunction solar cells featuring an interband tunnel junction enabling simplified processing10.1016/j.solener.2018.01.066 ↗
8. Double-sided passivated contacts for solar cell applications: an industrially viable approach toward 24% efficient large area silicon solar cells
9. Approaching 23% with large-area monoPoly cells using screen-printed and fired rear passivating contacts fabricated by inline PECVD10.1002/pip.3097 ↗
10. monoPoly™ cells: large-area crystalline silicon solar cells with fire-through screen printed contact to doped polysilicon surfaces10.1016/j.solmat.2018.05.059 ↗
11. Development of close-to-zero damage rear heterojunction stripe contacts and compatible front metallization approaches for hybrid heterojunction solar cells
12. Ultra-thin atomic layer deposited aluminium oxide tunnel layer passivated hole-selective contacts for silicon solar cells10.1016/j.solmat.2018.11.011 ↗
13. Passivating and low-resistive poly-Si tunneling junction enabling high-efficiency monolithic perovskite/silicon tandem solar cells10.1063/1.5120552 ↗
14. p+/n+ polysilicon-on-oxide tunneling junctions as an interface of p-type PERC cells for tandem applications
15. Voltage loss analysis for bifacial silicon solar cells: case for two-dimensional large-area modeling10.1109/JPHOTOV.2016.2598261 ↗
16. A systematic loss analysis method for rear-passivated silicon solar cells10.1109/JPHOTOV.2014.2388071 ↗
17. Investigating industrial metallization solutions for double-side contact passivated bipole solar cells
18. Characterization of screen printed and fire-through contacts on LPCVD based passivating contacts in monoPoly™ solar cells10.1016/j.solener.2020.03.087 ↗
19. Investigation of 23% monoPoly screen-printed silicon solar cells with an industrial rear passivated contact
20. PV Lighthouse: SunSolve. Available: https://www.pvlighthouse.com.au/sunsolve.
21. R. E. P. Papet, B. Bram Sadlik, Y. Andrault, D. Bätzner, D. Lachenal, B. Strahm, G. Wahli, F. Wuensch, W. Frammelsberger, W. Stein, L. Rubin, W. Schmutz, A. Buechel, B. Rau, "19% efficiency module based on Roth & Rau heterojunction solar cells and Day 4TM energy module concept," in 26th European Photovoltaic Solar Energy Conference and Exhibition, Hamburg, Germany.
22. Dielectric surface passivation for silicon solar cells: a review10.1002/pssa.201700293 ↗