journal article·2020-10

Nitrate based nanocomposite thermal storage materials: Understanding the enhancement of thermophysical properties in thermal energy storage

Yue Zhang, Jinli Li, Lin Gao, Min Wang

Publisher page

Abstract

Abstract Molten salt is considered to be a significant medium of thermal energy storage (TES) used for concentrating solar power (CSP). Reasonably improving its thermophysical properties can realize the efficient utilization of solar energy. To investigate the effect of nanoparticle-doped molten salt, adding two size nano-alumina (NA, NA1 and NA2) with different content to solar salt (SS, with 60:40 ratio) by high temperature melting method. The using temperature zone had been broadened. For the same system, the specific heat (cp) of the solid was higher than that of the liquid. The maximum cp values in liquid of both systems appeared at the NA content of 0.5 wt%, corresponding to 1.71 J g−1K−1 and 1.84 J g−1K−1, respectively, which increased by 9.62% and 17.95% compared with the pure SS. Due to the high specific surface areas of NA1 and NA2, which were 151.3 m2 g−1 and 177.04 m2 g−1, respectively. And the higher surface tension (γ) of NA2-SS, which had a higher surface energy to improve the cp nanocomposites. The thermal conductivity (λ) increased with the content of NAs, increasing by 2.27% and 4.28%, respectively when the content of two NAs was 0.5 wt%. The content of NAs had little effect on viscosity (η). As a nitrate-based nanocomposite thermal storage material, it has great application prospects in TES, owing to its high cp and λ, widened operating temperature range and reliability.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Solar Thermal and Photovoltaic Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (62)

Show source-provided references
1. Effect of Al2O3 nanoparticle dispersion on the specific heat capacity of a eutectic binary nitrate salt for solar power applications10.1016/j.enconman.2017.03.062 ↗
2. The emergence of solar thermal utilization: solar-driven steam generation10.1039/C7TA01361B ↗
3. Solar steam generation based on the photothermal effect: from designs to applications, and beyond10.1039/C9TA05935K ↗
4. State of the art on high temperature thermal energy storage for power generation. Part 1-Concepts, materials and modellization10.1016/j.rser.2009.07.035 ↗
5. A review on global solar energy policy10.1016/j.rser.2011.01.007 ↗
6. A review of solar thermal technologies☆10.1016/j.rser.2009.07.014 ↗
7. Effect of nanoparticle dispersion on specific heat capacity of a binary nitrate salt eutectic for concentrated solar power applications10.1016/j.ijthermalsci.2013.02.003 ↗
8. Heat transfer enhancement and performance of the molten salt receiver of a solar power tower10.1016/j.apenergy.2009.04.042 ↗
9. Experimental study on the specific heat and stability of molten salt nanofluids prepared by high-temperature melting10.1016/j.solmat.2017.11.021 ↗
10. A review of solar collectors and thermal energy storage in solar thermal applications10.1016/j.apenergy.2012.11.051 ↗
11. Multi-walled carbon nanotubes added to Na2CO3/MgO composites for thermal energy storage10.1016/j.partic.2013.05.001 ↗
12. Enhancing thermal conductivity of fluids with nanoparticles
13. Measuring thermal conductivity of fluids containing oxide nanoparticles10.1115/1.2825978 ↗
14. Anomalously increased effective thermal conductivities of ethylene glycol-based nanofluids containing copper nanoparticles10.1063/1.1341218 ↗
15. Empirical correlation finding the role of temperature and particle size for nanofluid (Al2O3) thermal conductivity enhancement10.1063/1.2093936 ↗
16. Specific heat measurement of three nanofluids and development of new correlations10.1115/1.3090813 ↗
17. Enhanced specific heat of silica nanofluid10.1115/1.4002600 ↗
18. Thermal conductivity and specific heat capacity measurements of Al2O3 nanofluids10.1007/s10973-012-2534-9 ↗
19. Specific heat capacity of molten salt-based alumina nanofluid10.1186/1556-276X-8-292 ↗
20. Mechanical dispersion of nanoparticles and its effect on the specific heat capacity of impure binary nitrate salt mixtures10.3390/nano5031136 ↗
21. Experimental investigation of the specific heat of a nitrate–alumina nanofluid for solar thermal energy storage systems10.1016/j.ijthermalsci.2015.01.012 ↗
22. Mechanisms of heat flow in suspensions of nano-sized particles (nanofluids)10.1016/S0017-9310(01)00175-2 ↗
23. Role of Brownian motion in the enhanced thermal conductivity of nanofluids10.1063/1.1756684 ↗
24. Enhanced thermal conductivity of TiO2-water based nanofluids10.1016/j.ijthermalsci.2004.12.005 ↗
25. Review and comparison of nanofluid thermal conductivity and heat transfer enhancements10.1080/01457630701850851 ↗
26. Fabrication and characterization of CaCl2·6H2O composite phase change material in the presence of CsxWO3 nanoparticles10.1016/j.solmat.2019.110034 ↗
27. Solar salt doped by MWCNTs as a promising high thermal conductivity material for CSP10.1039/C8RA03019G ↗
28. Enhanced thermal conductivity and specific heat capacity of carbon nanotubes ionanofluids10.1016/j.ijthermalsci.2012.03.010 ↗
29. The effect of nanoparticle morphology on the specific heat of nanosalts10.1016/j.ijheatmasstransfer.2015.11.064 ↗
30. Characterization of molten salt doped with different size nanoparticles of Al2O310.1002/er.4531 ↗
31. Experimental study on thermophysical properties of molten salt nanofluids prepared by high-temperature melting10.1016/j.solmat.2018.11.003 ↗
32. Optimal concentration of alumina nanoparticles in molten Hitec salt to maximize its specific heat capacity10.1016/j.ijheatmasstransfer.2013.10.078 ↗
33. Heat capacity of nanofluids for solar energy storage produced by dispersing oxide nanoparticles in nitrate salt mixture directly at high temperature10.1016/j.solmat.2017.04.011 ↗
34. Enhancement of specific heat capacity of high-temperature silica-nanofluids synthesized in alkali chloride salt eutectics for solar thermal-energy storage applications10.1016/j.ijheatmasstransfer.2010.11.017 ↗
35. Enhancement of molar heat capacity of nanostructured Al2O310.1023/A:1012514216429 ↗
36. Phase change materials for thermal energy storage10.1016/j.pmatsci.2014.03.005 ↗
37. Concentrated solar power on demand10.1016/j.solener.2011.04.010 ↗
38. Effect of nanoparticle dispersion on enhancing the specific heat capacity of quaternary nitrate for solar thermal energy storage application10.1016/j.solmat.2016.07.046 ↗
39. Measurement and model validation of nanofluid specific heat capacity with differential scanning calorimetry
40. Viscosity of binary mixtures of molten nitrates as a function of ionic radius-II*10.1016/0013-4686(69)87037-4 ↗
41. Effect of SiO2 nanoparticles on specific heat capacity of low-melting-point eutectic quaternary nitrate salt10.1016/j.solmat.2018.01.014 ↗
42. Increment of specific heat capacity of solar salt with SiO2 nanoparticles10.1186/1556-276X-9-582 ↗
43. Thermal energy storage enhancement of a binary molten salt via in-situ produced nanoparticles10.1016/j.ijheatmasstransfer.2016.09.004 ↗
44. Enhanced specific heat capacity of high-temperature molten salt-based nanofluids10.1016/j.ijheatmasstransfer.2012.10.062 ↗
45. Surface energy, relative stability, and structural properties of Au-Pt, Au-Rh, Au-Cu, and Au-Pd nanoclusters created in inert-gas condensation process using MD simulation10.1016/j.jpcs.2020.109480 ↗
46. An efficient route to aqueous phase synthesis of nanocrystalline gamma-Al2O3 with high porosity: from stable boehmite colloids to large pore mesoporous alumina10.1016/j.jcis.2011.08.087 ↗
47. Study of the preparation of γ-Al2O3 nano-structured hierarchical hollow microspheres with a simple hydrothermal synthesis using methylene blue as structure directing agent and their adsorption enhancement for the dye10.1016/j.cej.2015.02.020 ↗
48. Study of heat capacity enhancement in some nanostructured materials10.1351/PAC-CON-08-09-15 ↗
49. Molecular dynamics simulation of solar salt (NaNO3-KNO3) mixtures10.1016/j.solmat.2019.04.019 ↗
50. Enhanced heat capacity of binary nitrate eutectic salt-silica nanofluid for solar energy storage10.1016/j.solmat.2018.12.019 ↗
51. Kapitza resistance10.1103/RevModPhys.41.48 ↗
52. Teja · 2008
53. Bradshaw, R.W. Mon. Viscosity of multi-component molten nitrate salts-liquidus to 200°C. United States. https://doi.org/10.2172/983680..
54. Accurate viscosity measurement of nitrates/nitrites salts for concentrated solar power10.1016/j.solener.2016.08.037 ↗
55. Size effect of nanoparticle on specific heat in a ternary nitrate (LiNO3-NaNO3-KNO3) salt eutectic for thermal energy storage10.1016/j.applthermaleng.2016.03.134 ↗
56. Numerical investigation of the effect of interfacial thermal resistance upon the thermal conductivity of copper/diamond composites10.1016/j.matdes.2015.07.059 ↗
57. A new phase change material based on potassium nitrate with silica and alumina nanoparticles for thermal energy storage10.1186/s11671-015-0984-2 ↗
58. Lattice strain estimation for CoAl2O4 nano particles using Williamson-Hall analysis10.1016/j.jallcom.2016.03.213 ↗
59. Microstructure evolution and grain size distribution in nanocrystalline FeNbBCu from synchrotron XRD and TEM analysis10.1016/j.jnoncrysol.2011.09.003 ↗
60. Raman studies of sol-gel alumina: finite-size effects in nanocrystalline AlO(OH)10.1103/PhysRevB.48.15626 ↗
61. Raman spectra and ionic interactions in molten nitrates10.1063/1.1731994 ↗
62. Development of low-melting point molten salts and detection of solid-toliquid transitions by alternative techniques to DSC10.1016/j.solmat.2019.110107 ↗