Improving surface passivation on very thin substrates for high efficiency silicon heterojunction solar cells
Source abstract
Abstract
Abstract Silicon solar cells are now less than 3% absolute from the theoretical efficiency limit. Advanced passivated contact architectures have demonstrated surface saturation current densities close to 1 fA/cm2. We have optimized the thin intrinsic hydrogenated amorphous silicon layer by controlling the deposition temperature and the silane-to-hydrogen dilution ratio. Thin wafers were used as a testbed to increase the sensitivity to surface passivation. By optimizing the intrinsic layer, we reduced the surface saturation current densities from 1.7 fA/cm2 to 0.6 fA/cm2 on textured wafers with thicknesses ranging between 40 and 180 μm. Implied open-circuit voltages over 760 mV were accomplished on p-i/c-Si/i-n structures deposited on n-type CZ wafers with wafer thicknesses below 50 μm. Further, we demonstrated experimentally the potential of using very thin wafers by manufacturing screen-printed silicon heterojunction solar cells on 40 μm thick standalone wafers while achieving an efficiency of 20.48%.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. A cost roadmap for silicon heterojunction solar cells10.1016/j.solmat.2015.12.026 ↗
2. Trube · 2018
3. Passivated rear contacts for high-efficiency n-type Si solar cells providing high interface passivation quality and excellent transport characteristics10.1016/j.solmat.2013.09.017 ↗
4. Silicon solar cells with total area efficiency above 25 %
5. 26.1%-efficient POLO-IBC cells: quantification of electrical and optical loss mechanisms10.1002/pip.3098 ↗
6. Silicon heterojunction solar cell with interdigitated back contacts for a photoconversion efficiency over 26%10.1038/nenergy.2017.32 ↗
7. Solar cell efficiency tables (Version 53)10.1002/pip.3102 ↗
8. On effective surface recombination parameters10.1063/1.4886595 ↗
9. Impact of substrate thickness on the surface passivation in high performance n-type solar cells
10. Revisiting thin silicon for photovoltaics: a technoeconomic perspective10.1039/C9EE02452B ↗
11. Building integrated photovoltaics (BIPV): review, potentials, barriers and myths
12. A critical review of electric vehicle charging using solar photovoltaic: a critical review of PV-EV charging10.1002/er.3472 ↗
13. Danel · 2018 · 444
14. Potential of very thin and high‐efficiency silicon heterojunction solar cells10.1002/pip.3181 ↗
15. High-efficiency HIT solar cells with a very thin structure enabling a high Voc
16. 24.7% record efficiency HIT solar cell on thin silicon wafer10.1109/JPHOTOV.2013.2282737 ↗
17. Radhakrishnan · 2020 · 5
18. Freestanding and supported processing of sub-70 μm kerfless epitaxial Si and thinned Cz/FZ Si foils into solar cells: an overview of recent progress and challenges10.1016/j.solmat.2019.110108 ↗
19. Analysis of the recombination mechanisms of a silicon solar cell with low bandgap-voltage offset10.1063/1.4984071 ↗
20. High-efficiency amorphous silicon solar cells: impact of deposition rate on metastability10.1063/1.4907001 ↗
21. High-efficiency silicon heterojunction solar cells: a review10.1515/green-2011-0018 ↗
22. Herasimenka · 2013 · 1943
23. Hydrogen plasma treatments for passivation of amorphous-crystalline silicon-heterojunctions on surfaces promoting epitaxy10.1063/1.4798292 ↗
24. Hydrogenated amorphous silicon film as intrinsic passivation layer deposited at various temperatures using RF remote-PECVD technique10.1016/j.cap.2009.11.059 ↗
25. Optimisation of intrinsic a-Si:H passivation layers in crystalline-amorphous silicon heterojunction solar cells10.1016/j.egypro.2012.02.013 ↗
26. Microstructure and the light-induced metastability in hydrogenated amorphous silicon10.1063/1.99089 ↗
27. Role of hydrogen bonding environment in a-Si:H films for c-Si surface passivation10.1116/1.2897929 ↗
28. Mathematical evaluation of a-Si:H film formation in rf-PECVD systems10.1007/s12633-019-00167-9 ↗
29. Multiscale modeling and operation of PECVD of thin film solar cells10.1016/j.ces.2015.02.027 ↗
30. Absorption strengths of Si-H vibrational modes in hydrogenated silicon10.1557/PROC-507-601 ↗
31. Infrared spectrum and structure of hydrogenated amorphous silicon10.1002/pssb.2221000103 ↗
32. Relation of the Si H stretching frequency to the nanostructural Si H bulk environment
33. Vacancies and voids in hydrogenated amorphous silicon10.1063/1.1559657 ↗
34. Improved quantitative description of Auger recombination in crystalline silicon
35. Increased reliability for J0-analysis by QSSPC10.1016/j.egypro.2014.08.087 ↗
36. ITO/SiOx:H stacks for silicon heterojunction solar cells10.1016/j.solmat.2016.05.024 ↗
37. Indium tin oxide sputtering damage to catalytic chemical vapor deposited amorphous silicon passivation films and its recovery10.1016/j.tsf.2017.01.021 ↗
38. Analysis of series resistance losses in a-Si:H/c-Si heterojunction solar cells10.1109/JPHOTOV.2014.2328575 ↗
39. Numerical quantification and minimization of perimeter losses in high-Efficiency silicon solar cells10.1002/(SICI)1099-159X(199609/10)4:5<355::AID-PIP145>3.0.CO;2-X ↗
40. Dependence of coil sensitivity on sample thickness in inductively coupled photoconductance measurements10.1063/1.5123807 ↗
41. Contactless determination of current–voltage characteristics and minority‐carrier lifetimes in semiconductors from quasi‐steady‐state photoconductance data10.1063/1.117723 ↗