journal article·2020-06

Efficient flexible Mo foil-based Cu2ZnSn(S, Se)4 solar cells from In-doping technique

Xue Yu, Shuying Cheng, Qiong Yan, Junjie Fu, Hongjie Jia, Quanzhen Sun, Zhiyuan Yang, Sixin Wu

Publisher page

Abstract

Abstract Cation substitution has an important impact on the power conversion efficiency (PCE) of Cu2ZnSn(S,Se)4 (CZTSSe) solar cells. Herein, a significant PCE enhancement of flexible indium-doped CZTSSe solar cells has been achieved by partially substituting Sn4+ with In3+. Systematic measurements indicate that In doping in CZTSSe film effectively improves the crystallinity and carrier concentration of the absorber layer. Meanwhile, the treatment reduces interface recombination and band tailing by passivating deep defects and increases the open-circuit voltage (Voc) of the solar cells. By physical analysis, the key parameters for the solar cell diode such as A, J0, Rs and Rsh are significantly improved after In-doping, indicating better PN junction quality. Under the optimal In-doping (x = In/(Sn + In) = 9%), the flexible Cu2ZnSn1-xInx(S,Se)4 solar cell has been successfully obtained with the best efficiency of 7.19% and the Voc enhancement of 62 mV due to reduced Voc deficit and band tailing.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Cu2ZnSnS4 thin films generated from a single solution based precursor: the effect of Na and Sb doping10.1021/acs.chemmater.6b01499 ↗
2. Solution-Processed highly efficient Cu2ZnSnSe4 thin film solar cells by dissolution of elemental Cu, Zn, Sn, and Se powders10.1021/am5064926 ↗
3. Mitzi · 2013 · vol.371 · 20110432
4. Pure sulfide Cu2ZnSnS4 thin film solar cells fabricated by preheating an electrodeposited metallic stack10.1002/aenm.201301381 ↗
5. The path towards a high-performance solution-processed kesterite solar cell10.1016/j.solmat.2010.11.028 ↗
6. Cation substitution in earth-abundant kesterite photovoltaic materials
7. Wide band gap kesterite absorbers for thin film solar cells: potential and challenges for their deployment in tandem devices10.1039/C9SE00266A ↗
8. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
9. Flexible Cu2ZnSn(S,Se)4 solar cells with over 10% efficiency and methods of enlarging the cell area10.1038/s41467-019-10890-x ↗
10. The alterations of carrier separation in kesterite solar cells10.1016/j.nanoen.2018.07.039 ↗
11. Classification of lattice defects in the kesterite Cu2ZnSnS4 and Cu2ZnSnSe4 earth-abundant solar cell absorbers10.1002/adma.201203146 ↗
12. Tian · 2018
13. Photovoltaic materials and devices based on the alloyed kesterite absorber (AgxCu1-x)2ZnSnSe410.1002/aenm.201502468 ↗
14. Defect engineering in multinary earth-abundant chalcogenide photovoltaic materials10.1002/aenm.201602366 ↗
15. Engineering solar cell absorbers by exploring the band Alignment and defect disparity: the case of Cu- and Ag-based kesterite compounds10.1002/adfm.201502272 ↗
16. Efficient (Cu1−xAgx)2ZnSn(S,Se)4 solar cells on flexible Mo foils10.1039/C8RA04958K ↗
17. Chemical insights into the instability of Cu2ZnSnS4 films during annealing10.1021/cm202379s ↗
18. Improvement of voltage deficit of Ge-incorporated kesterite solar cell with 12.3% conversion efficiency
19. Progress and perspectives of thin film kesterite photovoltaic technology: a critical review10.1002/adma.201806692 ↗
20. High efficiency Cu2ZnSn (S, Se) 4 solar cells by applying a double In2S3/CdS emitter10.1002/adma.201402373 ↗
21. Precise-tuning the in content to achieve high fill factor in hybrid buffer structured Cu2ZnSn(S, Se)4 solar cells10.1016/j.solener.2017.03.082 ↗
22. Effect of Indium doping on the photoelectrochemical and photocatalytic properties of zinc sulphide10.1016/j.mseb.2017.09.007 ↗
23. The effect of multisubstitution on the thermoelectric properties of chalcogenide-based Cu2.1Zn0.9Sn1-xInxSe4 (0 <= x <= 0.1)
24. Electrical conduction and mobility enhancement in p-type In-doped Cu2ZnSnSe4 bulks10.7567/JJAP.53.035801 ↗
25. Thermoelectric properties of tetrahedrally bonded wide-gap stannite compounds Cu2ZnSn1-xInxSe410.1063/1.3103604 ↗
26. Determination of impurities in high-purity selenium by inductively coupled plasma mass spectrometry after matrix separation with thiourea10.2116/analsci.11.115 ↗
27. High flexible Cu2ZnSn(S,Se)4 solar cells by green solution-process10.1016/j.solener.2018.11.030 ↗
28. Earth-abundant and low-cost CZTS solar cell on flexible molybdenum foil10.1039/C4RA02064B ↗
29. Behavior of indium alloying with Cu2ZnSn(S,Se)4 and its effect on performances of Cu2ZnSn(S,Se)4-based solar cell10.1016/j.jallcom.2018.07.129 ↗
30. Resonant Raman scattering of ZnSxSe1−x solid solutions: the role of S and Se electronic states10.1039/C5CP04498G ↗
31. Tailoring the defects and carrier density for beyond 10% efficient CZTSe thin film solar cells10.1016/j.solmat.2016.09.034 ↗
32. Model for electronic transport in Cu(In,Ga)Se2 solar cells10.1002/(SICI)1099-159X(199811/12)6:6<407::AID-PIP230>3.0.CO;2-U ↗
33. Improvement of the photovoltaic performance of Cu2ZnSn(SxSe1−x)4 solar cells by adding polymer in the precursor solution10.1088/1361-6463/aaab38 ↗
34. Characterization of defects in 9.7% efficient Cu2ZnSnSe4-CdS-ZnO solar cells10.1063/1.4826448 ↗
35. Efficiency limiting factors in Cu(In,Ga)Se2 thin film solar cells prepared by Se-free rapid thermal annealing of sputter-deposited Cu-In-Ga-Se precursors