Cellular automata simulation on the corrosion behavior of Ni-base alloy in chloride molten salt
Source abstract
Abstract
Abstract Chloride molten salt is required to study its corrosion behavior since it is recommended to be used as heat transfer and heat storage material in high-temperature thermal power generation system. In this paper, a simplify model was established by the reaction of diffusive corrosive gas and metal substrate in a chloride molten salt. A cellular automaton model based on the stochastic approach is adopted to simulate the uniform corrosion and the migration of metallic element. The corrosion behavior is also simulated considering the practical working condition, such as oxygen, moisture and so on. By comparing the simulation results with experimental data, it proves that the cellular automata simulation is an effective alternative method to describe the high-temperature corrosion process of molten salts. Simulation results of 25,000 time steps is taken as a comparison of the 21-day corrosion which reflects the Cr distribution, and the growth of corrosion layer with the migration of Cr element was reproduced. The change of corrosion layer thickness is similar to the mass loss. The simulation method provides insight on the distribution of corrosion products, corrosion kinetics and morphologies for the long-term application.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · Solidification and crystal growth phenomena
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. Corrosion behavior of 316SS and Ni-based alloys in a ternary NaCl-KCl-MgCl2 molten salt10.1016/j.solener.2018.06.094 ↗
2. Effects of alloying elements on the corrosion behavior of Ni-based alloys in molten NaCl-KCl-MgCl2 salt at different temperatures10.1016/j.corsci.2018.08.021 ↗
3. Hot corrosion behavior of commercial alloys in thermal energy storage material of molten MgCl 2/KCl/NaCl under inert atmosphere10.1016/j.solmat.2018.04.025 ↗
4. Corrosion behavior of Ni-based alloys in molten NaCl-CaCl 2 -MgCl 2 eutectic salt for concentrating solar power10.1016/j.solmat.2017.05.050 ↗
5. Corrosion behavior of nickel-based superalloys in thermal storage medium of molten eutectic NaCl-MgCl 2 in atmosphere10.1016/j.solmat.2017.02.020 ↗
6. Stochastic approach to pitting-corrosion-extreme modelling in low-carbon steel10.1016/j.corsci.2009.11.011 ↗
7. Cellular automaton modeling on the corrosion/oxidation mechanism of steel in liquid metal environment10.1016/j.pnucene.2007.11.044 ↗
8. Fractional reaction order kinetics in electrochemical systems involving single-reactant, bimolecular desorption reactions10.1016/j.jelechem.2003.06.004 ↗
9. 3D cellular automata simulations of intra and intergranular corrosion10.1016/j.corsci.2016.07.028 ↗
10. Computational simulation of corrosion pit interactions under mechanochemical effects using a cellular automaton/finite element model10.1016/j.corsci.2015.11.034 ↗
11. Modeling pitting corrosion by means of a 3D discrete stochastic model10.1016/j.corsci.2014.01.010 ↗
12. Simulations of diffusion limited corrosion at the metal|environment interface10.1016/j.jelechem.2003.09.017 ↗
13. Simulations of film growth and diffusion during the corrosion process10.1016/S0022-0728(00)00433-2 ↗
14. Simulation of the growth of oxide layer of stainless steels with chromium using cellular automaton model: verification and parameter study10.1016/j.commatsci.2013.04.037 ↗
15. Numerical analysis of high temperature internal corrosion mechanisms by the cellular automata approach10.1002/maco.201307179 ↗
16. A randomwalk-cellular automaton model of precipitation of internal oxides10.1016/S1359-6462(97)00300-X ↗
17. Cellular automata modeling of physical systems