journal article·2019-11

Impact of P3HT materials properties and layer architecture on OPV device stability

Rico Meitzner, Tobias Faber, Shahidul Alam, Aman Amand, Roland Roesch, Mathias Büttner, Felix Herrmann-Westendorf, Martin Presselt, Laura Ciammaruchi, Iris Visoly-Fisher, Sjoerd Veenstra, Amaia Diaz de Zerio, Xiaofeng Xu, Ergang Wang, Christian Müller, Pavel Troshin, Martin D. Hager, Sandra Köhn, Michal Dusza, Miron Krassas, Simon Züfle, E. Kymakis, Eugene A. Katz, Solenn Berson, Filip Granek, Matthieu Manceau, Francesca Brunetti, Giuseppina Polino, Ulrich S. Schubert, Monica Lira-Cantu, Harald Hoppe

Publisher page

Abstract

We report a cooperative study conducted between different laboratories to investigate organic solar cell degradation with respect to P3HT material properties and different solar cell architectures. Various batches of P3HT were collected from different suppliers reflecting commercial availability as well as properties variability. Among the materials properties explicitly considered were the molar mass, dispersity, regio-regularity, impurities by trace metals and intrinsic doping evaluated from radical concentrations. Each of the participating laboratories contributing test devices applied their own layer stack, i.e. their own device architecture and layout. This variation was appreciated as another parameter for evaluation. Even though a large amount of devices failed due to extrinsic degradation effects, indeed, some materials properties were found to be more important than others for obtaining long lifetimes and high stability of P3HT-based polymer solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Molecular optimization enables over 13% efficiency in organic solar cells10.1021/jacs.7b02677 ↗
2. Ternary organic solar cells offer 14% power conversion efficiency10.1016/j.scib.2017.11.003 ↗
3. Progress in understanding degradation mechanisms and improving stability in organic photovoltaics10.1002/adma.201603940 ↗
4. Polymer solar cells with enhanced lifetime by improved electrode stability and sealing10.1016/j.solmat.2013.05.013 ↗
5. High efficiency polymer solar cells with long operating lifetimes10.1002/aenm.201100138 ↗
6. Improving, characterizing and predicting the lifetime of organic photovoltaics10.1088/1361-6463/50/10/103001 ↗
7. Burn-in free nonfullerene-based organic solar cells10.1002/aenm.201700770 ↗
8. Baselines for lifetime of organic solar cells10.1002/aenm.201600910 ↗
9. Fundamentals of bulk heterojunction organic solar cells: an overview of stability/degradation issues and strategies for improvement10.1016/j.rser.2017.12.008 ↗
10. Interlaboratory outdoor stability studies of flexible roll-to-roll coated organic photovoltaic modules: stability over 10,000 h10.1016/j.solmat.2013.04.024 ↗
11. Procedures and practices for evaluating thin-film solar cell stability10.1002/aenm.201501407 ↗
12. Consensus stability testing protocols for organic photovoltaic materials and devices10.1016/j.solmat.2011.01.036 ↗
13. An efficient, “burn in” free organic solar cell employing a nonfullerene electron acceptor10.1002/adma.201701156 ↗
14. Oxygen- and water-induced degradation of an inverted polymer solar cell: the barrier effect10.1117/1.3544010 ↗
15. Stability of organic solar cells: challenges and strategies10.1039/C5CS00593K ↗
16. Lifetimes of organic photovoltaics: using TOF-SIMS and 18O 2 isotopic labelling to characterise chemical degradation mechanisms10.1016/j.solmat.2005.03.004 ↗
17. Photo-oxidation and ozonization of poly(3-hexylthiophene) thin films as studied by UV VIS and photoelectron spectroscopy10.1016/j.polymdegradstab.2010.02.004 ↗
18. Inverted bulk-heterojunction organic photovoltaic device using a solution-derived ZnO underlayer10.1063/1.2359579 ↗
19. Effect of temperature on the morphological and photovoltaic stability of bulk heterojunction polymer:fullerene solar cells10.1016/j.solmat.2008.01.006 ↗
20. Insights into the stability and thermal degradation of P3HT:C60 blended films for solar cell applications10.1007/s10853-011-5408-9 ↗
21. Toward stabilization of domains in polymer bulk heterojunction films10.1021/cm1018184 ↗
22. Light-induced degradation of the P3HT-based solar cells active layer10.1016/j.solmat.2010.09.021 ↗
23. Photochemical stability of π-conjugated polymers for polymer solar cells: a rule of thumb10.1039/c0jm03105d ↗
24. Effects of long-term UV-Visible light irradiation in the absence of oxygen on P3HT and P3HT: PCBM blend10.1016/j.solmat.2010.03.012 ↗
25. A photochemical study of poly(3-hexylthiophene)10.1021/ma00017a017 ↗
26. Effect of temperature on the morphological and photovoltaic stability of bulk heterojunction polymer:fullerene solar cells10.1016/j.solmat.2008.01.006 ↗
27. Disorder-induced open-circuit voltage losses in organic solar cells during photoinduced burn-in10.1002/aenm.201500111 ↗
28. Photodegradation of P3HT a systematic study of environmental factors10.1021/cm102373k ↗
29. Morphological and electrical control of fullerene dimerization determines organic photovoltaic stability10.1039/C5EE02912K ↗
30. The effect of PCBM dimerization on the performance of bulk heterojunction solar cells10.1002/aenm.201300693 ↗
31. Morphological stability and performance of polymer–fullerene solar cells under thermal stress: the impact of photoinduced PC60BM oligomerization10.1021/nn404687s ↗
32. Failure of silver nanowire transparent electrodes under current flow10.1186/1556-276X-8-235 ↗
33. Decamethylcobaltocene as an efficient n-dopant in organic electronic materials and devices10.1016/j.orgel.2008.03.003 ↗
34. Interface materials for organic solar cells10.1039/b921624c ↗
35. Metal residues in semiconducting polymers: impact on the performance of organic electronic devices10.1021/mz500590d ↗
36. ESR spectroscopy for monitoring the photochemical and thermal degradation of conjugated polymers used as electron donor materials in organic bulk heterojunction solar cells10.1039/C4CC08146C ↗
37. Solvent effects on the morphology and stability of PTB7:PCBM based solar cells10.1016/j.solener.2016.08.018 ↗
38. Solution-processed metal oxides as efficient carrier transport layers for organic photovoltaics10.1002/smll.201502258 ↗
39. Sputtered NiO as electron blocking layer in P3HT:PCBM solar cells fabricated in ambient air10.1016/j.solmat.2010.10.014 ↗
40. Device lifetime improvement of polymer-based bulk heterojunction solar cells by incorporating copper oxide layer at Al cathode10.1063/1.3580629 ↗
41. Highly efficient and stable inverted polymer solar cells integrated with a cross-linked fullerene material as an interlayer10.1021/ja100236b ↗
42. Delineation of degradation patterns of C60-based organic solar cells under different environments10.1063/1.4923091 ↗
43. Interfacial materials for organic solar cells: recent advances and perspectives10.1002/advs.201500362 ↗
44. Conductivity, work function, and environmental stability of PEDOT:PSS thin films treated with sorbitol10.1016/j.orgel.2008.05.006 ↗
45. Highly efficient inverted organic photovoltaics using solution based titanium oxide as electron selective contact10.1063/1.2402890 ↗
46. C60:LiF blocking layer for environmentally stable bulk heterojunction solar cells10.1002/adma.201002738 ↗
47. Low-temperature, solution-processed, layered V2O5 hydrate as the hole-transport layer for stable organic solar cells10.1039/c3ee42204f ↗
48. P3HT:PCBM, best seller in polymer photovoltaic research10.1002/adma.201100792 ↗
49. Reducing the efficiency-stability-cost gap of organic photovoltaics with highly efficient and stable small molecule acceptor ternary solar cells10.1038/nmat4797 ↗
50. Influence of processing and intrinsic polymer parameters on photochemical stability of polythiophene thin films10.1016/j.polymdegradstab.2012.07.021 ↗
51. Enhancing the thermal stability of polythiophene:fullerene solar cells by decreasing effective polymer regioregularity10.1021/ja064434r ↗
52. Enhanced regeneration of degraded polymer solar cells by thermal annealing10.1063/1.4878408 ↗
53. Correlation of charge transport with structural order in highly ordered melt-crystallized poly(3-hexylthiophene) thin films10.1002/polb.23297 ↗
54. Efficient solar cells are more stable: the impact of polymer molecular weight on performance of organic photovoltaics10.1039/C6TA00721J ↗
55. Effects of annealing on the nanomorphology and performance of poly(alkylthiophene): fullerene bulk-heterojunction solar cells10.1002/adfm.200601038 ↗
56. Phase diagram of P3HT/PCBM blends and its implication for the stability of morphology10.1021/jp804151a ↗
57. Electron barrier formation at the organic-back contact interface is the first step in thermal degradation of polymer solar cells10.1002/adfm.201304166 ↗
58. On the glass transition of polymer semiconductors and its impact on polymer solar cell stability10.1021/acs.chemmater.5b00024 ↗
59. Reducing burn-in voltage loss in polymer solar cells by increasing the polymer crystallinity10.1039/C4EE01842G ↗
60. Degradation and stability of polymer-based solar cells10.1039/c2jm33645f ↗
61. High‐entropy mixtures of pristine fullerenes for solution‐processed transistors and solar cells10.1002/adma.201503530 ↗
62. Glass forming acceptor alloys for highly efficient and thermally stable ternary organic solar cells10.1002/aenm.201702741 ↗
63. Dual function additives: a small molecule crosslinker for enhanced efficiency and stability in organic solar cells10.1002/aenm.201401426 ↗
64. Organic photovoltaics: crosslinking for optimal morphology and stability10.1016/j.mattod.2015.04.001 ↗
65. Stabilization of the nanomorphology of polymer-fullerene “bulk heterojunction” blends using a novel polymerizable fullerene derivative10.1039/b505361g ↗
66. Stabilizing polymer-based bulk heterojunction solar cells via crosslinking10.1002/pi.4712 ↗
67. Reliability of small molecule organic photovoltaics with electron‐filtering compound buffer layers10.1002/aenm.201601094 ↗
68. ESR spectroscopy as a powerful tool for probing the quality of conjugated polymers designed for photovoltaic applications10.1039/C4CC06197G ↗
69. Acceleration factor for ageing measurement of dye solar cells10.1016/j.microrel.2012.08.016 ↗
70. Temperature dependence for the photovoltaic device parameters of polymer-fullerene solar cells under operating conditions10.1063/1.1412270 ↗
71. Regiocontrolled synthesis of poly(3-alkylthiophenes) mediated by Rieke zinc: their characterization and solid-state properties10.1021/ja00106a027 ↗
72. Controlling electronic transitions in fullerene van der Waals aggregates via supramolecular assembly10.1021/acsami.6b06800 ↗
73. Correlation between near infrared-visible absorption, intrinsic local and global sheet resistance of poly(3,4-ethylenedioxy-thiophene) poly(styrene sulfonate) thin films10.1063/1.3697402 ↗
74. Influence of interface doping on charge-carrier mobilities and sub-bandgap absorption in organic solar cells10.1021/acs.jpcc.5b00124 ↗
75. Sub-bandgap absorption in polymer-fullerene solar cells studied by temperature-dependent external quantum efficiency and absorption spectroscopy10.1016/j.cplett.2012.05.063 ↗
76. Photothermal deflection spectroscopy and detection10.1364/AO.20.001333 ↗
77. Reliable extraction of organic solar cell parameters by combining steady-state and transient techniques10.1016/j.orgel.2012.09.008 ↗
78. An effective area approach to model lateral degradation in organic solar cells10.1002/aenm.201500835 ↗
79. Enhanced electrical conductivity in regioselectively synthesized poly(3-alkylthiophenes)10.1039/c39920000070 ↗
80. The first regioregular head-to-tail poly(3-hexylthiophene-2,5-diyl) and a regiorandom isopolymer: nickel versus palladium catalysis of 2(5)-bromo-5(2)-(bromozincio)-3-hexylthiophene polymerization10.1021/ja00051a066 ↗
81. A simple method to prepare head-to-tail coupled, regioregular poly(3-alkylthiophenes) using grignard metathesis10.1002/(SICI)1521-4095(199903)11:3<250::AID-ADMA250>3.0.CO;2-J ↗
82. Poly(3-hexylthiophene): synthetic methodologies and properties in bulk heterojunction solar cells, Energ
83. Advances in molecular design and synthesis of regioregular polythiophenes10.1021/ar800130s ↗
84. The effect of residual palladium catalyst on the performance and stability of PCDTBT:PC70BM organic solar cells10.1016/j.orgel.2015.10.001 ↗
85. Assessing the outdoor photochemical stability of conjugated polymers by EPR spectroscopy10.1039/C6TA04605C ↗
86. Light-induced generation of free radicals by fullerene derivatives: an important degradation pathway in organic photovoltaics?10.1039/C7TA00175D ↗
87. Encapsulation for long-term stability enhancement of perovskite solar cells10.1016/j.nanoen.2016.09.041 ↗
88. A simple method to evaluate the effectiveness of encapsulation materials for perovskite solar cells10.1016/j.solener.2016.09.038 ↗
89. Characterization of the polymer energy landscape in polymer:fullerene bulk heterojunctions with pure and mixed phases10.1021/ja505463r ↗
90. Recent advances to understand morphology stability of organic photovoltaics10.1007/s40820-016-0107-3 ↗
91. Upscaling of polymer solar cell fabrication using full roll-to-roll processing10.1039/b9nr00430k ↗
92. Influence of doping on charge carrier collection in normal and inverted geometry polymer:fullerene solar cells10.1038/srep03335 ↗
93. Light intensity dependence of External Quantum Efficiency of fresh and degraded organic photovoltaics10.1016/j.solmat.2015.09.020 ↗
94. Charge extraction with linearly increasing voltage: a numerical model for parameter extraction10.1016/j.solener.2011.02.028 ↗
95. Züfle · 2017
96. Temperature induced order–disorder transition in solutions of conjugated polymers probed by optical spectroscopy10.1021/acs.jpclett.6b01641 ↗
97. Interplay between intrachain and interchain interactions in semiconducting polymer assemblies: the HJ-aggregate model10.1063/1.4705272 ↗
98. Enhanced charge-carrier mobility in high-pressure-crystallized poly(3-hexylthiophene)10.1021/ma102529f ↗
99. On the role of single regiodefects and polydispersity in regioregular poly(3-hexylthiophene): defect distribution, synthesis of defect-free chains, and a simple model for the determination of crystallinity10.1021/ja210871j ↗
100. Reconsidering figures of merit for performance and stability of perovskite photovoltaics10.1039/C7EE02956J ↗