journal article·2018-12

Molten carbonate salts for advanced solar thermal energy power plants: Cover gas effect on fluid thermal stability

Sonia Fereres, Cristina Prieto, Pau Giménez-Gavarrell, Alfonso Rodríguez, Pedro Enrique Sánchez-Jiménez, Luis A. Pérez-Maqueda

Publisher page

Abstract

The eutectic mixture Li2CO3-Na2CO3-K2CO3 is investigated as a high temperature heat transfer fluid and storage medium alternative for molten salt solar thermal power plants. This salt has an operating temperature range of 400–700 °C, enabling the use of higher temperature/efficiency power cycles. However, this carbonate mixture is known to thermally decompose in air. This study evaluates the thermal stability of the salt mixture under different cover gases: air, nitrogen, carbon dioxide, and an 80/20 carbon dioxide/air mixture. Initial characterization is performed through thermogravimetric analysis (TGA), followed by larger scale testing in a custom-made reactor to simulate conditions closer to its practical use. The results show improved thermal stability with a CO2 atmosphere. The decomposition kinetics under different cover gases are estimated from TGA data. However, larger-scale, longer duration experiments show much slower decomposition rates compared to the classical TGA approach. These findings indicate that the main contribution to mass loss in TGA is due to vaporization rather than thermal decomposition. Thus, a proper evaluation of the molten salt´s thermal stability can only be obtained from reactor experiments where vaporization is inhibited. Very long induction periods (of the order of days) are observed, suggesting that the kinetic decomposition mechanism is a nucleation and growth type. Other considerations for future plants incorporating these high temperature salts are discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Chemical Looping and Thermochemical Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Concentrating solar power10.1021/acs.chemrev.5b00397 ↗
2. Mehos · 2017
3. Review of heat transfer fluids in tube-receivers used in concentrating solar thermal systems: properties and heat transfer coefficients10.1016/j.rser.2015.10.059 ↗
4. Molten salt power towers operating at 600–650 °C: salt selection and cost benefits10.1016/j.solener.2018.01.063 ↗
5. Molten carbonates for advanced and sustainable energy applications: Part I. Revisiting molten carbonate properties from a sustainable viewpoint
6. Experimental study on optimized composition of mixed carbonate salt for sensible heat storage in solar thermal power plant10.1016/j.solener.2011.05.004 ↗
7. SQM.2016, SQM’s Thermo-Solar Salts (Salt Factsheet), Antwerpen, Belgium: SQM Europe, 2016. (Online). Available: 〈www.sqm.com〉.
8. Coupled experimental study and thermodynamic modeling of melting point and thermal stability of Li2CO3-Na2CO3-K2CO3 based salts10.1115/1.4027264 ↗
9. The thermal stability of molten lithium–sodium–potassium carbonate and the influence of additives on the melting point10.1115/1.4006895 ↗
10. Physical properties data compilations relevant to energy storage. II. molten salts: data on single and multi-component salt systems
11. Improving the thermal properties of ternary carbonates for concentrating solar power through simple chemical modifications by adding sodium hydroxide and nitrate10.1016/j.solmat.2014.01.025 ↗
12. Corrosion resistance of HR3C to a carbonate molten salt for energy storage applications in CSP plants10.1016/j.solmat.2016.08.014 ↗
13. Corrosion resistance of Cr/Ni alloy to a molten carbonate salt at various temperatures for the next generation high-temperature CSP plants10.1016/j.solener.2018.06.091 ↗
14. Viscosity of the eutectic dilithium carbonate-disodium carbonate-dipotassium carbonate melt10.1021/je00048a016 ↗
15. Kinetic and thermodynamic characterization of enhanced carbon dioxide absorption process with lithium oxide-containing ternary molten carbonate10.1021/acs.est.6b02955 ↗
16. One-pot synthesis of carbon nanofibers from CO210.1021/acs.nanolett.5b02427 ↗
17. P. Gimenez-Gavarrell, V. Romanin, S. Fereres, Latent heat of fusion and melting temperature of molten salt based carbon nanotube suspensions used as phase change materials, in: Proceedings of the ASME 9th International Conference Energy Sustainability, vols. ES2015-49791, 2015.10.1115/ES2015-49791 ↗
18. P. Gimenez-Gavarrell, S. Fereres, An experimental study of the effect of SiO2 nanoparticles on the phase change characteristics of KNO3-NaNO3 mixtures for thermal energy storage, in: Proceedings of the ASME 2015 International Mechanical Engineering Congress & Exposition (IMECE 2015), Houston, TX, 2015.10.1115/IMECE2015-52022 ↗
19. 20 - high-temperature molten salts for solar power application
20. T. Bauer, N. Breidenbach, N. Pfleger, M. Eck, Overview of molten salt storage systems and material development for solar thermal power plants, in: Proceedings of the World Renewable Energy Forum 2012 - WREF 2012, 2012.
21. A. Kruizenga, J. Cordaro, Preliminary development of thermal stability criterion for alkali nitrates, Sandia National Laboratories, SAND2011-5837C, 2011.
22. Effect of heating rates and composition on the thermal decomposition of nitrate based molten salts10.1016/j.egypro.2015.03.075 ↗
23. Thermal stability and viscosity behaviors of hot molten carbonate mixtures10.1016/j.expthermflusci.2013.04.006 ↗
24. New insights on the kinetic analysis of isothermal data: the independence of the activation energy from the assumed kinetic model10.1021/ef502269r ↗
25. Thermal stability of potassium carbonate near its melting point10.1016/S0040-6031(98)00289-5 ↗
26. Analysis of evaporation and thermal decomposition of ionic liquids by thermogravimetrical analysis at ambient pressure and high vacuum10.1039/c0gc00876a ↗
27. Determination of vapor pressure and thermal decomposition using thermogravimetrical analysis10.1016/j.tca.2015.03.020 ↗
28. Determination of volatility of ionic liquids at the nanoscale by means of ultra-fast scanning calorimetry10.1039/c3cp54325k ↗