Spectral properties of AlCrNO-based multi-layer solar selective absorbing coating during the initial stage of thermal aging upon exposure to air
Source abstract
Abstract
Abstract A spectrally selective Cr/AlCrN/AlCrNO/AlCrO multi-layer absorber coating has been designed and deposited on stainless steel substrates by the cathodic arc ion plating technique. The spectral properties of the multi-layer coating during the initial stage of thermal aging in air were investigated with the aim of achieving a basic understanding of its relation to microstructure. The composition, structure and surface morphology of the coatings were characterized using XRD, SEM, XPS, TEM and AFM, while the optical properties of the coatings were measured by spectrophotometers. The experimental results indicate that the multi-layer coating with a high solar absorptance of 0.90 and a relatively low emittance of 0.15 are obtained through parameter optimization. The structure analysis suggests that the as-deposited AlCrN and AlCrNO layers, acting as the main absorbers, are consisted of the AlN, Cr2N and AlN, CrN, Cr2N nanocrystallites embedding in amorphous matrix, respectively. While the AlCrO layer, acting as the anti-reflection layer, is consisted of mainly amorphous. After annealing at 500 °C for 2 h in air, a solar selectivity of 0.94/0.12 was achieved while the thermal emittance attained 0.25 at 500 °C. Based on the microstructural analysis, the enhancement in absorptance of the multi-layer AlCrNO-based coating during the initial stage of thermal aging could be attributed to the decomposition of Cr2N nanocrystallites and the recrystallization of the AlCrN and AlCrNO layers. While the enhanced emittance after annealing can be ascribed to the decomposition of the macro-droplets and the decrease of surface roughness. These results could provide new insights into rational use of the muti-layer coatings and spectral properties tuning of solar-selective functional multi-layer coatings and thus promote the development of coatings for photo-thermal conversion at high temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solar Thermal and Photovoltaic Systems · Photovoltaic System Optimization Techniques · solar cell performance optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Thermal stability test and ageing mechanisms study of different solar selective absorbing coatings10.1016/j.surfcoat.2016.08.092 ↗
2. High performance multi-scaled nanostructured spectrally selective coating for concentrating solar power10.1016/j.nanoen.2014.06.016 ↗
3. A review on thermal stability and high temperature induced ageing mechanisms of solar absorber coatings10.1016/j.rser.2016.09.083 ↗
4. Solar selective coatings
5. The investigation of thermal stability of Al/NbMoN/NbMoON/SiO2 solar selective absorbing coating10.1016/j.solmat.2017.06.056 ↗
6. Coatings for concentrating solar systems-A review10.1016/j.rser.2015.01.015 ↗
7. Recent progress in high-temperature solar selective coatings10.1016/S0927-0248(99)00136-1 ↗
8. Review of physical vapor deposited (PVD) spectrally selective coatings for mid- and high-temperature solar thermal applications10.1016/j.solmat.2011.10.028 ↗
9. Long-term thermal stability of CrAlO-based solar selective absorbing coating in elevated temperature air10.1016/j.solmat.2014.12.009 ↗
10. Functional multi-layer nitride coatings for high temperature solar selective applications10.1016/j.solmat.2013.10.024 ↗
11. Functional multi-layer solar spectral selective absorbing coatings of AlCrSiN/AlCrSiON/AlCrO for high temperature applications10.1016/j.solmat.2016.04.007 ↗
12. A review on thermal stability and high temperature induced ageing mechanisms of solar absorber coatings10.1016/j.rser.2016.09.083 ↗
13. Angular solar absorptance and thermal stability of Mo-SiO2 double cermet solar selective absorber coating10.1016/j.solener.2015.02.013 ↗
14. Structure and thermal stability of spectrally selective absorber based on AlCrON coating for solar-thermal conversion applications10.1016/j.solmat.2016.05.035 ↗
15. High temperature stable solar selective coatings by cathodic arc PVD for heat collecting elements10.1016/j.solmat.2015.11.012 ↗
16. Thermal aging test of AlCrNO-based solar selective absorbing coatings prepared by cathodic arc plating10.1016/j.solmat.2015.01.015 ↗
17. Degradation of selective solar absorber surfaces in solar thermal collectors-An EIS study10.1016/j.solmat.2016.10.015 ↗
18. Effects of antireflection layers on the optical and thermal stability properties of a spectrally selective CrAlN-CrAlON based tandem absorber10.1016/j.solmat.2015.02.010 ↗
19. Measurement of high temperature emissivity and photothermal conversion efficiency of TiAlC/TiAlCN/TiAlSiCN/TiAlSiCO/TiAlSiO spectrally selective coating10.1016/j.solmat.2017.06.057 ↗
20. A study of the oxidation behavior of CrN and CrAlN thin films in air using DSC and TGA analyses10.1016/j.surfcoat.2007.11.037 ↗
21. The spectral properties and thermal stability of CrAlO-based solar selective absorbing nanocomposite coating10.1016/j.solmat.2013.12.010 ↗
22. Importance of the spectral emissivity measurements at working temperature to determine the efficiency of a solar selective coating10.1016/j.solmat.2015.04.009 ↗
23. First spectral emissivity study of a solar selective coating in the 150–600 °C temperature range10.1016/j.solmat.2013.07.002 ↗
24. Influence of temperature-induced copper diffusion on degradation of selective chromium oxy-nitride solar absorber coatings10.1016/j.solmat.2015.10.034 ↗
25. Preparation of superfine-grained high entropy alloy by spark plasma sintering gas atomized powder10.1016/j.intermet.2015.08.012 ↗
26. Microstructure and mechanical properties of quaternary Cr-Si-O-N films by a hybrid coating system10.1016/j.surfcoat.2011.11.012 ↗
27. Profiling nitrogen in ultrathin silicon oxynitrides with angle-resolved x-ray photoelectron spectroscopy10.1063/1.373090 ↗
28. Spectroscopic ellipsometry measurements of chromium nitride coatings10.1116/1.1405513 ↗
29. A comparative study of the oxidation behavior of Cr2N and CrN coatings10.1016/j.tsf.2013.01.031 ↗
30. Materials for thermal conduction10.1016/S1359-4311(01)00042-4 ↗
31. Polychromic Al-AlN cermet solar absorber coating with high absorption efficiency and excellent durability10.1016/j.solmat.2015.07.049 ↗
32. Colored solar selective absorbing coatings with metal Ti and dielectric AlN multilayer structure10.1016/j.solmat.2013.03.041 ↗
33. Optimizing analysis of W-AlN cermet solar absorbing coatings10.1088/0022-3727/34/21/303 ↗