Fabrication and characterization of multiscale, fractal textured solar selective coatings
Source abstract
Abstract
Abstract Photothermal conversion efficiency depends significantly on the selectivity of the thermal receiver surface through which a heat transfer fluid flows in a concentrated solar power system. This paper presents studies on novel multiscale, fractal textured solar selective coatings for solar thermal applications. The fractal surfaces are fabricated integrally on the substrate material using electrodeposition. The coatings are described in terms of fractal parameters that are uniquely determined from surface measurements, and the optical properties of the coatings are experimentally characterized in detail in terms of the fractal parameters. The effects of heat treatment on the optical properties of coatings over a range of fractal parameters are also described. The study is presented considering coatings on copper to demonstrate that fractal texturing of the surface provides a nearly three-fold performance improvement compared to coatings with no texturing or heat treatment. The findings equally apply to other materials used in higher temperature solar thermal applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solar Thermal and Photovoltaic Systems · Fluid Dynamics and Thin Films · Surface Modification and Superhydrophobicity
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. SunShot, Energy Efficiency and Renewable Energy, U.S. Department of Energy, SunShot Vision Study. NREL Report No. BK5200-47927, DOE/GO-102012-3037 (Accessed May 2017).
2. The value of concentrating solar power and thermal energy storage10.1109/TSTE.2010.2052078 ↗
3. Electrochemically grown cobalt-alumina composite layer for solar thermal selective absorbers10.1016/j.solmat.2014.07.041 ↗
4. Tandem structured spectrally selective coating layer of copper oxide nanowires combined with cobalt oxide nanoparticles10.1016/j.nanoen.2014.10.018 ↗
5. Stability of W-Al2O3 cermet based solar coating for receiver tube operating at high temperature10.1016/j.solmat.2010.04.080 ↗
6. Optimization and preparation of Pt-Al2O3 double cermet as selective solar absorber coatings10.1016/j.jallcom.2015.12.201 ↗
7. Laser nanostructured Co nanocylinders-Al2O3 cermets for enhanced & flexible solar selective absorbers applications10.1016/j.apsusc.2015.04.098 ↗
8. High-performance solution-processed plasmonic Ni nanochain-Al2O3 selective solar thermal absorbers10.1063/1.4766730 ↗
9. Correlation of optical properties with the fractal microstructure of black molybdenum coatings10.1016/j.apsusc.2009.09.108 ↗
10. M. Lazarov, A. Brunotte, T. Eisenhammer, R. Sizmann, W. Graf, V. Wittwer, Effects of roughness on TiNxOy-Cu selective absorbers, in: Proceedings of the SPIE 1727, Optical Materials Technology for Energy Efficiency and Solar Energy Conversion XI: Selective Materials, Concentrators and Reflectors, Transparent Insulation and Superwindows, November 25, 1992, pp. 34–45.10.1117/12.130499 ↗
11. Computations of the optical properties of metal/insulator-composites for solar selective absorbers10.1016/S0960-1481(02)00033-2 ↗
12. Structural and optical properties of copper-coated substrates for solar thermal absorbers10.1016/j.spmi.2016.08.031 ↗
13. The effect of substrate surface preparation on the optical properties of a black chrome solar absorber coating10.1016/S0038-092X(87)80032-4 ↗
14. Engineering Gaussian disorder at rough interfaces for light trapping in thin-film solar cells10.1364/OL.37.004868 ↗
15. Role of fractal geometry in roughness characterization and contact mechanics of surfaces10.1115/1.2920243 ↗
16. Fractal model of elastic-plastic contact between rough surfaces10.1115/1.2920588 ↗
17. Interlaminar contact development during thermoplastic fusion bonding10.1002/pen.10960 ↗
18. Fractal dimension analysis of machined surface depending on coated tool wear10.1016/j.surfcoat.2004.07.020 ↗
19. Fabricating superhydrophobic surfaces via a two-step electrodeposition technique10.1021/la403509d ↗
20. Gwyddion: an open-source software for SPM data analysis
21. Solar selective coatings for concentrating solar power central receivers
22. Solar selective absorber functionality of carbon nanoparticles embedded in SiO2, ZnO and NiO matrices
23. Optical, thermal and structural characteristics of carbon nanoparticles embedded in ZnO and NiO as selective solar absorbers10.1016/j.solmat.2008.04.023 ↗
24. Chemical vapor deposition of low reflective cobalt (II) oxide films10.1016/j.apsusc.2015.10.188 ↗
25. Fractal model for wettability of rough surfaces10.1021/acs.langmuir.7b01524 ↗