journal article·2017-06

Transparent conductive polymers for laminated multi-wire metallization of bifacial concentrator crystalline silicon solar cells with TCO layers

A.B. Chebotareva, G.G. Untila, T.N. Kost, A.S. Stepanov, S.N. Salazkin, V.V. Shaposhnikova

Publisher page

Abstract

Abstract Replacing expensive silver with inexpensive copper for the metallization of silicon wafer solar cells can lead to substantial reductions in material costs associated with cell production. A promising approach is the use of multi-wire design. This technology uses many wires in the place of busbars, and the copper wires are “soldered” during the low-temperature lamination process to the fingers (printed or plated) or to the transparent conductive oxide (TCO) layer, e.g. in the case of the a-Si:H/c-Si heterojunction cells. Here we describe a solar cell design in which wires are attached to TCO layers using transparent conductive polymer (TCP) films. To this end, we have synthesized a number of thermoplastics, poly(arylene ether ketone) copolymers (co-PAEKs), containing phthalide in their main chain. The fraction of phthalide-containing units in the copolymers was p =3, 5, 15, and 50 mol%. With increasing p , the peak strain temperature of the co-PAEKs rises from 205 to 290 °C and their optical band gap and refractive index increase from 3.12 to 3.15 eV and from 1.6 to 1.614, respectively. The copolymers have a negligible absorption coefficient in the wavelength range 400–1100 nm. When exposed to an excess pressure of 1 atm or above, co-PAEK films less than 30 µm in thickness undergo a transition from a dielectric to a conductive state. The resistivity ( ρ С ) of wire/TCP/TCO (ITO=In 2 O 3 :Sn and IFO=In 2 O 3 :F) contacts ranges from 0.37 to 1.43 mΩ cm 2 . The polymer with the highest phthalide content ( p =50 mol%) has the lowest ρ С . The average work of adhesion per unit area determined by pulling off the wires from the polymer surface depends on both the phthalide content of the co-PAEKs and their reduced viscosity, ranging from 14.3 to 43.5 N/cm. The highest value was obtained for the co-PAEK with p =50 mol%. We have fabricated low-concentration bifacial IFO/(n + pp + )Cz-Si/ITO solar cells with a wire contact grid attached to IFO and ITO using a co-PAEK film. The efficiency of the best cell under 1× to 7× front/rear illumination was determined to be 18.3–18.9%/15.0–15.6%.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (65)

Show source-provided references
1. A cost roadmap for silicon heterojunction solar cells10.1016/j.solmat.2015.12.026 ↗
2. Evolution of metal plating for silicon solar cell metallization10.1002/pip.2221 ↗
3. Ag requirements for silicon wafer-based solar cells10.1002/pip.1125 ↗
4. Development status of high-efficiency HIT solar cells10.1016/j.solmat.2010.04.030 ↗
5. Effective optimization of indium tin oxide films by a statistical approach for shallow emitter based crystalline silicon solar cell applications10.1016/j.solmat.2014.03.011 ↗
6. Periodically patterned Si pyramids for realizing high efficient solar cells by wet etching process10.1016/j.solener.2015.04.034 ↗
7. Effective passivation of silicon surface by AZO films: application in bifacial solar cells10.1016/j.solener.2013.09.005 ↗
8. Bifacial 8.3%/5.4% front/rear efficiency ZnO:Al/n-Si heterojunction solar cell produced by spray pyrolysis
9. Effects of indium concentration on the efficiency of amorphous In–Zn–O/SiOx/n-Si hetero-junction solar cells10.1016/j.solmat.2013.11.003 ↗
10. Hydrogen-doped indium oxide/indium tin oxide bilayers for high-efficiency silicon heterojunction solar cells10.1016/j.solmat.2013.03.024 ↗
11. L. Serenelli, M. Miliciani, M. Izzi, R. Chierchia, A. Mittiga, M. Tucci, Advances in screen printing metallization for a-Si:H/c-Si heterojunction solar cells, in: Proceedings of the 40th IEEE Photovoltaics Specialists Conference, 2014, pp. 2528–2532.10.1109/PVSC.2014.6925445 ↗
12. Optimization of the deposition and annealing conditions of fluorine-doped indium oxide films for silicon solar cells10.1134/S1063782613030275 ↗
13. 24.7% record efficiency HIT solar cell on thin silicon wafer10.1109/JPHOTOV.2013.2282737 ↗
14. Enhanced photocurrent of Si solar cell with the inclusion of a transparent indium tin oxide thin film10.1063/1.4897656 ↗
15. Amorphous silicon/crystalline silicon heterojunction solar cells10.1016/B978-0-12-388417-6.00003-9 ↗
16. Summary of the 5th Workshop on Metallization for crystalline silicon solar cells10.1016/j.egypro.2015.03.282 ↗
17. Novel low-temperature-sintering type Cu-alloy pastes for silicon solar cells10.1016/j.egypro.2012.05.009 ↗
18. Non-Contacting busbars for advanced cell structures using low temperature copper paste10.1016/j.egypro.2015.03.293 ↗
19. Silicon heterojunction solar cells with copper-plated grid electrodes: status and comparison with silver thick-film techniques10.1109/JPHOTOV.2014.2321663 ↗
20. The multi-busbar design: an overview10.1016/j.egypro.2013.11.092 ↗
21. New cell metallization patterns for heterojunction solar cells interconnected by the Smart Wire Connection Technology10.1016/j.egypro.2015.03.039 ↗
22. 〈http://www.meyerburger.com/en/products-systems/technologies/photovoltaic/swct/〉.
23. T. Soderstrom, P. Papet, J. Ufheil, Smart wire connection technology, in: Proceedings of the 28th European Photovoltaic Solar Energy Conference , 2013, pp. 495–499.
24. Multi-wire interconnection of busbar-free solar cells10.1016/j.egypro.2014.08.109 ↗
25. A new type of high-efficiency bifacial silicon solar cell with external busbars and a current-collecting wire grid10.1134/1.2128464 ↗
26. Bifacial concentrator Ag-free crystalline n-type Si solar cell10.1002/pip.2471 ↗
27. Concentrator bifacial Ag-free LGCells10.1016/j.solener.2013.11.034 ↗
28. A.B. Chebotareva, G.G. Untila, T.N. Kost, A.N. Lachinov, V.M. Kornilov, S.N. Salazkin, Conducting transparent polymers as a new material for photovoltaic applications, in: Proceedings of the 21th European Photovoltaic Solar Energy Conference, 2006, pp. 291–293.
29. A.B. Chebotareva, G.G. Untila, T.N. Kost, A.N. Lachinov, V.M. Kornilov, S.N. Salazkin, V.V. Shaposhnikova, Transparent wide-band polymers for silicon solar cells with TCO layers, in: Proceedings of the 27th European Photovoltaic Solar Energy Conference, 2012, pp. 344–348.
30. A.N. Lachinov, S.N. Salazkin, Electrically active polymer and material built around it, Russian Patent no. 2256967 C1, 2004.
31. Lachinov, Electron energy distributions in a metal-polymer-vacuum system10.1134/S1063776106080097 ↗
32. Synthesis of polyarylenephthalides prospective as smart polymers10.1134/S0965545X08030024 ↗
33. Aromatic polymers based on pseudoacid chlorides
34. Electronics of thin layers of wide-band polymers10.1070/PU2006v049n12ABEH006176 ↗
35. General features of the reaction of 4,4'-difluorobcnzophenone with potassium diphenoxide of 2,2-bis(4-hydroxyphenyI)propane10.1007/BF01435391 ↗
36. New possibilities for efficient effect of charge transport in phthalide-containing poly(arylene ether ketones)10.1134/S1811238209010081 ↗
37. Synthesis and photovoltaic properties of n-type conjugated polymers alternating 2,7-carbazole and arylene diimides10.1016/j.solmat.2012.04.041 ↗
38. Synthesis and characterization of conjugated polymers containing low-bandgap arylene vinylene units10.1016/j.solmat.2012.02.001 ↗
39. ITO deposited by pyrosol for photovoltaic applications10.1016/j.tsf.2007.03.097 ↗
40. Effect of conditions of deposition and annealing of indium oxide films doped with fluorine (IFO) on the photovoltaic properties of the IFO/p-Si heterojunction10.1134/S1063782608040076 ↗
41. Effect of the tin content on the composition and optical and electrical properties of ITO films deposited onto silicon and glass by ultrasonic spray pyrolysis10.1134/S1063782612070202 ↗
42. Obtaining the specific contact resistance from transmission line model measurements10.1109/EDL.1982.25502 ↗
43. Fluorine doped indium oxide films for silicon solar cells10.1016/j.tsf.2009.02.152 ↗
44. Contact resistance of indium tin oxide and fluorine-doped indium oxide films grown by ultrasonic spray pyrolysis to diffusion layers in silicon solar cells10.1016/j.solmat.2015.01.018 ↗
45. Multi-wire metallization for solar cells: contact resistivity of the interface between the wires and In2O3:Sn, In2O3:F and ZnO:Al layers10.1016/j.solener.2016.12.049 ↗
46. Zimon · 1977 · 352
47. Passivation of boron-doped p+-Si emitters in the (p+nn+)Si solar cell structure with AlOx grown by ultrasonic spray pyrolysis10.1016/j.solener.2013.08.041 ↗
48. Effect of the temperature during deposition of AlOx films by spray pyrolysis on their passivating properties in a silicon solar cell10.1134/S1063782612060255 ↗
49. R.A. Sinton, A..Cuevas, A quasi-steady state open-circuit voltage method for solar cell characterization, in: Proceedings of the 16th European Photovoltaic Solar Energy Conference, 2000, pp. 1152–1155.
50. A review and comparison of different methods to determine the series resistance of solar cells10.1016/j.solmat.2007.05.026 ↗
51. Highly conductive and transparent films of tin and fluorine doped indium oxide produced by APCVD10.1016/0040-6090(92)90811-O ↗
52. Spectroscopic ellipsometry studies of index profile of indium tin oxide films prepared by spray pyrolysis10.1016/S0169-4332(02)00656-6 ↗
53. Optical properties of polymeric materials for concentrator photovoltaic systems10.1016/j.solmat.2011.02.025 ↗
54. The influence of the chromium tricarbonyl fragment π-bonded to a polyetherketone and the photostability and radiation stability of a polymer matrix
55. n-Si bifacial concentrator solar cell10.1134/S1063782612090229 ↗
56. Charge-induced relaxation in polymers10.1103/PhysRevLett.37.1075 ↗
57. Excitons, polarons, and bipolarons in conducting polymers
58. Modulation of optical absorption in poly(diphenylenephthalide) films near the switching threshold10.1134/S1063783410010336 ↗
59. STM surface modification of the Si–SiO2 polymer10.1016/S0167-9317(03)00327-7 ↗
60. L. Rebenklau, P. Gierth, U. Partsch, H. Mehlich, J. Hausmann, M. Grimm, W. Stein, H. Bell, C. Clement, F. Vogg, Low temperature interconnection techniques for high efficiency heterojunction solar cells, in: Proceedings of the 27th European Photovoltaic Solar Energy Conference, 2012, pp. 281–284.
61. Y.-J. Chien, M.-Y. Chen, J. Chang, J. Liu, Y.-L. Chang, M.-Y. Huang, P.-C. Yang, Metallization optimization for high efficiency silicon heterojunction solar cells using low-temperature paste screen printing, in: Proceedings of the 28th IEEE Photovoltaic Specialist Conference, 2013, pp. 2187–2190.10.1109/PVSC.2013.6744909 ↗
62. G. Untila, A. Chebotareva, T. Kost, M. Zaks, A. Sitnikov, O. Solodukha, Edge effect in bifacial laminated grid Cz silicon solar cell, in: Proceedings of the 20th European Photovoltaic Solar Energy, 2005, Conference pp. 1255–1258.
63. Bifacial solar photovoltaics – A technology review10.1016/j.rser.2016.03.041 ↗
64. A review of concentrator silicon solar cells10.1016/j.rser.2015.07.035 ↗
65. High efficiency screen printed bifacial solar cells on monocrystalline CZ-silicon10.1002/pip.1018 ↗