Transferable TiO2 nanotubes membranes formed via anodization and their application in transparent electrochromism
Source abstract
Abstract
Abstract Here, we developed a novel and facile approach to fabricating TiO 2 Nanotubes Membranes (TNMs) with thicknesses between 539 and 1930 nm. These were detached from a Ti substrate through immersion in water, followed by adhesion to a conducting fluorine-doped tin oxide (FTO) glass using an adhesion layer and annealing in order to form an anatase crystalline structure for transparent electrochromic applications. The possible mechanism of the TNM separation process in deionized water was evaluated using contact angle analysis, transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). The TNM electrodes exhibited remarkable electrochromic performances, combining high coloration contrast with a transmittance of 65% in the visible spectrum and good cycle stability, which was maintained at 88.2% for initial optical modulation after 1000 cycles. These TNMs may advance the design of efficient and low-cost electrodes operating in the visible light spectrum that are intended for photo electrochemical applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Transition Metal Oxide Nanomaterials · TiO2 Photocatalysis and Solar Cells · Analytical Chemistry and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Photoconductive, free-standing crystallized TiO2 nanotube membranes10.1016/j.electacta.2013.01.116 ↗
2. TiO2 nanotube arrays based flexible perovskite solar cells with transparent carbon nanotube electrode10.1016/j.nanoen.2014.11.042 ↗
3. Simultaneous etching and doping of TiO2 nanowire arrays for enhanced photoelectrochemical performance10.1021/nn4040876 ↗
4. Electrochemically conductive treatment of TiO2 nanotube arrays in AlCl3 aqueous solution for supercapacitors10.1016/j.jpowsour.2015.06.052 ↗
5. TiO2 nanotubes with tunable morphology, diameter, and length: synthesis and photo-electrical/catalytic performance10.1021/cm802384y ↗
6. One-dimensional titanium dioxide nanomaterials: nanotubes10.1021/cr500061m ↗
7. TiO2 nanotube arrays of 1000μm length by anodization of titanium foil: phenol red diffusion10.1021/jp075258r ↗
8. X. Meng, T.-Y. Lee, H. Chen, D.-W. Shin, K.-W. Kwon S.J. Kwon, J.-B. Yoo, Fabrication of Free Standing Anodic Titanium Oxide Membranes with Clean Surface Using Recycling Process, vol. 10, 2010, pp. 4259–4265.10.1166/jnn.2010.2209 ↗
9. Formation and characterization of self-organized TiO2 nanotube arrays by pulse anodization10.1021/ja076092a ↗
10. Bipolar anodization enables the fabrication of controlled arrays of TiO2 nanotube gradients10.1039/C4TA04247F ↗
11. Hierarchical DSSC structures based on "single walled" TiO2 nanotube arrays reach a back-side illumination solar light conversion efficiency of 8%10.1039/C4EE03729D ↗
12. Robust superamphiphobic film from electrospun TiO2 nanostructures10.1021/am302790d ↗
13. Synthesis and growth mechanism of multilayer TiO2 nanotube arrays10.1039/c2nr30315a ↗
14. Continuous fabrication of free-standing TiO2 nanotube array membranes with controllable morphology for depositing interdigitated heterojunctions10.1021/cm102622x ↗
15. Synthesis of periodically structured titania nanotube films and their potential for photonic applications10.1002/smll.201002098 ↗
16. Electrochemical doping of anatase TiO2 in organic electrolytes for high-performance supercapacitors and photocatalysts10.1039/C3TA13963H ↗
17. Transparent TiO2 nanotube electrodes via thin layer anodization: fabrication and use in electrochromic devices10.1021/la9004399 ↗
18. Electrochromic properties of TiO2 nanotubes coated with electrodeposited MoO310.1039/c3nr03666a ↗
19. Multistage coloring electrochromic device based on TiO2 nanotube arrays modified with WO3 nanoparticles10.1002/adfm.201002258 ↗
20. Formation of double-walled TiO2 nanotubes and robust anatase membranes10.1002/adma.200801189 ↗
21. Self-organized nano-tubes of TiO2–MoO3 with enhanced electrochromic properties10.1039/b820953g ↗
22. Anodically formed transparent mesoporous TiO2 electrodes for high electrochromic contrast10.1039/c2jm31244a ↗
23. Electrochromic properties of TiO2 nanotubes coated with electrodeposited MoO310.1039/c3nr03666a ↗
24. Facile fabrication of free-standing TiO2 nanotube membranes with both ends open via self-detaching anodization10.1016/j.elecom.2010.05.027 ↗
25. Facile fabrication of aligned doubly open-ended TiO2 nanotubes, via a selective etching process, for use in front-illuminated dye sensitized solar cells10.1039/c2cc33629d ↗
26. Design and coupling of multifunctional TiO2 nanotube photonic crystal to nanocrystalline titania layer as semi-transparent photoanode for dye-sensitized solar cell10.1039/c2ee22854h ↗
27. Long vertically aligned titania nanotubes on transparent conducting oxide for highly efficient solar cells10.1038/nnano.2009.226 ↗
28. High-efficiency dye-sensitized solar cells based on robust and both-end-open TiO2 nanotube membranes10.1186/1556-276X-6-475 ↗
29. Doubly open-ended TiO2 nanotube arrays decorated with a few nm-sized TiO2 nanoparticles for highly efficient dye-sensitized solar cells10.1039/C4TA02360A ↗
30. Dye-sensitized solar cells employing doubly or singly open-ended TiO2 nanotube arrays: structural geometry and charge transport10.1021/am503934s ↗
31. A reliable TiO2 nanotube membrane transfer method and its application in photovoltaic devices10.1016/j.electacta.2011.11.118 ↗
32. A simple and facile approach for synthesis of a free-standing TiO2 nanotube layer and its photovoltaic application10.1039/c2ra22059h ↗
33. An efficient photoanode consisting of TiO2 nanoparticle-filled TiO2 nanotube arrays for dye sensitized solar cells10.1016/j.jpowsour.2014.06.139 ↗
34. A facile route to fabricate an anodic TiO2 nanotube-nanoparticle hybrid structure for high efficiency dye-sensitized solar cells10.1039/c2nr31268a ↗
35. Highly efficient solar water splitting from transferred TiO2 nanotube arrays10.1021/acs.nanolett.5b01406 ↗
36. Growth, detachment and transfer of highly-ordered TiO2nanotube arrays: use in dye-sensitized solar cells10.1039/b800660a ↗
37. Composite WO3/TiO2 nanostructures for high electrochromic activity10.1021/am5050696 ↗
38. High-contrast electrochromic switching using transparent lift-off layers of self-organized TiO2 nanotubes10.1002/smll.200701244 ↗
39. A simple method for preparation of through-hole porous anodic alumina membrane10.1021/cm049971u ↗
40. Formation mechanism of porous anodic aluminium and titanium oxides10.1002/adma.200800845 ↗
41. Initiation and Growth of self-organized TiO2 nanotubes anodically formed in NH4F∕ (NH4)2SO4 electrolytes10.1149/1.2008980 ↗
42. Formation, microstructures and crystallization of anodic titanium oxide tubular arrays10.1039/b820504c ↗
43. Wettability conversion of colloidal TiO2 nanocrystal thin films with UV-switchable hydrophilicity10.1039/b823331d ↗
44. Gradient control of the adhesive force between Ti/TiO2 nanotubular arrays fabricated by anodization10.1038/srep07178 ↗
45. Solubility of hidrogen and carbon monoxide in water and some organic solvents
46. A study of the advancing interface: II. Theoretical prediction of the dynamic contact angle in liquid-gas systems10.1016/0021-9797(83)90287-4 ↗
47. Contact angle and wetting Properties
48. Reversible oxygen scavenging at room temperature using electrochemically reduced titanium oxide nanotubes10.1038/nnano.2015.51 ↗
49. Hydrothermally processed TiO2 nanowire electrodes with antireflective and electrochromic properties10.1021/nn300787r ↗
50. Electrochromism of rutile nanowires, vertically aligned along the [001] direction, due to alkali metal ion intercalation10.1039/c1jm13084f ↗
51. Enhanced electrochromic properties of a TiO2 nanowire array via decoration with anatase nanoparticles10.1039/C4TC00911H ↗
52. Highly-efficient electrochromic performance of nanostructured TiO2 films made by doctor blade technique10.1016/j.solmat.2010.09.028 ↗