Electrical and optical studies of flexible stainless steel mesh electrodes for dye sensitized solar cells
Source abstract
Abstract
Abstract Stainless steel (SS) mesh was used to fabricate anodes for flexible dye sensitized solar cells (DSSC) in order to evaluate them as replacements for more expensive Transparent Conductor Oxides (TCO's). SS mesh performance was analyzed and it was determined that oxidation of SS during the sintering of titania particles affects the transport and interface resistance of the device. Thus a thin layer of non-porous titania coating was added onto the mesh to protect the electrode from oxidation. Comparing with Fluorine doped Tin Oxide (FTO), SS mesh was found to have higher interface resistance but the overall series resistance was lower due to higher conductivity of metals. The effects of SS mesh opening size and microstructure on the performance of the device was analyzed and design strategies to obtain high efficiency flexible SS mesh DSSC are provided.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: TiO2 Photocatalysis and Solar Cells · ZnO doping and properties · Advanced Photocatalysis Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Recent advances in sensitized mesoscopic solar cells10.1021/ar900141y ↗
2. Photovoltaic performance of plastic dye-sensitized electrodes prepared by low-temperature binder-free coating of mesoscopic titania10.1149/1.2712140 ↗
3. An approach to laminated flexible dye sensitized solar cells10.1016/j.electacta.2007.06.028 ↗
4. Optimization of dye-sensitized solar cells prepared by compression method10.1016/S1010-6030(02)00072-2 ↗
5. A new method for manufacturing nanostructured electrodes on plastic substrates10.1021/nl0055254 ↗
6. Low-temperature fabrication of dye-sensitized plastic electrodes by electrophoretic preparation of mesoporous TiO2 layers10.1149/1.1796931 ↗
7. Electrophoretically deposited TiO2 photo-electrodes for use in flexible dye-sensitized solar cells10.1016/j.jphotochem.2004.12.023 ↗
8. U.S. Geological Survey, Indium statistics, in: T.D., Kelly, G.R., Matos, (Comps.), Historical Statistics for Mineral and Material Commodities in the United States: U.S. Geological Survey Data Series 140, 2010, available online at: http://pubs.usgs.gov/ds/2005/140/ (Accessed July 2010.)
9. Industrial sheet metals for nanocrystalline dye-sensitized solar cell structures10.1016/j.solmat.2006.05.002 ↗
10. A 4.2% efficient flexible dye-sensitized TiO2 solar cells using stainless steel substrate10.1016/j.solmat.2005.04.025 ↗
11. The characterization of nanocrystalline dye-sensitized solar cells with flexible metal substrates by electrochemical impedance spectroscopy10.1149/1.2374943 ↗
12. A study of stainless steel-based dye-sensitized solar cells and modules10.1016/j.solmat.2007.01.007 ↗
13. Fabrication of an efficient dye-sensitized solar cell with stainless steel substrate10.1149/1.2909548 ↗
14. Effect of increased surface area of stainless steel substrates on the efficiency of dye-sensitized solar cells10.1063/1.2996017 ↗
15. Conductive mesh based flexible dye-sensitized solar cells10.1063/1.2475623 ↗
16. High density, non-porous anatase titania thin films for device applications10.1088/0022-3727/33/21/303 ↗
17. Conversion of light to electricity by cis-XzBis( 2,2′-bipyridyl-4,4′-dicarboxylate) ruthenium(II) charge-transfer sensitizers (X=C1−, Br−, I−, CN−, and SCN−) on nanocrystalline Ti02 electrodes10.1021/ja00067a063 ↗
18. Influence of the temperature of film formation on the electronic structure of oxide films formed on 304 stainless steel10.1016/S0013-4686(01)00658-2 ↗
19. Photoelectric behavior of sintered TiO2 electrodes10.1021/j100282a016 ↗
20. Electron paramagnetic resonance studies of doped TiO2 colloids10.1021/j100369a064 ↗